REPAIR TO FLOOR, JOINERY, PLASTERING, PLUMBING AND SANITARY FITTING WORKS IN SINGLE OFFICERS ACCN AT AF STN NAL

Amount

Demolition of cement concrete in any position and removing the rubbish outside MoD land complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land, complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed.

Material and labour brick work with sub class ‘B’ bricks burnt clay old size of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

All as per item No. 4.00 above but as in half brick thick walls built in cement mortar 1:4

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

M& L Granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick bedding layer CM 1:6 including Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L 20mm thick Granite machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick cement plaster in CM 1:4 including Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete complete all as specified and directed.

M& L Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, including grinding and polishing Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete complete complete all as specified and directed.

M&L for vitrified light shade ceramic tiles 9 mm thick polished, area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as item No.10 above but in skirting and over 10mm cement backing in CM 1:4.

M&L for coloured glazed tiles of size 300x450x7mm / 300x600x7mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick backing coat in CM 1:4, all as specified and directed

Material and labour non-skid, ceramic coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer complete all as specified.

M&L 75mm thick PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternet bays, surfaces finished even & smooth whtiout using extra cement including making joints complete all as specified and directed.

Material and labour 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded crushed stone aggregate) thick as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed.

M&L for Sand filling under floors, floor finishes, paver blocks or in foundations including watering and consolidation all as specified and as directed.

M&L for Rubber moulded precast cement concrete interlocking paver block with made by table vibratory method with any pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over PCC over sand cushioning all as specified and directed.

S&F Non skid ceramic outdoor floor tiles 10 mm thick (square) area of each tile exc 0.06 sqm but n exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges and the like finished fair and even including necessary form work complete all as specified and directed.

Dismantling complete false ceiling/boarding, any description, fixed in any position with fixed with screws, complete all as specified and directed.

M&L Gypsum Board False Ceiling straight or curve any profile which includes G.I. Perimeter Channels of size 0.55mm thick (having One Flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling,screw fixed to brick wall / partition with the help of Nylon sleeves and screws at 610mm centres. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the soffit at 900mm centres with ceiling angle of width 25mm X 10mm X 0.55mm thick fixed to soffit with G.I. cleat and steel expansion fasteners. Ceiling section of 0.55mm thick having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457 mm centres 12.5mm tapered edge Gypboard (conforming to IS 2095-1982) is then screw fixed to ceiling section with 25mm dry wall screws at 230mm centres. Screw fixing is done mechanically with drilling machine with suitable attachment.

Finally tapered edges of the Gypsum boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper/fibre tape and two coats of dry wall top coat suitable for Gypsum board etc. complete as per the recommended practices / specifications of the manufacturer. Including two coats of primer suitable for gypsum board two or more coats of plastic emulsion paint of approved shade and also including making necessary openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitable fixed all complete as per drawing and specification and direction.Rate to be inclusive of shadow profile at the junction of wall & ceiling, in between of ceiling, etc. complete. including all fittings approved, complete all as specified and directed. Note:-(a) The design of ceiling will be done in multi layers as per the direction of Eng-in-Charge and overlapping area will be measured & paid accordingly.

S&F in repair Corner glass shelf (Set of 3) with CP brackets and railing 300mmx300mm size as per sample approved all as specifed and directed.

S&F in repair Glass Shelf 600mm long with CP brackets and railing as per sample approvedcomplete all as specifed and directed.

S&F in repair CP Towel Ring 150mm Square/round incl fixing complete all as specified.

S&F in repair Towel Rack 600mm Long with Lower Hangers,incl 3 hooks Stainless Steel fixed in repairs complete all as specified directed.

S&F in repair HD perimeter circle lighted mirror of size 1016x1016x43mm including fixing complete all as specified and directed by Engr -in-charge.

S&F in repair square/Ovel shape wall mounted full pedestal wash basin size 545mm x 489mm complete all as specified and directed.

S&F in repair Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses Hot and cold mixer fixed to wash hand basin incl all fixing accesaries complete all as specified.

S&F in repair Toilet Roll Holder size 150mm with Stainless Steel Flap fixed to walls with chromium plated (CP) brass screws,all as specified and directed.

S&F in repair Soap dish holder stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified.

S&F in repair Soap Dispenser with Metallic Bottle fixed with brass screws and rawl plug complete all as specified.

S&F in repair Tumbler Holder stainless steel chromium plated fixed with brass screws complete all as specified.

S&F in repair Angular Stop Cock CP with Wall Flange15mm complete all as specifed and directed.

S&F in repair 15mm long body bib taps long shank cast copper alloy with crutch or butterfly hadle secrwed for iron piper or for brass ferrule complete all as specified and directed.

S&F in repair Rimless Single Piece-WC with soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360x730x740 mm, complete all as specified directed.

S&F in repair Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) complete all as specified directed.

S&F in repair Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified directed.

S&F in repair Hand Shower 140mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System fixing to steel pipe or union complete all as specified directed.

S&F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified.

Taking down GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls , complete all as specified and as directed.

Taking down GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls, complete all as specified and as directed.

S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls , complete all as specified and as directed.

S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls , complete all as specified and as directed.

M&Lin repair for PVC (SWR) floor trap with CP grating , plain including jointing with solvent cement outlet dia 75 mm, complete all as specified and as directed.

M&L in repair for PVC (SWR) floor trap plain with CP grating including jointing with solvent cement outlet dia 100 mm , complete all as specified and as directed.

Demolition and breaking up drain pipes 110/75 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall & laid in trenches or in floors, including clamps as required, complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall & laid in trenches or in floors, including clamps as required, complete all as specified and directed.

S&F PVC(SWR) bends 110 mm dia, complete all as specified and as directed.

