Keeranur TP - 15th FC - Drilling of Bore well and water supply Arrangement at 1st ward bus stand near in Keeranur Town Panchayat

Charges for conducting Geological survey

Drilling of 160mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc

Supply and fixing of 200mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,

Supply and fixing of 200mm dia. PVC Borewell cover including alll labour chages and all T&P etc., End cup

Supply and delivery of Water supply Materials inculding loading, unloding and transporting etc., complete 3 HP Submercible motor (Motor should give 50 lpm x 75m head)

3 HP Panel board

4.00 sq.mm submercible cable

40mm dia ISI UPVC Pipe

1000 litres capacity HDPE tank

40mm dia.Non-Return Valve

40mm dia. Hex Nipple

40mm dia. GI Union

40 mm x32mmdia.GI Reducer

32mm dia ISI G.I. Pipe

32 mm dia. GI Ellbow

32 mm dia. GI coupling(Heavy)

25mm dia ISI G.I Bend

25mm dia ISI Gate valve

Adopter

Bore Kitty

40mm dia ISI Gate valve

25 mm UPVC Pipe

Supplying and fixing of32A aerial fuse unit for 3 Nos fuse units (500v) on suitable TW concelled box with hylam sheet on the tapping pole with necessary clamps. SD132

Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection mains(SD68)

Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade in 32mm GI Pipe suitably bent at both ends with necessary angle iron upright and end supports for mains(SD73)

Supply and fixing of TNEB meter board suitable for 32A Three phase service connection with 32A fuse unit (500V) 32Aneutral link and earth link (1"X1/8"copper flat) on TW plank of size 600mmX450mmX19mm with supporting TW reepers of 1" tk.on either side (SD127)

Labour charges for errection of Submercible motor with panel board , pipes and cables etc.,

Plastering with C.M 1:5 12mm thick including cost and conveyance to site laying finishing curing etc., complete.

Supplying and fixing the Steel Door using MS Angle and flat including cost and conveyance of all labour charges.

Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification

Painting the new walls two coats over one coat of priming with best cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers

M/s. Hari Constructions