8834/E8 REPAIR / REPLACEMENT OF EXTERNAL WATER SUPPLY PIPELINE AT NAD SUNABEDA, ODISHA

Amount

M&L fo aresting leaking of run lead joints for 300mm dia of CI/MS socket & Pigot pipes by caulking/burning out lead complete all as directed by by Engineer -in-charge.

M&L fo aresting leaking of run lead joints for 200mm dia of CI/MS socket & Pigot pipes by caulking/burning out lead complete all as directed by by Engineer -in-charge.

M&L fo aresting leaking of run lead joints for 150mm dia of CI/MS socket & Pigot pipes by caulking/burning out lead complete all as directed by by Engineer -in-charge.

Servicing of sluice valve of 80mm dia including replacemnt of gland packing, spindle chuck nuts & bolts washers etc complete all as specified and directed.

All as per item No 04 above but 100 mm dia

All as per item No 04 above but 150 mm dia

All as per item No 04 above but 200 mm dia

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe line and the like, getting out in soft/ loose soil, complete all as specified.

Returning, filling in including spreading levelling, watering and well ramming in layers n.exc. 25cm in soil, complete all as specified.

Removing excavated surplus soil material to a distance not exceeding 50 mtr and deposited at a level not exceeding 1.5 mtr above from the starting point, complete all as specified.

M&L for water tubing 100mm bore, galvanised iron, medium grade, ISI Marked, laid in trenches and the like with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps plugs and unions etc., including taking down old pipe in any position, complete all as specified. Make: JINDAL / PRAKASH / ZENITH

Description all as above item No 11 but for 80mm bore.

Description all as above item No 11 but for 50mm bore.

M&L for Steel water tubing 50mm bore, medium grade, galvanized, ISI marked with all fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing old pieces, caps, plugs and unions etc., laid in floors, along wall and on ceiling including taking up or down steel tubing with connections or fittings, complete all as specified. Make: JINDAL /PRAKASH / ZENITH

Description all as per Serial Item No. 14 but for 40mm bore.

Description all as per Serial Item No. 14 but for 25mm bore.

Description all as above item No 14 but for 40mm bore.

Description all as above item No 14 but for 20mm bore.

Taking up old cast iron water mains (including all fittings), with spigot and socket ends, Supply, laying connecting and testing of new Ductile Iron pipe 300mm bore with spigot & socket ends centrifugally cast of class LA, laid in trench and the like with all fittings such as bends, elbows, tees, short pieces, connectors etc. complete all as specified. Make: JINDAL /PRAKASH / ZENITH/TATA

Description all as above item No 19 but for 200mm bore.

Description all as above item No 19 but for 150mm bore.

Description all as above item No 19 but for 100mm bore.

Description all as above item No 19 but for 80mm bore.

S&F in repair Sluice valve 200mm dia, cast iron body, PN-1.6, with flanged ends drilled at both ends, ISI marked, having brass spindle with iron wheel at top, with nuts, bolts , washers, rubber gasket etc, complete all as specified. Make: Kirloskar / L&T / Upadhyay / Leader

S&F in repair Sluice valve 150mm dia, cast iron body, PN-1.6, with flanged ends drilled at both ends, , ISI marked, having brass spindle with iron wheel at top, with nuts, bolts , washers, rubber gasket etc, complete all as specified. Make: Kirloskar / L&T / Upadhyay / Leader

S&F in repair Sluice valve 100mm dia, cast iron body, PN-1.6, with flanged ends drilled at both ends, ISI marked, having brass spindle with iron wheel at top, with nuts, bolts , washers, rubber gasket etc, complete all as specified. Make: Kirloskar / L&T / Upadhyay / Leader

S&F in repair Sluice valve 80mm dia, cast iron body, PN-1.6, with flanged ends drilled at both ends, ISI marked, having brass spindle with iron wheel at top, with nuts, bolts , washers, rubber gasket etc, complete all as specified. Make: Kirloskar / L&T / Upadhyay / Leader

M&L in repair for Gun metal globe or gate valves (Class-I) with iron wheel head, scrwed both ends, including GI Nipple & unions for iron pipe of 50mm dia, fixed as in repair, complete all as specified and directed for the following sizes:- Make: VARUN / LEADER / L&T / UPADHYAY/ ZOLOTTO

Description all as above item No 28 but for 40mm dia.

Description all as above item No 28 but for 25mm dia.

Description all as above item No 28 but for 20mm dia.

