RENEWAL /IMPROVEMENT TO CIVILIAN QUARTERS AT AF STATION OJHAR

Amount

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided and removal of rubbish, complete all as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as directed.

Material & labour for 25 mm thick PCC sub base 1:2:4 type B-0 using 12.5 mm graded broken stone aggregate as in under layer over including spreading cement slurry @ 3 Kg per sq.m before PCC for laying tiles in floors all as specified and directed.

Material and labour for non skid coloured ceramic tiles of area exceeding 0.11 sqm but not exceeding 0.18 sqm each tile and of thickness 7mm to 8mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement mortar 1:6 screed bed in floors complete all as specified and directed.

All as in item No. 06 herein before but area of each tile not exceeding 0.11 sqm.

All as in item No. 06 herein before but in vertical surfaces as in skirting including 10 mm thick cement mortar 1:4 as a backing coat.

Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 7 mm design and concept all as per manufacturers catalogue as approved on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over and including 10mm thick backing coat in CM 1:4 all as specified and directed.

Material and labour for polished machine cut kota stone slab 20-25 mm thick over 15 mm thick cement screed base in CM 1:6 as in riser of steps, treads etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding on edges of steps roughning by making grooves at treads complete all as specified and directed. Note : Kota stone shall be best quality and in one piece shall be provided in treads and raiser and necessary cutting for baluster of railing shall be made rate shall be deemed in quoted item and nothing shall be paid extra on this account.

Taking down GI tubing 15 mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store complete all as directed.

All as in item No. 11 herein before but 20 mm bore.

Supply and fix 20 mm bore CPVC SDR 11 pipes (concealed including cutting chases and making good in CM 1:4) and plain CPVC SDR 11 fiitings with and including provision of all fittings and fixtures of ISI marked such as bends, elbows, Tees, short pieces, back nuts, connectors, diminishing pieces caps pegs and clamps, unions etc fixed to walls and ceilings or laid in floors complete including fixing with adhesive /solvents all as directed.

All as in item No. 13 herein before but 25 mm bore.

Supply and fix in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with CI P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete all as specified and as directed

Supply and fix vitreous china wash hand basin, white, angle back of size 400 x400mm excluding taps, chain and plug and porcelain stopper but including CI brackets and CP waste fittings and PVC waste pipe of 32mm dia complete all as specified and directed

Supply & fix in repairs PVC low level flushing cistern of syphonic action type 10 litres capacity fixed to wall with brackets and screwed including PVC flush pipe complete all as specified.

Supply and fix in repairs PVC connections "15 mm size of length 450 mm" with PTMT nuts all as specified and all as directed.

Supply and fix in repairs chromium plated angle valve type stop cock suitable for 15mm dia fancy type screwed at both ends down high pressure with capstan head complete all as specified and as directed

Supply and fix in repair bib tap in repairs of 15 mm bore, long body foam flow with flange, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of approved make and all as directed. Make : Prayag Cat No. PIS-08 or Jainko Cat No. LBJ-1 or equivalent in Jaquar.

Supply and fix fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : Prayag Cat No. 8304 or Jainko Cat No. PCJ-3 or equivalent in Jaquar.

Supply and fix in repairs chromium plated shower rose, 125 mm dia with or without swivel joints including fixing to steel pipe or union of 15 mm dia including shower rod all as directed. Make : Prayag Cat No. BS 79 or Jainko Cat No. FSJ-1 or equivalent in Jaquar.

Supply and fix in repairs brass chromium plated conceled stop cock 15 mm dia, in position conceled in walls/ceilings or floors complete including making grooves & filled with cement mortar in 1:4 fiinished to match with adjacent surfaces complete all as specified and as directed. Make : Prayag Cat No. PIS 18 or Jainko Cat No.CSV-1 or equivalent in Jaquar.

Supply and fix in repair soap dish stainless steel of standard size as approved by GE all as specified and directed. Make : Prayag Cat No. BA-45 or Jainko Cat No. SDJ-1 or equivalent in Jaquar.

Supply and fix in repair brass chromium plated tubular towel rail D type 20mm dia 600 mm long between flanges all as directed. Make : Prayag Cat No. BA-40 or Jainko Cat No. TRJ-2 or equivalent in Jaquar.

Supply and fix sinks made of 1mm thick stainless steel sheet for kitchen or laboratery with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever MS brackets of suitable size and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make : - Nirali/Prayag/Neel Kamal

Supply & fix cast iron floor trap diameter of outlet in 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and as directed.

All as in item No. 28 herein before but cast iron nahani trap.

