Construction of Solarized Toilet Blocks containing 3 Units of WC and Bath with Common Laundry Place at Police Post Khaltsi.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 1 Osqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil

Dumping of Stone including cost of stone and carriage complete job.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)(Crushed) including cost of material and carriage complete job.

Random Rubble masonry with hard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) including carriage complete job.

Providing and laying damp-proof course 50 rnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4graded stone aggregate 20mm nominal size including carriage complete job.

Providing and Constructing cement stabilized mud block masonary (mud block made of soil containing 60% to 70% of sand and 10% of clay and 5% of cement pressed using manual machine) in cement mortar 1:4 in walls.The size of the block is 305x143x100 mm .Laid in course cement mortar as per the direction of Engineer in_charge.Outer wall only. complete job.

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed.including carriage complete job.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,including cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate20 mm nominal size) including cost of material and carriage complete job

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.(Including Carriage complete job)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).2nd class Kail wood.complete job.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.2nd class Kail wood 35mm.complete job.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle Board 12mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type IllS: 12823 marked .complete job.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm(4 mm thick) float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.2nd class Kail wood 35mm. complete job

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250 x 16

Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screwsetc complete. 150 x 10

Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 125 mm

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) including cost of material and carriage complete job

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and inluding priming coat with cement primer

Rough cast plaster upto 1Om height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 1 Omm nominal size dashed over and including the fresh plaster in two layers,under layer 12 mm cement plaster 1:4 (1 cement 4 coarse sand) and top layer 10 mm cement plaster 1:3(1 cement:3 fine sand)mixed with 10% finely grounded hydrated lime by volume of cement.(Ordinary Cement finish using ordinary cement) including carriage complete job.

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 minimu thickness 5mm of approved make, likeNITCO,ORIENT,SOMNAY, KAJARIA or equivalent make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Including carriage complete job)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO, ORIENT SOMNAY KAJARIA or equivalent approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.(including carriage complete job.)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. Crushed.including cost of material and carriage complete job.

Providing and fixing glass strips in joints of terrazo I cement concrete floor. 40 mm wide and 4 mm thick

Thermal Insulation in wall with expanded polystyrene fixed with suitable adhesive to the outer wall as per the direction of the Engineer-in-charge.with Type N-Normal 50 mm thick complete job.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Puff Insulated for Sintex as per direction of Engineer in charge.complete job.1000ltr

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and bra<?kets, cutting and making good the wafls and floors wherever required: One urinal basin with 5 litre P.V.C white automatic flushing cistern of approved quality.

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing brass bib cock of approved qua1ity. 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality.20 mm nominal bore

Providing and fixing un plasticized PVC connection pipe with brass unions 45 cm length 20 mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer & gyser point of approved make conforming to IS:8931. 15 mm nominal bore.

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes havmg thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this included jointing of pipe and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. (External work) complete job. 75mm nominal inner dia pipes.

100 mm nominal inner dia pipes.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) complet job.Pn-16 pipe, 25mm 0D

Pn-16 pipe , 32mm 00

M/S NAWANG CHOSGIAL

M/S MURUP GYALTSON