Loading…
Loading…
Tender Value
₹41.0 Cr
EMD Value
₹82.0 L
Closing Date
8 Sept 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
CIVIL ENGG
30 conditions · 4 needing a document upload
10.2. Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tenderin crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractualturnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. In this reference, fourth previous year shall be considered only if bidder(s) give their consent in Annexure VIB as "previous year is yet to be prepared/ audited". The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported byAudited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy ofsuch certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip]
76 conditions · 4 needing a document upload
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons asmay be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
Manual tenders, supporting documents etc., sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED
All requisite documents are to be properly submitted online only and the bidders should ensure that the content of the documents uploaded is distinctly legible /readable. Non-readable documents will not be considered and will not be asked again after tender opening date.
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh. For tenders valuing more than Rs. 50.00 lakh: The offer of Tenderer(s) who do not enclose Experience Certificate & Turnover Certificate with requisite details, and supporting documents along with their Tender toestablish their credentials shall be summarily rejected, even though they are working contractors or contractors on approved list
The offer shall be evaluated only from the certificates/documents submitted along with the tender offer.
Any Certificate /Documents offered / submitted /received after the tender opening shall not be given any credit and shall not be considered.
Railway reserves the right to verify the authenticity of the documents/information furnished.
IRSGCC para 6.0 of part-I (a)(ii) Tenderers will examine the various provisions of The Central Goods and ServicesTax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. (a)(iii) The successful tenderer who is liable to be registered under CGST / IGST / UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/ UTGST /SGST Act to railway immediately after theaward of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority. (a)(iv) In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST fromhis/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. (b) When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf. (c) The Railway will not be bound by any powerof attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Increase/decrease of TAXES: if rates of existing GST or cess on GST for Works Contract is increased or any new tax /cess on Works Contract is imposed by Statute after the date of opening of tender but within the original date of completion/date of completion extended under clause 17 & 17A and the Contractorthereupon properly pays such taxes/cess, the Contractor shall be reimbursed the amount so paid. Further, if rates of existing GST or cess on GST for Works Contract is decreased or any tax/cess on Works Contract is decreased / removed by Statute after the date of opening of tender, the reduction in tax amount shall be recovered from Contractor's bills/Security Deposit or any other dues of Contractor with the Government of India
Fixed Deposit Receipts (FDRs) submitted after award of tender towards Security Deposit/Performance Guarantee should be with automatic renewal facility only.
Tenderer(s) shall note that conditional/alternate offer will not be considered and will summarily be rejected, even though such condition makes them as the lowest tenderer
Shramik kalyan While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged inconnection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at'www.shramikkalyan.indianrailways.gov.in' till ____Month,____Year
Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website.
A)An offer shall become invalid: - (i) if the Bid Security is not paid Online. (ii) if the offer is not digitally signed by the tenderer / by the Attorney / by the person authorized by the tenderer to sign and submit the tender on his/their behalf. (iii)if any individual/Proprietor / Partnership Firm / Company /JVFirm/HUF/Societyetc. uploads more than one offer either in his/their individual capacity or as a Proprietor or as a Partner/Member of Partnership Firm / JV Firm / HUF / Society etc. or as a Director of any Company, etc. B)An offer shall get summarily rejected if the following documents are not submitted /attached with offer as per the list mentioned in the tender documents: - (i) Documents as applicable in case of Proprietary concern/ Partnership firm / JV Firm / Company/HUF/Society/LLP Firm, etc. (ii) Annexure-V(A) linked under heading submission of Standard Format is to be submitted by the each member in case of a Partnership Firm /Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.,. (iii) Ballast test certificate, if applicable. (iv) Any other document required for evaluation of the bid. C)An offer shall get summarily rejected if the tenderer adds any condition on his/their own (anywhere in the e-offer),which is in violation of the Railway's Tender Conditions. D) An offer shall become ineligible for award of the tendered work if the tenderer does not fulfil the Eligibility Conditions, (both the Standard Financial Eligibility Criteria and the Standard Technical Eligibility Criteria) prescribed in the Tender Documents and bidcapacity if applicable.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN Rs. 10 CRORES, JOINT VENTURE (JV) FIRMS ARE ALSO CONSIDERED FOR ELIGIBILITY.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 10 CRORES: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI of IRSGCC April - 2022. NOTE: i)The Tenderer(s) shall furnish the details of existing commitments and balance amount of ongoing works withtenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started up to the of inviting of tender. In case of no works in hand, a 'NIL' statement should be furnished. This statement should be submitted duly verified byChartered Accountant.(ii) In case, the tenderer/s failed to submit the above statement along with offer, their/his offer shall be considered as incomplete and will be rejected summarily
Price Variation Clause (PVC) is applicable If the advertised tender value above Rs.2 Crores. (As per letter No. 2022/CEI/GT/GCC2022/Policy dated 14.07.2022) As detailed in - Para 46A of IRGCC April - 2022 attached to the tender in - DOCUMENTS. Base Month: The Base Month for 'Price Variation Clause' shall be taken as the one month prior to closing of tender, unless otherwise stated elsewhere. The quarter for applicability of PVC shall commence from the month followingthe Base month. The Price Variation shall be based on the average Price Index of the quarter under consideration. [with up to date correction slip/ Railway Board Letter].
