REPAIR TO SEWAGE LINE MANHOLES CLEANING OF SEWAGE LINE AND SEPTIC TANK AREA DRAINAGE COMPOUND WALL GATE FENCING FLOORING PATH HARD STANDING AND MISC WORK AT MUDFORT AREA UNDER AGE B/R (S) NO II OF GE(SOUTH) SECUNDERABAD

Amount

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in anytype of soil.

Excavation in trenches n.exc. 1.5 m wide and exc. 1.5 m and not exceeding 3.00mm in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in anytype of soil.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick.

Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Demolition and breaking up drain pipes(salt glazed ware,AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 100mm dia pipe.

All as per Sl item No 5 above but 150 mm dia pipe.

All as per Sl item No 5 above but 200 mm dia pipe.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for (using 40mm graded stone aggregate)100mm dia pipe complete all as specified and directed

All as per item no 8 above but 150mm dia drain pipe

All as per item no 8 above but 200 mm dia drain pipe

M&L for SWG drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed

All as per Sl item no 11 above but 150mm dia.

All as per item no 11 above but 200mm dia.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm dia SWG pipe complete all as specified and directed

All as per Sl item No 14 above but 150mm dia.

All as per Sl item No 14 above but 200 mm dia.

All as per Sl item No 14 above but for removing existing branch drain, making good to walling and rendering, cutting out branch chromel and making good benchings for 150 mm dia SWG pipe.

All as per Sl item No 14 above but for removing existing branch drain, making good to walling and rendering, cutting out branch channel and making good benchings for 200 mm dia SWG pipe.

M&L for (two persons) Cleaning of all blockage of any type of sewage line ie branch sewer line, main sewer line etc, manholes of any section and depth, any situation by way of cleaning/disludging manholes by using any type of manually,mechanically or by way of any other suitable means including foreign materials as well as rodding of sewer lines and between successive from block manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional cleaning trap,water closet,soil waste/vent pipe,gully traps upto final drop out let into septic tanks or central sewage system treatmenting in other adjoining Zone/Area of into sewage well (working in foul condition with taking precautionary measures) equipment as required or applicable all as specified and directed. manholes of any size and depth and removing the sludge/material and depositing outside the MOD land complete all as directed .

Mechanically pumping out sewage water from Septic tanks/sump well where required and as directed with taking precautionary measurer including tools & plants as required and removing to place out side MD land from the site complete(working in foul condition) all as specified and directed.

Cleaning and de-sludging of existing septic tanks/ deep manholes up to 3 metre deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete(working in foul condition) all as specified and directed.

Description All as per item no 20 above but 3 to 6 mtr deep

Demolition and beaking up drain CI pipe/AC pipes/ PVC Pipe set in cement mortar 100 mm and below

S&F sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to wals bore of pipe 100mm dia .

S&F sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls bore of pipe 75mm dia.

S&F CI bends diminishing pieces or tapers bore of pipe 100mm dia

S&F CI bends diminishing pieces or tapers bore of pipe 75mm dia

S&F CI bends diminishing pieces or tapers bore of pipe 100mm with oval access door .

S&F CI bends diminishing pieces or tapers bore of pipe 75mm with oval access door.

S&F CI branch pieces, single (equator unequal) ordinary or inverted (size or socket type) or with parallel branches with oval access door bore of pipe 100mm.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm dia

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm dia

S&F PVC(SWR) bends 110 mm dia.

S&F PVC(SWR) bends 75 mm dia.with access door.

S&F PVC(SWR) bends 110 mm dia. With access door

S&F PVC(SWR) junction double,(Single T),equal or unequal. 110 mm dia .

S&F PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm dia complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for PVC (SWR) gully trap of I25/110 mm dia set and jointing wilh solvent cement complete all as specified and directed.

Demolition of re-inforced cement concrete of any description and in any position not otherwise provided for including removing the same where directed complete all as specified & directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4). Note:- reinforcement will be measured and paid seperatel

S/F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as specified and directed.

M/L reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates in sokage cover slabs complete all as specified and directed.

Demolition of brick work/stone work built in cement mortar including coping all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash brick straight or curve on plan exc 6m mean radius built in cm 1:6 using old size bricks as in walls etc.

M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, including necessary form work weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F broken glass coping on top of walls in CM 1:3 and taking off and removing rubbish complete all as specified and directed

Demolition of cement concrete in ground floor and paving n.exc 15cm thick below or above ground level complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, surfaces finished even and smooth by using extra cement complete all as specified and directed.

Supply and laying 38 mm wide & 3 mm thick glass dividing strips complete all as specified and directed

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings all as specified and directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debris

M/L 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth complete all as specified and directed.

M/L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and directed.

Preparation of new palster surface of wall and applying three coats of white wash complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

Supply only intergral water proofing compound

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground complete all as specified and directed .

S/F mild steel as in post in fencing post/struts including cutting top to shapes, drilling holes notching for wires etc. Fe - 290. Gde E-165 complete all as specified and directed.

Excavation in post holes or (similar holes) each n exc 0.50 Cum in soft/loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm thick watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Dismantling structural steel work incl doors gates in any position all directed

S/F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0 complete all as specified and directed.

S & F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes unched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc a required

M/L preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed.

Dismantling fencing wire mesh, any type and in any position all directed

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Taking down shutters of any description not exc 1.5 sqm sqm but n. exc 4 sqm and refixing in same opeining.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 as specified and directed

M & L Glazed ceramic coloured tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over including 10mm thick screed in cm 1:3 on wall , complete all as directed and as specified by Engineer-in-charge.

M&L for 75 mm thick PCC 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300mmx300mmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block With Grey cement and pigment of any shape, size and colour confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade all as specified and directed

M&L Sand filling under floors or in foundations including watering and consolidation

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, Low level, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat,closed patternwith flat bottom, with & M S CP or aluminium hinging device, complete.

S & F in repairs water closet (squatting pan) complete incl provison of lime concrete bedding ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including flushing cistern and flush pipe, PVC connection of size 450mm stop valve 15mm PTMT any colour high pressure screwed for iron pipe(min wt 15mm-110gms) including 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, inlet ball valve, float and handle including brackets and connection to pipe or lever etc.

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

S.R.M.K Enterprises

VENKATA PRABHAVATHI CONSTRUCTIONS

M/S B.SHRAVAN KUMAR

MAHALAKSHMI INFRA PROJECTS