NIT 22E SL 02 Solar Street Light 06 Nos

Module-100WP (ERT Land Flash Tested) I.The PV module shall contain crystal line silicon solar cell sand must have a certificate of testing conforming to IEC61215 Edition. II.The power output to the module(s) under STC would be a minimum of 75Wp at a load more than 20% at the end of 25years. VII.The solar module shall be able to with stand the following environmental conditions normally encounter end at site – Temp. extreme ranging from-100C to + 850C Wind load –150km/h Maximum mean hourly rainfall of 40mm Humidity level up to 95%, VIII. Strip must contain the following details a) Name of Manufacturer b) Model or type number voltage*of 18.83±0.2V III.The open circuit voltage* of the PV module sunder STC would be 22.0 Volts IV. The module efficiency would be 15% (HR/ /Vikram/Any MNRE)

18 wt. LED -White light Emitting Diode(W-LED) 15Watt (LED+Driver) Colour temperature of White LED use din the system should be in the range of 5500k-6500k-Lumen efficiancy of LED min 130 Lumens/ Watt 18 Watt LiFe Po 4 Battery Minimum12. (Havells/ Transrail/ Innolta/ Rgoria)

LiFe Po 4 Battery Minimum12 .8v24Ah LiFe Po 4Battery at STC (Exide/ Amron)

In built Charge Control Unit sand other Electrinics supporting to Dimming facitiites after 5hrs & after 5 hrs 50% lighting, Dusk to Dawn facitlities PWM/MPPT type- Maximum Power Point Tracking, Charge controller Rating @ Related Voltage minimum 8amp, Average Duty Cysle-Dusk to Dawn. (Reputed Make like/ TBEI)

GI.Pole Approx 4.5meter Above the Ground, Mounted at Pole or Below Mounting Structure. I) Acorrosion resistant metallic frame structure must be fixed on the pole to hold the SPV moduleII. II) The frame structure must have provision to adjustits angle of inclination to the horizontal between 0 and 45, so that the module can be oriented at the specified tilt angle. III). Pole height: Swedge 2PART 5Mtr. (Dia = 73mm X 61mm) With grounding facility Corrosion. (ISI Mark/ Reputed Make)

Cable & Lugs 2C 2.5 Sq.mm for battery charging & 2C 1.5Sq.mm for load and others & Lugs as per requirement Cost of Material. (ISI Brand)

Installation and Commissoning Standard.

Civil Work - The pole should be grouted with CC mixture of 1:2:4 of dia 300mm having depth of 700mm and 300mm above ground level with 300mm dia 9 Transportation at Site On Road. (Standard)

Display Board Standard …..

Transportaion at work site …

1st year maintanance cost -

2nd year maintanance cost -

3rd year maintanance cost -