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VIA and shall be valid for a period of 90days beyondthe bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i).A scanned copy of the Bank Guarantee shall be uploaded one Procurement Portal (IREPS) while applying to the tender.(ii).The original Bank Guarantee should be delivered to Chief Office Superintendent Rate before closing date for submission of bids i.e., excluding the last date of submission of bids. (ACS-5 dtd 20.10.2023). (iii)Non submission of scanned copy of Bank Guarantee with the bid on etendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv) The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v) The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii).If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
We fail to submit the requisite Performance Guarantee [P.G] in the prescribed format even after 60 (Sixty days) from the date of issue of Letter of Acceptance, we are aware that the contract liable to be terminated duly forfeiting Bid Security and other dues, if any payable against the contract.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 10 CRORES: Bid capacity is applicable, the tenderers should submit bid capacity as per proforma attached in tender DOCUMENTS. In case, the tenderer/s failed to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The work shall be maintained after completion for a period of 06 Months/1 Monsoon which ever is later by the contractor and he shall make good any defects, imperfection shrinkages or faults which may appear at his own cost.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are abiding by the General Conditions of Contract (GCC) April-2022 & any statutory modification thereof and also abide to carry out the work accordingly.
Tenderers are requested to visit the web site https//www.ireps.gov.in frequently till the closing date and time for any update.
Tenderer should have to upload only exact & specific, clear and readable documents, irrelevant documents should not be uploaded, and documents uploaded once should not be repeated
Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be only exempted from payment of Bid Security. Labor Cooperative Societies shall submit only 50% of above Bid Security.
As per official Gazette Notification from "The Institute of Chartered Accountants of India( ICAI) (Set up by an Act of Parliament) dated 02/08/2019,Unique Document Identification Number (UDIN) has been made mandatory from 1st July, 2019 for all Audit/Assurance/Attest function.(Official GazetteNotification attached below).'ICAI has conceptualised and implemented an innovative concept called Unique Document Identification Number (UDIN). ICAI at its 379th Council Meeting held on 17th - 18th December, 2018 made generation of UDIN mandatory for every signature of Full time Practising CharteredAccountants in phased manner for the following services: 1) All Certificates with effect from 1st February, 2019 2) GST and Income Tax Audit with effect from 1st April, 2019 3) All Audit and Assurance Functions with effect from 1st July, 2019 Therefore, UDIN is being made mandatory for all Audit and Assurance Functions like Documents and Reports certified / issued by full time Practising Chartered Accountants from 1st July, 2019'.Any document verified by CA but not having UDIN No. (Wherever applicable) shall not be considered.
(1) Pandharpur Amrit station soft upgradation work by developing circulating area, provision of COPs, cover shed, canopy and CC road, Entry/Exit gates, S&T & Electrical installations as per approved Master plan. (2) Development of Pandharpur Amrit station by construction of concourse, Gents & Ladies waiting rooms, toilets, station entry, booking office, S&T & Electrical installations as per approved Master plan. (3) Dharashiv - Development of circulating area, COP, cover shed for waiting area, Station entrance widening and entry gate, S&T & Electrical installations as per approved Master plan at Dharashiv. & (4) Latur- Development of Circulating area, COP, PF surfacing, Waiting room, Toilet, Parking and Relocation on of infringing structures in circulating area at Latur station.