S&F in 80mm Non return sluice valve cast steel type PN-16 both end flaged type with necessary nuts, bolts and washers complete all as specified and directed.

All as per item No.32 above but 100 mm dia

S&F in prepairs pressure gauge (0-14 kg/Cm2) including necessary spcials and provison of suitable ferrule etc complete all as specified and directed.

Material and labour for overhauling of pump set 50HP capacity, by dismantling completely with and including replacing unserviceable ball bearing, shaft sleeve, gland, neck ring gland rope sheld, unserviceable Nut bolt, washer etc. assembling back the complete pump and fixing alignment to the original position and coupling with pump, complete all as specified.

Material and labour for overhauling of pump set 40HP capacity, by dismantling completely with and including replacing unserviceable ball bearing, shaft sleeve, gland, neck ring gland rope sheld, unserviceable Nut bolt, washer etc. assembling back the complete pump and fixing alignment to the original position and coupling with pump, complete all as specified.

Material and labour for overhauling of pump set 30HP capacity, by dismantling completely with and including replacing unserviceable ball bearing, shaft sleeve, gland, neck ring gland rope sheld, unserviceable Nut bolt, washer etc. assembling back the complete pump and fixing alignment to the original position and coupling with pump, complete all as specified.

Taking down the defective pump set of capacity 50HP, by disconnecting connections, removing the motor from bed, transporting to workshop, dismantling the burnt out winding from rotor/ stator and rewinding the rotor or stator with same type super enameled copper wire of same gauge and with necessary insulating material, varnishing, backing, re-assembling the motor completely transporting back to site and alignment with the same with connections including testing and commissioning all as specified directed. Notes : i) Burnt out removed winding wire shall be property of contractor through schedule of credit. ii) Bearings shall be measured and paid separately.

Description all as per Serial Item No.38 here in before but for 40HP pumpset.

Description all as per Serial Item No.38 here in before but for 30 HP pumpset.

S&F in repair ball bearing suitable for 50HP induction motor, 3 phase, complete all as specified.Make: ZKL / NBC / SKF

S&F in repair ball bearing suitable for 40HP induction motor, 3 phase, complete all as specified.Make: ZKL / NBC / SKF

S&F in repair ball bearing suitable for 30HP induction motor, 3 phase, complete all as specified. Make: ZKL / NBC / SKF

Demolation of old unservicable/broken chamber and M&L for construction of brick masonry valve chamber (750 x 750 x 750) mm size with plain cement concrete in 1: 5:10 type 02 foundation and 15mm thick plaster in CM 1:4 on brick wall inside and rick chamber bult in cement mortor 1:6 including of MS Sheet cover 3mm thick with angle iron (40x40x40) brackets grouted to brick wall duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with lifting handle and locking arrangement complete all as specified.

S&F in repair 200mm dia cast iron foot valve Flanged type, as per IS-4038 PN-1.6 having sheet gunmetal disc face ring-Nitrale rubber, Hinge pin stainless steel AISI-410 with cast iron boltd stainer with necessary nut, bolt washers etc, complete including taking out old valves complete all as specified and directed

S&F in repair 150mm dia cast iron foot valve Flanged type, as per IS-4038 PN-1.6 having sheet gunmetal disc face ring-Nitrale rubber, Hinge pin stainless steel AISI-410 with cast iron boltd stainer with necessary nut, bolt washers etc, complete including taking out old valves complete all as specified and directed

S&F in repair 100mm dia cast iron foot valve Flanged type, as per IS-4038 PN-1.6 having sheet gunmetal disc face ring-Nitrale rubber, Hinge pin stainless steel AISI-410 with cast iron boltd stainer with necessary nut, bolt washers etc, complete including taking out old valves complete all as specified and directed

S&F in repair 80mm dia cast iron butter fly valve with necessary nut, bolt washers etc, complete including taking out old valves complete all as specified and directed

Material and labour for foundation of pump set 50HP capacity, by dismantling completely with and including replacing , steel structure. Exacavation, unserviceable Nut bolt, washer etc. assembling back the complete pump and fixing alignment to the original position and coupling with pump, complete all as specified.

Material and labour for foundation of pump set 40 HP capacity, by dismantling completely with and including replacing , steel structure. Exacavation, unserviceable Nut bolt, washer etc. assembling back the complete pump and fixing alignment to the original position and coupling with pump, complete all as specified.

SMART ENERGY SOLUTIONS

SHIKHARA PROJECTS

M/S SANTOSH SATAPATHY

Mahalaxmi Traders