Demolition and breaking up drain pipes of any dia (Salt glazed ware, AC or PVC Pipes) set in cement mortar all as directed.

Supply and fix 100 mm bore cast iron spun pipe soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joint all as directed.

Supply & fix cast iron spun pipe, soil, waste and vent pipes of dia 100 mm in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Supply and fix 100 mm dia cast iron spun pipe bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply & fix cast iron vent cowl 100 mm dia complete as directed.

Supply and fix cast iron spun pipe branch pieces, single(equal or unequal) or with parallel branches 100 mm dia with oval eyedoor ordinary or inverted (spigot or socket type) all as directed.

Supply and fix for 160 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps all as specified and directed. Note : item to be executed in scattered area

Supply & fix PVC (SWR) bends 160 mm dia complete as directed.

Supply & fix PVC (SWR) shoe 160 mm dia complete as directed.

Supply and fix 50mm dia low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, ceiling or under floors all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting /removing holdfasts and making good dismantled portion with cement morter 1:3 or cement concrete 1:2:4 type B1, walls exceeding half brick but not exceeding one bricks thick complete all as specified and directed.

Taking down chowkat with shutters without taking off shutter from the frame area not exceeding 1.5 sqm each all as specified and as directed.

Taking down shutter only of any description of area not exceeding 1.0 sqm each from the window by cutting hinges using necessary welding etc., and griding the existing steel surface for achieving smooth finish surfaces each complete all as as directed..

All as in item No. 41 herein before but the frame area exceeding 1.5 sqm each but not exceeding 4.0 sqm each.

Supply and fix for second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.

Supply & fix factory made solid panel PVC door frame of size 50mm x 47mm made out of 10 mm plain colour PVC sheet & edges will be printed to match with printed sheet reinforced with MS Square tube, complete all as specified and directed.

Supply and fix 35 mm thick second class hard wood factory made framed panel shutters (two panels) with panels of timber flat on both sides (feather edge) or veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically presurred treated all as directed.

Supply and fix 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to recive glass gauze, etc divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads or securing glass etc: sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a) and directed

Supply and fix powder coated anodised aluminium sliding window with anodized aluminium frame of 3 track with size 92 mm x 32 mm x 1.3 mm thick, 02 glass and 01 stainless steel wire mesh sliding shutters with necessary channels (top rail, bottom rail and style of size 40 mm x 18 mm x 1.10 mm thick ) including glazing with tinted sheet glass panel 4.00 mm thick, fitted with necessary jointing cleats, glazing clips, rubber packing, locking device used as handle also 01 No. in each shutter powder coated aluminium beading, screws complete all as specified

Supply and fix mild steel framed work such as grills, gratings, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165 fixed to wooden frame or welded to steel frame complete all as specified and directed.

Supply and fix powder coated anodised aluminium frame for louvers of size 75 mm x 40 mm x 1.60 mm including 3.00 mm thick frosted glass & fixed SS wire mesh outer side with standard aluminium section and glazing cleat and revolving arrangement with standard section of aluminium including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks etc complete all as specified

Material and labour for preparation of old painted steel surface of any description over 10 cm in width or girth not other wise described and applying one coat of synthetic enamel paint all as specified.

Supply and fix butt hinge, medium weight, cold rolled mild steel 100mm long with necessary bolts all as specified and as directed.

Supply and fix 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fix aluminium, anodised, barrel tower bolt of extruded section, 100 mm long all as specified and as directed

All as in item No. 55 herein before but 150 mm.

Supply and fix ISI marked extruded aluminium alloy handle cast type anodised 150 mm long all as specified and as directed.

Supply and fix aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

Material and labour for machine cut Cudappah stone slab 20-25mm thick over cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in cooking platform cills and jambs including rubbing and polishing complete necessary cutting, notching etc for sink all as specified and directed.

Material and labour for drilling holes for insertion of pipes etc in granite /Cudappah including RCC slab not exceeding 25mm dia and not exceeding 100 mm depth complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement shall be cut as required to facilitate demolition) not exceeding 15 cm thickness as in slab kitchen platform and other similar suspended work all as specified and directed

Material and labour for reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like all as specified and as directed.

Supply & fix mild steel TMT bar of 10 mm dia and over cut length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia complete all as directed.

Material and labour to sides and soffits of floor or roof beams, beam haunching , girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams complete all as specified & directed.

Demolition of brick or stone/ boulder masonry, built in cement /cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material & labour for brickwork with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed.