03-2026-GSU-Civil~CR
03-2026-GSU-Civil
Open
Works - General
12 Months
Solapur, Maharashtra
₹0
₹82.0 L
18 Aug 2026
18 Aug 2026
25 Aug 2026
387 items across 4 schedules · ₹24,78,16,017.76 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 400 | 177.5 | 71,000 |
| 2 | Ordinary rock | cum | 200 | 498.9 | 99,780 |
| 3 | Hard rock (blasting prohibited) | cum | 200 | 1,432.95 | 2,86,590 |
| 4 | Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm | Metre | 15 | 549.75 | 8,246.25 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 150 | 196 | 29,400 |
| 6 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 398.73 | 8,340.85 | 33,25,747.12 |
| 7 | Each | 20 | 929.8 | 18,596 | |
| 8 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 200 | 392.15 | 78,430 |
| 9 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 200 | 842.5 | 1,68,500 |
| 10 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 100 | 927.25 | 92,725 |
| 11 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 100 | 736.4 | 73,640 |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 100 | 961.3 | 96,130 |
| 13 | Stairs, (excluding landings) except spiral- staircases | Sqm | 3 | 764.95 | 2,294.85 |
| 14 | Under 20 cm wide | Metre | 5 | 208.55 | 1,042.75 |
| 15 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 44607.64 | 107.85 | 48,10,933.97 |
| 16 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 5000 | 107.85 | 5,39,250 |
| 17 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 50 | 9,504.75 | 4,75,237.5 |
| 18 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 50 | 9,860.4 | 4,93,020 |
| 19 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 25 | 733.5 | 18,337.5 |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 7,132.25 | 3,56,612.5 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 9,105.95 | 4,55,297.5 |
| 22 | cum | 5 | 15,077.95 | 75,389.75 | |
| 23 | Area of slab upto 0.50 sqm | Sqm | 30 | 3,414.8 | 1,02,444 |
| 24 | Area of slab over 0.50 sqm | Sqm | 30 | 3,078.4 | 92,352 |
| 25 | Granite work | Metre | 25 | 510.95 | 12,773.75 |
| 26 | Metre | 10 | 568.55 | 5,685.5 | |
| 27 | Each | 10 | 978.7 | 9,787 | |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 100 | 1,267.95 | 1,26,795 |
| 29 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 50 | 3,167.95 | 1,58,397.5 |
| 30 | Fixed to steel windows by welding | Kg | 200 | 219.1 | 43,820 |
| 31 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 15 | 238.35 | 3,575.25 |
| 32 | With 12 mm mild steel U beading | Sqm | 25 | 939.2 | 23,480 |
| 33 | 250x10 mm | Each | 10 | 115.15 | 1,151.5 |
| 34 | 125 mm | Each | 30 | 119.2 | 3,576 |
| 35 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 6 | 117.35 | 704.1 |
| 36 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 107660 | 133.7 | 1,43,94,142 |
| 37 | Hot finished welded type tubes | Kg | 156129.47 | 194.4 | 3,03,51,568.97 |
| 38 | Providing and fixing bolts including nuts and washers complete. | Kg | 3030.35 | 159.35 | 4,82,886.27 |
| 39 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 2 | 172.6 | 345.2 |
| 40 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 5 | 772.4 | 3,862 |
| 41 | Dark shade pigment using ordinary cement | Sqm | 1000 | 1,119.5 | 11,19,500 |
| 42 | Size of Tile 600 x 1200 mm | Sqm | 100 | 1,577.15 | 1,57,715 |
| 43 | Size of Tile 600 x 600 mm | Sqm | 300 | 1,464.85 | 4,39,455 |
| 44 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 25 | 4,481.3 | 1,12,032.5 |
| 45 | 110 mm diameter | Metre | 50 | 377.4 | 18,870 |
| 46 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 500 | 738.65 | 3,69,325 |
| 47 | Ridges plain (500 - 600mm) | Metre | 100 | 532.35 | 53,235 |
| 48 | Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. | Sqm | 2000 | 1,570 | 31,40,000 |