S&F PVC(SWR) bends 75 mm dia.with access door, complete all as specified and as directed.

S&F PVC(SWR) bends 75 mm dia complete all as specified, complete all as specified and as directed.

S & F PVC (SWR) vent cowl of 110 mm bore complete, complete all as specified and as directed.

S & F PVC (SWR) vent cowl of 75 mm bore complete, complete all as specified and as directed.

Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames), complete all as specified and as directed.

Taking down chowkats or frame exc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames), complete all as specified and as directed.

Taking down door shutter of any description exc 1.00 sqm but n. exc. 2.00 sqm each complete all as specified and directed.

S & F pressed steel frames 125x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified

S & F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing,lungs,hinges,lock strike plate, etc, complete all as specified and as directed.

S&F 35 mm thick plain framed, pannelled shutter (any number of panels) with panel of timber flat on both sides (feather edged) or of vaneered particle board medium density , wood particle board with commercial face veneers, supplied and fitted complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side face is covered with approved laminated with lipping/frame to match complete all as specified and directed.

M&L 35mm thick 2nd class hard wood glazed & gauged skeleton shutters open rebated and prepared to received glass/gauge etc ( without sash bars) edges of framing plains chamfered or rounded fitted with cut and mitered bead for securing glass etc .all as specified .Note : - Wire mesh and glazing shall be measured and paid separatly in respected items .

S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, reinforced with MS square tube, as per specification and drawing in SSR Part-II

S&F Factory made solid PVC moulded door shutter with particle board core 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face strip of 20mm width struck inside with solvent cement for stiles and Prelam colour 10mm thick PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of Prelam colour 10 mm thick PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing as per SSR.

S&F 100 mm long aluminium alloy anodised butt hinges and fixed fixed with stainless steel screws complete all as specified and directed.

S&F 150 mm long aluminium alloy anodised handles, fabricated type polished fixed with stainless steel screws screws complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section fixed with stainless steel screws screws complete all as specified and directed.

S&F 300 MM long aluminium anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheets cast of excruded section and fixing bolt and slidingbolts of extruded ections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed.

Supply and fixing in repair 150 mm floor door stopper hanging type, consisting two leg aluminium anodised natural shade matt finish aluminium rod with rubber shoe,, complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples,complete all as specified and as directed.

S&F in repair Stainless steel ( SS 202 grade ) Curtain rod 25 mm dia 0.80 mm wall thickness, mild steel, chromium plated including supporitng brackets as per sample complete all specified and directed.

S&F in repairs Stainless steel (Grade 305) ornmental type brackets (Open ends) suitable for curtain rods of 25mm dia complete all specified and directed.

S&F in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 25mm dia complete all specified and directed.

Taking down cement plaster on brick or stone surfacs including raking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smoth without using extra cement, complete all as specified and as directed.

M&L rendering 10 mm thick on ceiling (brick or concrete surfaces) in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of Plastic emulsion over a coat of primer, over and including a two coat of white putty complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces on walls and applying two coats of exterior acrylic emulsion over and including a coat of primer, in camouflaging pattern approved by GE, complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specifed and directed.

Material and labour Complete removal of existing treatment incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying Two coat of Plastic emulsion over a coat of primer, over and including a two coat of birla white putty complete all as specified & directed.

Material and Labour Complete removal of existing treatment of wall including washing rubbing down and stopping of distempered or painted surfaces including all cornices, pilasters etc( plastered or unplastered) etc and applying two coat of acrylic exterior emulsion paint over and including a coat of primer, of approved colour/shade as in camouflaging pattern approved by GE complete all as specified and directed by complete all as specified and directed.

Material and labour preparation of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified.

M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L preparation of old painted surfaces of wood based surfaces of any description exc 10 cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primercomplete all as specified & directed.

Material & Labour prepapration of new or previously untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer comlplete all as specified and directed.

M&L preparation of old painted surfaces of Steel and Iron work of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint on steel surface complete all as specified & directed.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows,ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings , complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,rollers & dust proof brush for sliding door / window complete all as per architectural drawings , complete all as specified and as directed.

S & F 4.80 mm thick sheet glass of ordinary quality plain /tinted and including glazing with suitable rubber beads etc , complete all as specified and as directed.

S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anode coating of grade AC15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminum standard section around the opening, all complete as per requirement , complete all as specified and as directed.

S&F conceled lock (push to unlock) for sliding window made with zinc body, aluminium hook and anti rust material with power coated metallic finish of approved colour having size 100mm x 24 mm incl necessary cutting for fixing all as specified and directed.

S&F in repair 12mm thick Toughned glass as in Bathroom cubical or partitions/Doors with fixing of all necessary fitting & fixtures complete all as specified and directed. Note:- Fitting/Fixtures will be paid under following subject Items.

Supply Only Wall to glass hinges, Glass to Glass hinges, complete all as specified and directed.

Supply only wall to glass connector, Floor clamp, complete all as specified and directed.

Supply only Stablizer rod with Knobs, Plastic parts, complete all as specified and directed.

Supply only Towel rod/door handle, complete all as specified and directed.

Supply and fixed as in repair ornamental design gumti made of Red Stone (Bulmera) of all over size 1.0m x 0.4m x 0.4m consisting of conical shape Dome of size (0.4m x 0.4m x 0.4m) and 04 Nos column of size (0.02m x 0.02m x 0.6m) fixed over RCC/Brick column fixed with araldite or epoxy based mortar up to any height complete all as specified and directed. Note: Red stone (Bulmera) Dome shall be fixed on the existing RCC/Brick pillar

M/S ASHRAFI CONSTRUCTION CO (BID ID -3082768)