REPAIR/MAINTENANCE OF STREET LIGHT, PERIMETER SECURITY LIGHT, HIGH MAST LIGHT AND ITS CONNECTED ITEMS AT ZONE B OF JALIPA MIL STN UNDER GE (A) BARMER

Amount

Disconnecting and taking down old unserviceable 70/80/125/150 watt SV / MH / MV lamp street light fittings with brackets fixed on HT/LT poles, repairing after cleaning and replacing the un-serviceable parts like Ballast / choke, starters, ignitors, capacitors, holders, lamp etc and refixing / reconnecting after replacing wires / jumpers as required for proper functioning of street light fittings complete all as specified and as directed . Note : - (i) Parts replaced like ballasts / chokes, starters, ignitors, capacitors, holders, lamps, etc shall be measured and paid for as "Supply only" here-in-after. (ii) Cost of replacement of wornout wire/jumpers of the fittings and connections as per existing size of conductor of the each fittings shall deemed to be included in the rate quoted of this item.

Supply only electronic Ignitor suitable for HPMV/ HPSV /MH fitting of 70/80/125/150 watt

Supply only copper ballast/choke with copper winding for street light fitting of HPSV/MH 150 watt.

Supply only MH tubular lamp for street light fitting of 150 watt.

Supply only lamp holder assembly as per existing make suitable for HPSV/MH fitting up to 150 watt

Disconnecting and taking down old unserviceable LED street light fittings with brackets fixed on HT/LT/Street light poles for inspecting/repairing after cleaning and replacing the un-serviceable parts and refixing / reconnecting after replacing wires / jumpers as required for proper functioning of street light fittings complete all as specified and as directed . Note : -(i) Parts replaced shall be measured and paid for as "Supply & Fix" under appropriate items here-in-after and hence the labour element for fixing of these items shall not be included in rate quoted for this item. (ii) Cost of replacement of wornout wire/jumpers of the fittings and connections as per existing size of conductor of the each fittings shall deemed to be included in the rate quoted of this item.

Supply & Fix Driver for LED 25 Watt Make :- Bajaj / Havells / CROMPTON

Supply & Fix Driver for LED 45 Watt Make :- Bajaj / Havells / CROMPTON

Supply & Fix Driver for LED 60 Watt Make :- Bajaj / Havells / CROMPTON

Supply & Fix surge protector for LED 25 to 90 Watt Make :- Bajaj / Havells / CROMPTON

Disconnecting and taking down LED integrated solar light of make Axxon tech of capacity 12 W to 24W street light fittings with brackets fixed on HT/LT poles, repairing after cleaning and replacing the un-serviceable parts like solar charge controller, sensor, Lithium battery etc., and refixing / reconnecting after replacing wires as required for proper functioning of street light fittings complete all as specified and as directed . Note : - (i) Parts replaced like solar charge controller, sensor, Lithium battery etc .,shall be measured and paid for as "Supply only" here-in-after. (ii) Cost of replacement of wornout wire of the fittings and connections as per existing size of conductor of the each fittings shall deemed to be included in the rate quoted of this item.

Supply only solar charge controller 5 Amp for 12 W to 16 W for integrated solar street light Make :- Axxon -12WSCC or techno commercially equivalent in Philips / C&S

Supply only solar charge controller 10 Amp for 24 W for integrated solar street light Make :- Axxon -24WSCC or techno commercially equivalent in Philips / C&S

Supply only PIR motion sensor for 170uA for solar street light 12 W to 24 W Make :- Axxon / Philips / C&S

Supply only lithium Ion Battery 11.1V/15.4 AH ( 210mmX70X40mm) for 12W Make :- Axxon / Philips / C&S

Supply only lithium Ion Battery 11.1V/19.8 AH ( 210mmX70X40mm) for 16W Make :- Axxon / Philips / C&S

Supply only lithium Ion Battery 11.1V/ 28.6 AH ( 210mmX70X40mm) for 24W Make :- Axxon / Philips / C&S

Supply, fix ,connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-66 protection of street light luminaries 40 watt , impact resistance, fixed on pole including taking down unserviceable light fitting complete all as specified and as directed . Make : CG Cat Part No. LSTP - 40 - CDL or techno commercially equivalent model of make Bajaj/Philips/Havells