Material & labour for brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on brick masonry or concrete surfaces of walls, chajjas, slab projection, facia etc and finished fair and even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar 1:6 on brick masonry or concrete surfaces and finished fair and even and smooth without using extra cement complete all as specified and as directed.

Material & labour for rendering 5mm thick in cement mortar 1:3 on fair faces of or concrete surfaces of ceiling finished even and smooth without using extra cement all as specified and as directed

Material and labour applying 3 coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Material and labour applying 2 coats of white wash on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Material and labour applying 3 coats of white wash on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Material and labour for applying two coats of oil emulsion distemper over a coat of wall care putty not less than 1.5 mm thick so as to have smooth surface before applying OBD including coat of primer all as specified and as directed.

All as in item No. 74 herein before but on old surfaces of wall including complete removal of existing treatment.

Material and labour for preparation of new wooden surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Material and Labour for complete removal of existing treatement on old plastered surfaces of walls including washing cleaning and making good surface before application of primer including minor repair of broken concrete /brick surfaces with cement mortar 1:4 wherever required and applying two coats of exterior acrylic emulsion weathercoat of berger / Asian (Apex) or equivalent in specified makes of any colour over a coat of exterior water based wall primer all as specified and directed complete. Note : This item includes provision of scaffolding for the treatment of external surfaces of building with required safety measures etc.

Material and labour for preparation of newly plastered surfaces and applying two coats of exterior acrylic emulsion weather proof paint over one coat of priming paint plaster coat on external surface on wall complete all as specified and as directed. Note : This item includes provision of scaffolding for the treatment of external surfaces of building with required safety measures etc.

Material and Labour for complete removal of existing treatement on old plastered surfaces of walls and applying two coats of exterior acrylic emulsion weathercoat of berger / Asian (Apex) or equivalent in specified makes of any colour over a coat of exterior water based wall primer all as specified and directed complete. Note : This item includes provision of scaffolding for the treatment of external surfaces of building with required safety measures etc.

Supply & fix stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples on existing wooden frame including 1st class HW beading complete all as directed.

Supply and fix mild steel ordinary rat tails 300 mm size pattern springs including roller and roller plate complete

Material and labour for 75mm thick PCC 1:3:6 mix type C-1 20mm graded aggregates as in plinth protection finished even fair including making joints every at 2.5 m and at corner all as specified and directed.

Material and labour for construction joints 30 mm deep x 10 mm wide and filled with sealing compound of grade A and balance portion filled with backup rod as a filler etc complete all as specified and directed.

Materials and labour for repairs to sunken floor slab with the following specifiacation:- (a) Demolition of PCC and taking out oldbrick bat filling and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) Filling with averaging 50mm thick PCC 1:2:4, type B-0, using 12.5mm graded stone agregate as in sunken floor, with proper slope towards GI spout. (c) Providing 15 mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3 % by weight of cement over bottom and vertical surfaces finishing the surfaces even and smooth without using extra cement. (d) Damp proof course on horizontal surfaces with preparation and applying one coat of self priming (33% dilution) and two coats of undiluted material with @ 10.67 litres per 10 sqm smart care damp proof of asian paint or equivalent for water proofing and damp proof course and on vertical surfaces preparation of surfaces and applying one coat of self priming (33% dilution) and one coat of undiluted material with @ 4.85 litre per 10 sqm smart care damp proof for water proofing . (e) Brick bats filling under sunken floor. (f) PCC 1:3:6 type C-2 using 20 mm graded stone complete all as directed.

All as in item No. 84 herein before but area not exc 0.36 sqm as in kitchen trap, wash basin traps etc.

NOTE : (i) The work shall be carried out in four storeyed building of approximate 14.00 mtr height. (ii) All demolished /dismantlled materials for which schedule of credit has not been catered and found unserviceable shall be removed to outside the defence land at contractors own arrangements.

INTERNAL ELECTRIFICATION

Taking down carefully aluminium/copper point wiring (light, fan, socket power etc) on TW batten/PVC conduit including all fitting/fixtures and making good disturbed surfaces of wall/floor/ceiling etc to match the adjoining surfaces all as directed.

Disconnecting electric supply and taking down the light fittings any type and making good to the disturbed surfaces complete all as directed.

Material and labour for concealed point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sqmm 1100 Volts, FRLS grade drawn through and including PVC conduit not less than 20 mm medium grade as per IS with all fittings such as bends, tee, junction boxes etc of suitable size concealed in walls, ceilings etc. & including MS/GI sunken boxes with modular inner and surface plate for housing modular switches, sockets, regulators etc and one run of 1.5 Sqmm PVC insulated, unsheathed, multistranded, copper conductor cable FRLS grade and connected to common earth dully complete for one light/fan/call bell point controlled by one 1-way switch complete all as specified and as directed. Note :- Cutting and making good of chasis in the wall/ceiling /floor is deemed to be included in the quoted rates.

