Restoration of damaged direct outlet at RD.119.200 km right side of Kandi canal stage -2

Amount

(2) Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Earth work upto 1.5 m. Depth for

All classes of soil except rocky

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

C.I Single air valve screwed (Size 50mm)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge

Capacity of Air compressor 300 cfm at 250 PSI

BRICK WORK First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING 12.5 mm thick cement plaster 1:4

Cement rendering on plaster 1mm thick

CONCRETE Cement concrete 1:2:4mixing by mechanical means using concrete mixer volumetric type

STEEL AND IRON WORKCold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

providing laying , fixing & jointing of UPVC socketed type pipe as per ISI-4985 (ISI marked with the prior approval of engg.in.charg. )along the trenches & laying the same in trench to correct alignment & gradient,cutting ,jointing& testing complete as per specification pipe 2.5 kg /sqcm 160mm dia

providing laying , fixing & jointing of UPVC socketed type pipe as per ISI-4985 (ISI marked with the prior approval of engg.in.charg.)along the trenches & laying the same in trench to correct alignment & gradient,cutting ,jointing& testing complete as per specification pipe 2.5 kg /sqcm 180mm

providing laying , fixing & jointing of UPVC socketed typepipe as per ISI-4985 (ISI marked with the prior approval of engg.in.charg. )along the trenches & laying the same in trench to correct alignment & gradient,cutting ,jointing& testing complete as per specification pipe 2.5 kg /sqcm 200mm

providing laying , fixing & jointing of UPVC socketed type pipe as per ISI-4985 (ISI marked with the prior approval of engg.in.charg. )along the trenches & laying the same in trench to correct alignment & gradient,cutting ,jointing& testing complete as per specification pipe 2.5 kg /sqcm 250mm

providing laying , fixing & jointing of UPVC socketed type pipe as per ISI-4985 (ISI marked with the prior approval of engg.in.charg. )along the trenches & laying the same in trench to correct alignment & gradient,cutting ,jointing& testing complete as per specification pipe 2.5 kg /sqcm 315mm

providing &fixing ISI marked Alfa valve 160mm

Providing & fixing ISI Marked Alfa valve 180mm

Providing & fixing ISI Marked Alfa valve 200mm

Providing & fixing upvc Bend (6kg/sqm pressure )conforming to IS codes with latest amendment if any at sint of work including loading,unloading if any complete in all respects as per design & P.W.D specification & instruction of engg.in charge. 160mm

Providing & fixing upvc Bend (6kg/sqm pressure ) conforming to IS codes with latest amendment if any at sint of work including loading,unloading if any complete in all respects as per design & P.W.D specification & instruction of engg.in charge. 180mm

Providing & fixing upvc Bend (6kg/sqm pressure ) conforming to IS codes with latest amendment if any at sint of work including loading,unloading if any complete in all respects as per design & P.W.D specification & instruction of engg.in charge. 200mm

any other item

Deepak Kumar Beetan