REPAIR/MAINT OF SWIMMING POOL EQUIPMENT (CENTRIFUGAL PUMP/DOSING PUMP/FILTERATION PLANT), LT PANELS AND REPLENISHING CHEMICALS WITH ALLIED WORKS AT AYODHYA CANTT

Amount

Cleaning of Stn Swimming Pool of size 25 m x 15 m before operation using Eco friendly harmless to human beings cleaning material and suitable methods to make the pool water crystal clear bottom of the pool and transperant water all the time before filling as required at site complete all as specified and as directed. (Note : Quoted rates shall be included for providing manpower and cleaning material,safety gears and ladders etc required at site for filling up the swimming pools with water.)

Cleaning of Stn Swimming Pool of size 25 m x 15 m after completion of operation including complete drain out of pool with the help of required capacity Submersible monoblock P/set and Dry with using cotton cloth as well as complete drain out of filtertion plant and make the plant room neat & clean complete all as specified and directed by Engr-In-charge. (Note : Quoted rates shall be included for providing manpower and required cleaning material,safety gears and ladders etc required at site for drain out the swimming pools de-watering on completion of Operation and Maintenance of swimming pools)

(a) Cleaning of main pipe line from deep pool to balancing tank with pressure water and flushing out the all deposited and setteled impurities , through balance tank and outlet pipe of balancing tank etc complete all as specified and directed by Engr-in-Charges (b) Cleaning of balancing tank walls, bottom and top with soft brushes, taking out the settled impurities at bottom complete drying and starlizing the complete tank to make it bactarial growth free complete all as specified and directed by Engr-in-Charge Note : Quoted rates shall be included for providing manpower and required cleaning material,safety gears and ladders etc required at site for drain out the balancing tank.

Cleaning the surrounding area of swimming pool and Pump House No 10 by cutting og grass, bushes, scrubs, weeds, dead roots etc and surface dressing of whole area complete all as specified and directed by Engr-in-Charges

M&L for fixing of DOL starter three phase 415 Volt for 2 HP electric motor with relay range 2.5-4.2 Amp including all fixing materials complete all as specified and directed by Engr-in-charge.

S&F MCCB 4 pole 150 Amp, 415 volt, of make: Havells or equivalent in existing panel including taking out of old one all as specified and directed by Engr-in-charge.

S&F On load Changeover 4 pole 200 Amp, 415 volt,in Sheet Steel Enclosure type of make: C&S or equivalent in existing panel including taking out of old one all as specified and directed by Engr-in-charge.

S&F 3 pole power contactor 220/440 volts with 45 Amp AC1 duty and 26 Amp AC3 rating type A26-30 including 1 NO auxillary switch of make: ABB or equivalent in existing panel including taking out of old one all as specified and directed by Engr-in-charge.

S&F 3 pole power contactor 220/440 volts with 60 Amp AC1 duty and 37 Amp AC3 rating type A40-30 including 1 NO auxillary switch of make: ABB or equivalent in existing panel including internal wiring and taking out of old one all as specified and directed by Engr-in-charge.

S&F single pole front mounted add on auxiliary contact block with 1 NC type CA5-01 of make: ABB or equivalent in existing panel including internal wiring and taking out of old one all as specified and directed by Engr-in-charge.

S&F thermal overload relay for direct mounting on contactors suitable for 18-25 Amp type TA25DU 6.5M of make: ABB or equivalent including internal wiring from switchgear to relay in existing panel and taking out of old one all as specified and directed by Engr-in-charge.

S&F Single phase Preventer Relay with adjustable time delay 30 sec to 5 min suitable for 415 volt AC, any type of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel including taking out of old one all as specified and directed by Engr-in-charge.

S&F flat three core submersible cable PVC insulated and sheathed multistranded copper conductor of cross sectional area 6 sqmm of make: Havells/ Polycab or equivalent complete all as specified and directed Engr-in-charge.

Disconnecting electrically incomming and outgoing LT UG cable of LT panel of any size and replace burn/unsv suitable size of aluminium bus bar, Welding work for hinches and doors, fixing the locking arrangement including scraping outdoor/indoor side of LT Panel and one coat of redoxide, two coat of synthetic enamelled seimens gray spray of outdoor/Indoor side and reconnecting LT UG cable with fixing aluminium lugs by using crimping tool, nut, bolt washer etc and all necesary work required for smooth functioning of LT panel all specified and directed by Engr-in-Charge.

S&F in replacement of suction sweeper stainless steel not less than 3 feet long comprising 600mm suction head spring loaded twin brush with PVC wheels, and fiber squeezer complete all as specified and directed Engr-in-charge.

