Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.4 L
EMD Value
₹4,500
Closing Date
17 Nov 2026, 4:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Rural Development and Panchayat Raj Department
RAJNIKANTH SRINGERI
Providing bore well and motor and repeirs to veternary hospital at Jewargi town in Jewargi Taluka under Link Document 2403-00-101-0-28(140) for the year 2026-27 (for S.C. Bidders only)
RDPR/2026-27/BD/WORK_INDENT30323
RDPR/2026-27/BD/WORK_INDENT30323
Reserved
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Kalaburgi
8 documents required · 8 mandatory
₹500
₹4,500
7 Nov 2026
7 Nov 2026
17 Nov 2026
Providing bore well and motor and repeirs to veternary hospital at Jewargi town in Jewargi Taluka under Link Document 2403-00-101-0-28(140) for the year 2026-27.
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets.with all lead, lifts, loading & unloading charges, cost and conveyance of a...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x2.5 ...
Supply and delivery at site indoor type board consisting of two units of galvanized mild steel tubes heavy class (C-Class) as per IS 1239(Part-I) 1990 with latest amendments with ISI mark suitable for...
Errection,Electrification and commisioning works of Submersible Pump sets : Including alignment and balancing with all necessary erection of materials and labour supply and erection of two pair of sup...
Fixing a shunt capacitor of … KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor with all lead, lifts, loading & unlo...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws with al...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. with all lead, lifts, loading & unloading charges, cost and conveyance of a...
Supplying and fixing of Shunt trip suitable for MCCB.CBCT. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments incidental Charges etc., complet...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing of LED type panel board indicating lamp
with required colour suitable for 230/440v A.C. 50 Hz 12/24v
D.C with all lead, lifts, loading & unloading charges, cost and conveyance of...
Providing and fixing in wall lining flat pressed three layer (medium den- sity) particle board or graded wood Prelaminated one side decorative lamination and other side balancing lamination Grade I, T...
Providing & fixing 10 mm thick plaster of Paris (gypsum
anhydrous) ceiling up to a height of 5 m above floor level,
over first class kail wood strips 25x6 mm with 10 mm gap in
between and reinforced w...
Supplying and drawing Flexible Multicore Cable
manufactured with electrolytic grade flexible copper with low
conductor confirming to IS:8130-1984 and (Virgin) PVC
insulation sheathed suitabl 3C X 1.5S...
Supplying and drawing Flexible Multicore Cable
manufactured with electrolytic grade flexible copper with low
conductor confirming to IS:8130-1984 and (Virgin) PVC
insulation sheathed suitabl 4C X 1.5S...
Supplying and flush mounting teak wooden box without front
plank, made of not less than 12mm thick wood, after due
groove cutting, Finishing with necessary cement plastering
complete 10"x7"x3" (254x17...
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc., complete on the existing m...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...
Fixing all types and all capacities of fluorescent /false ceiling /
spot light / CFL / LED fittings indoor on the wall/ ceiling /
rafters / girders using 23/0.0076" twin twisted PVC insulated
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( 0.05 ) total coated thickness with zinc coating 120 g/m...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
47 work 17 Nov 26_47 work 17 Nov 26.pdf
Tender Document • 5.01 MB
47 work 17 Nov 26_Bid Document.doc
Tender Document • 0.93 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .