Works Contract for East Gandhi Nagar Section.

Amount

Excavation of pole pit for pole upto 8.00m length by using JCB/Manual

Erection of RCC, REC, PSC poles upto 8.00m length by using Crane /Manual

Excavation of pole pit for pole above 8.00m length by using JCB/Manual

Erection of RCC, REC, PSC poles above 8.00m length by using Crane /Manual

Fixing of LT3 phase cross arm

Fixing of LT PIN insulator

Fixing of Guarding X-Arm

Fixing of Shackle

Excavation of Stay pit of 4.5 ' to 5 ' depth using JCB / Manual

Erection of stay set complete with fixing up stay wire Eye, Bow, GuyShackle, Binding etc.

Fixing of Alu Knob

Concreting with 1:4:8 mixusing 40 mm Jelly including curing(Material +labour) (i) Mass concreting of poles

(i) Earthing of poles with GIwires 4 or 6 SWGby coil earthing

Dismantling of conductor of upto 7/3.35 including transporting the conductors to the nearest road side and stocking in coils

Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit

Loading and Unloading of various sizes of poles (i) REC, RCC, PSC poleupto 8.00 m length from Road to Work Site

Loading and Unloading of various sizes of poles (ii) REC, RCC, PSC pole above 8.00 m Length Road to Work Site

Loading / Unloading of line materials

Transportation of all type of poles by bullock cart or other vehicle (forall sizes of poles) (i) For a lead upto 5 KM

Transportation of all type of poles by bullock cart or other vehicle (forall sizes of poles) (ii) Above 5KM (10X75=750)

Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR orother equivalent conductor

Fixing of HT/LT TI Fitting

Transporting of conductors of all sizes from road side to pit locationsupto one KM of Conductor

(i) Transporting of Line materials from stores to office / site upto 10 KM distance by engaging 1 Ton capacity Minidor (Lorry)

Dismantling of Cross arm clamps TI fitting hardwares, insulators etc.,

Paving and stringing of conductors of sizes above 7/2.59 mm ACSRupto 7/3.35 mm or other equivalent conductor

Fixing of 11 KV V X-Arm

Fixing of HT strain disc 11 KV

Fixing of HT PIN insulator with Pin 11 KV

Fixing of Tapping X-Arm

Loading or unloading of Distribution Transformer (i) upto 100 KVA

Dismantling of stay set complete (ii) without stay rod

Dismantling of conductor of above 7/3.35 including transporting theconductors to the nearest road side and stocking in coils

Erection of 11 KV single pole Structure including erection of DTcomplete without centre support

Fixing of LT Single Phase Cross Arm

Paving of conductors of 7/4.09 mm ACSR or other equivalent conductor

Erection of New DT (i) Above 25 KVA to upto 100 KVA

G.S.T. @18% should be Entered by the Bidder