Supply only PVC suction hose / pipe, green (1-2" ultra Light & flexible with PVC spiral ribbed for extra strength) with 2 male connector nipplesplus clamps (4 Nos.) complete all as specified and directed

S&F Nylon-Rope size 20 mm dia for suction sweeper , complete all specified and directed Engr-in-charge.

M&L in replacement of multigrade sand media from pressure sand filter sectional mesh type multi graded complete including taking out old media and cleaning of filter tank with suitable chemicals complete all as specified and directed by Engr-in-charge. [Note :- (i) All type of T&P and Labour etc shall be arranged by the contractor and rate for the same deemed to be included in the quoted rate. (ii) Contractor will dispose off the material taken out from the installation at appropriate location upto 50 mtr as directed by Engr-in-Charge]

Repair and maintenance of defective Centrifugal motor pump any make & model of capacity upto 2.5 HP of suction sweeper including required repairing like motor rewinding, replacement of minor spares like Motor bearing, Gland packing, Fan motor blade, Packing paper, Water seal, Starting Coil, Motor housing, S.S . sleeve repairing on Lathe ,Impeller Brass, Gun Metal Bush, Rubber Coupling Set, Rubber bush, Rubber gasket, nut bolt & any other minor connected items and testing after repairing including painting complete all as specified and directed by Engr-In-Charge. [Note: All type of T&P including dismantling and fixing required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.]

Repair and maintenance of defective Centrifugal motor pump any make & model of capacity upto 20 HP including required repairing like motor rewinding, replacement of minor spares like Motor bearing, Gland packing, Fan motor blade, Packing paper, Water seal, Starting Coil, Motor housing, S.S . sleeve repairing on Lathe ,Impeller Brass, Gun Metal Bush, Rubber Coupling belt, Rubber bush, Rubber gasket, nut bolt & any other minor connected items and testing after repairing including painting complete all as specified and directed by Engr-In-Charge. [Note: All type of T&P including dismantling and fixing required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.]

M&L for fixing of DOL starter three phase 415 Volt for 7.5 HP electric motor with relay range 2.5-4.2 Amp including all fixing materials complete all as specified and directed by Engr-in-charge.

Repair and maintenance of submersible pump set any make & model of capacity upto 45 HP including required repairing if any like motor rewinding, replacement of minor spares like CI/ MS bowl (As per existing size), stainless steel shaft with key, stainless steel sleeve, sand guard ,impeller lock with key, neck ring (as per existing size and type), stainless Steel thrust bearing, carbon plate, gun Metal bush, rubber bush, upper housing, lower housing, housing & sleeve repairing on Lathe, rubber gasket, nut bolt,painting and testing after servicing complete all as specified and directed by Engr-in-charge. [Note: (i) All type of T&P like chain pully block etc and lifting and lowering of motor pump along with column pipe,submersible cable from deep borewell out required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.(ii) New submersible cable will be measured and paid separately ]

Supply only calcium hypochlorite powder (chlorine content 65-70%) duly packed in sealed drum of make: M/s Rensa/Declibac/ Rayalshima Enterprise/ Birla Chemicals or equivalent all as specified and as directed by Engr-in-charge.

Supply only white crystal alum ferric of superior quality duly packed all as specified and directed by Engr-in-charge

Supply only copper sulphate blue crystal of superior quality duly packed all as specified and directed by Engr-in-charge

S&F,in repair self priming metering chlorination reciprocating dosing pump with max pressure rating 10 Kg/cm2 and discharge upto 6 LPH adjustable including solenoid coil with body,pulsar circuit,speed/stroke knob etc any make & model complete all as specified and directed by Engr-in-charge.

S&F,in repair PVC Injection check valve(NRV) 3/4'' with PVDF housing and Viton O-rings '

S&F,in repair but LDPE Dosing tube 3/8''x1/4''

S&F,in repair but Suction/discharge valve PVC

S&F,in repair but PVC Foot valve 3/4'' assembly

M& L for chlorine ppm comperator test Kit with colour indicators having 0.1 to 2.0 PPM with Resolution 0.01 pH, make:Avon/ Aquasol or equivalent.

Supply only Liquid O-Tolidine solution in sealed bottle of 500 ml

His And Her Enterprises (BID ID -3387167)

MTR GROUP & COMPANY (BID ID -3392174)

FUTURE Inc. (BID ID -3387562)

ANKIT SHIP REPAIRERS AND SUPPLIERS (BID ID -3400417)