All as per item No. 88 above herein before but One 3 pin socket out let 5 Amps on same/below board with other switches.

All as per item No. 88 above herein before but One 3 pin socket out let 5 Amps on independent board.

All as per item No. 88 above herein before but Two 2-way switch.

All as in item No. 88 herein before but with two runs of 2.5 Sq.mm cable and one run 2.5 Sq.mm cable as earth wire.

Supply and fixing modular switch one way 16 Amp, 1 module all as specified and directed.

Supplying and fixing modular socket, 16 amps 6 pin multipin, 2 module complete all as specified and as directed.

All as per item No. 93 above herein before but 6 Amps. Make : Legrand Mylinc Cat No. 675501 or equivalent in Anchor Roma/Crabetree

All as per item No. 94 above herein before but 6 Amps 2-3 pin combined. Make : Legrand Mylinc Cat No. 675500 or equivalent in Anchor Roma/Crabetree

Supply and fix modular bell push 6 Amps, 1 module all as specified and as directed. Make:- Legrand /Anchor /Roma /Crab tree.

Supply & fix in modular fan regulator electronic step type 230V, 2 module complete all as specified and as directed.

Supply and fix electric bell ding dong /musical AC 230 Volts, Single pole complete all as specified and as directed.

Supply & fix ceiling rose surface type, PVC/ Polycarbonate insulated body of size 50x28 mm two to three terminals.

Supply and fix in repairs MCB SP 6-32 Amp AC 240V 50 Hz, C series complete all as specified and directed. Make: Legrand Cat No. 4085 95 or equivalent in specified makes.

Supply and fix in repairs MCB SPN 6-32 Amp AC 240V 50 Hz, C series complete all as specified and directed. Make: Legrand Cat No. 408617or equivalent in specified makes.

Supply and fixing in repair sheet metal enclosure for DB's SPN when MCBs to be used single pole and neutral glazed door, 240 volt IP 43 with 200 amps rated bus bar 8 way complete all as directed. Make :- Legrand Cat No 507621 are equivalent in L&T /Siemens as approved.

Supply and fixing in repair sheet metal enclosure for DB's SPN 2 way, 240 volts for independent mounting complete all as directed. Make :- Legrand Cat No 507791are equivalent in L&T /Siemens as approved.

Supply & fix in repair decorative ultra slim linear LIGHT LINEA lighting fixture extruded polycarbonate, environmental friendly, energy efficient ready to use pack 20W LED 6500K, complete all as specified and directed. Make : Crompton Cat No. LDLL-20-CDL or equivalent in Bajaj/ Havells/Philips.

All as in item No. 105 herein before but 10W. Make : Crompton Cat No. LDLL-10-CDL or equivalent in Bajaj/ Havells/Philips.

All as in item No. 105 herein before but 5W. Make : Crompton Cat No. LDLL-5-CDL or equivalent in Bajaj/ Havells/Philips.

Supply and fixing ceiling fan 1200 mm sweep, 5 star rating (after assembling the same) with the fan hook/box including connecting with provision of flexible cord 3 core stranded copper conductor of size 0.50 sqmm from connector block to fan including connection to earthing point and fixing regulator all as specified and directed. Make : Havells Cat No. ES 40, white colour, 5 star or equivalent in Bajaj/ Crompton/Philips.

Supply and fix exhaust fan 300mm sweep with louvers, operated on 230/240V AC, 900 RPM single phase electric supply complete duly grouted bolts in wall fixed with nuts, bolts and washers including making suitable size hole hole in the existing wall, plastering, white washing or colour washing to the disturbed surfaces of wall complete matching with the existing including connecting with 3 core stranded copper conductor cable code of size 0.5 sqmm from ceiling rose to fan connector complete all as specified and directed. Make:- Havells Turbo Force SP or equivalent in Crompton / Bajaj

Supply and fix Mild steel, corrugated, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required of thickness 1.60mm complete including painting inside and outside with two coats of aluminium paint all as specified and as directed.

Supply and fix rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe 410-W with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including painting inside and outside with two coats of aluminium paint complete all as specified and directed.

Note : The amount against Schedule of Credit on Page No. 39 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

ChaudhariConstructions

M/S PRAMOD SURESHCHANDRA AHER

OM INFRA