Supply, fix ,connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-66 protection of street light luminaries 45 watt , impact resistance, fixed on pole including taking down unserviceable light fitting complete all as specified and as directed . Make : CG Cat Part No. LSTP - 45- CDL or techno commercially equivalent model of make Bajaj/Philips/Havells

Supply, fix ,connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-66 protection of street light luminaries 60 watt , impact resistance, fixed on pole including taking down unserviceable light fitting complete all as specified and as directed . Make : CG Cat Part No. LSTP - 60 - CDL or techno commercially equivalent model of make Bajaj/Philips/Havells

S&F Integral compact wide beam LED flood light luminiaire with die cast aluminium alloy housing with IP 65 protection, tampered protective toughened glass 5mm thick, thermal shock impact resistant cover, epoxy black powder coated finish, high purity pre-anodised specular aluminium sheet reflector, with silver painted contacts suitable for 1x100 Watts LED and connection with two runs of 2.5 Sqmm multi-stranded, copper flexible wire including taking down old unserviceable one and testing complete as specified and as directed by the Engineer-in-Charge. Make : Cat No Havells Cat Part No. LHEPCZU7PA6J100 or techno commercially equivalent model of make Bajaj/Philips/CROMPTON

Supply, fix ,connecting and testing of Lithium base Energy Efficient integrated solar street light 16 watt in FRP body encases solar PV panel 30/35W monocrystalline,lithium battery 11.1/12.8V,19.8 AH with built-in BMS, High brightness W-LED(120-160 Lm/Watt) lamp,CRI 80,color temperature 6500K, Micro controller based charge controller cum driver with automatic dimming function,dusk to down operation,LUX output 30-35 (from 5-6 mtr height),working temperature (-)10°c to (+)55°c,weight 8-9 Kg with adjustable MS clamp suitable for pole/wall mounting protection from short circuit, overload,reverse polarity and battery protections including taking down unserviceable light fitting complete all as specified and as directed. Make : Axxon - AXN - 16 watt or techno commercially equivalent model of make Bajaj/Philips/CROMPTON

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5 mtr in deep for foundation of pole, laying of cable etc, and getting out in any type of soil complete all as specified and as directed .

Removing excavated materials to a distance not exceeding 50m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and as directed.

Supply and spreading tibba sand in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

Supply and laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and not less than 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and as directed.

Material & labour for Plain cement concrete 1:3:6 type C-1by using 20mm graded crushed stone aggregate as in padestal coping of pole including necessary form work complete including rubbis off the premise of old broken/fallen padestal coping all as specified and as directed.

Taking out existing LT under ground cable 1100 volts grade PVC insulated PVC Sheathed armoured aluminium conductor of any size from trenches / ducts / pipe, on wall, poles and removing unserviceable cable from the site complete all as specified and directed .

Supply and lay cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core for connecting of main switch unit for street light including clamping accessories wherever required complete all as specified and as directed. Note :- Cable shall be drawn through existing GI (Cable protection) pipe where required.

Supply and lay cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core for connecting of main switch unit for street light including clamping accessories wherever required complete all as specified and as directed. Note :- Cable shall be drawn through existing GI (Cable protection) pipe where required.

Supply and lay cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 4 core for connecting of main switch unit for street light including clamping accessories wherever required complete all as specified and as directed. Note :- Cable shall be drawn through existing GI (Cable protection) pipe where required.

Repairs to High Mast light fittings of 60 to 100 watt,230/240 volts of any make, including taking down existing fittings from pole (16 Mtr high) and refixing the same in same position by using crane/hydraulic hoisting machinary/vehicle as required at site after replacement of unserviceable/defective parts of the fittings as required to make the fittings functional/serviceable condition and testing complete all as specified and as directed. Note :- Parts replaced shall be measured and paid for as "Supply & Fix" under appropriate items here-in-before vide item No 11 & 12 and hence the labour element for fixing of these items shall not be included in rate quoted for this item.

M/S JOGARAM SUJARAM JASSAI

m/s sai construction company,bijarar

KRISHNA CONSTRUCTION COMPANY