| 49 | 1:4 (1 cement: 4 fine sand) | Sqm | 100 | 347.05 | 34,705 |
| 50 | 1:4 (1 cement: 4 fine sand) | Sqm | 200 | 399.45 | 79,890 |
| 51 | Neat cement punning. | Sqm | 200 | 79.95 | 15,990 |
| 52 | In two coats | Sqm | 25 | 1,175.75 | 29,393.75 |
| 53 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 500 | 262.7 | 1,31,350 |
| 54 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 1000 | 171.1 | 1,71,100 |
| 55 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 500 | 193.7 | 96,850 |
| 56 | Two or more coats on new work | Sqm | 1000 | 146.8 | 1,46,800 |
| 57 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 300 | 2,434.25 | 7,30,275 |
| 58 | In cement mortar | cum | 20 | 2,060.2 | 41,204 |
| 59 | In cement mortar | cum | 50 | 2,458.95 | 1,22,947.5 |
| 60 | Of area 3 sq. metres and below | Each | 10 | 367.2 | 3,672 |
| 61 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 1000 | 5.65 | 5,650 |
| 62 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 2 | 266.45 | 532.9 |
| 63 | G.S. Sheet | Sqm | 100 | 164.95 | 16,495 |
| 64 | Asbestos Cement sheet | Sqm | 4 | 77.3 | 309.2 |
| 65 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 2 | 54.65 | 109.3 |
| 66 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | Sqm | 2 | 56.35 | 112.7 |
| 67 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 50 | 263.95 | 13,197.5 |
| 68 | 90 mm to 45 mm size stone aggregate | cum | 50 | 2,098.4 | 1,04,920 |
| 69 | 63 mm to 45 mm size stone aggregate | cum | 5 | 1,636.05 | 8,180.25 |
| 70 | Moorum | cum | 280 | 768.25 | 2,15,110 |
| 71 | Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer | cum | 200 | 11,098.45 | 22,19,690 |
| 72 | With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 | cum | 150 | 2,924.85 | 4,38,727.5 |
| 73 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 1500 | 2,017.6 | 30,26,400 |
| 74 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 20 | 53.25 | 1,065 |
| 75 | 20 mm nominal dia Pipes | Metre | 50 | 537.6 | 26,880 |
| 76 | 80 mm dia nominal bore | Metre | 10 | 1,041.7 | 10,417 |
| 77 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 500 | 11 | 5,500 |
| 78 | 450 mm dia. R.C.C. pipe | Metre | 8 | 1,620.95 | 12,967.6 |
| 79 | 600 mm dia. R.C.C. pipe | Metre | 5 | 2,243.4 | 11,217 |
| 80 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 1 | 12,770.55 | 12,770.55 |
| 81 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 5 | 5,957.9 | 29,789.5 |
| 82 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 4 | 6,889.8 | 27,559.2 |
| 83 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 200 | 530.9 | 1,06,180 |
| 84 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 200 | 634.45 | 1,26,890 |
| 85 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 50 | 1,176.8 | 58,840 |
| 86 | Upto 5mm depth and 5 mm width | Metre | 100 | 96.75 | 9,675 |
| 87 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. | Sqm | 300 | 688.9 | 2,06,670 |
| 88 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | cum | 25 | 8,042.3 | 2,01,057.5 |
| 89 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. | Kg | 10 | 414.3 | 4,143 |
| Schedule total | ₹7,13,08,912.18 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-uptoACS10compressed.pdf
ATTACHMENT
AdvanceCorrectionslip11.pdf
ATTACHMENT
AdvanceCorrectionSlipNo12_compressed.pdf ACS 12
ATTACHMENT
BidcapacityFormate.pdf
ATTACHMENT
CECircularno190.pdf
ATTACHMENT
PCEcir208.pdf
ATTACHMENT
PCEcircular207.pdf
ATTACHMENT
PCSOSafetyCircular_compressed.pdf
ATTACHMENT
RevisedGSTcirculardtd.05.07.2022.pd.pdf
ATTACHMENT
Specialcondition.pdf
ATTACHMENT
Scopeofwork.pdf
ATTACHMENT
AdvanceCorrectionSlipNo12_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].