Maint of lift at MH including AMC of lifts under GE Gangtok

Amount

Routine maintenance and repair including renewal / replacement of minor defective parts of electrically operated lift of capacity 08 passenger (544 Kgs), fully down collective with microprocessor based control panel, automatic operated sliding doors, service ground plus upper two floors (G+2). MAKE - THYSSENKRUPP ELEVATOR(India) Co Ltd. installed at 178 MH Bldgs including carrying out the daily check and routine periodical service as mentioned in PS of fully automatic electric lift with power operated door to examine, lubricate & adjust the equipment and to carry out planned maintenance in a systematic and controlled manner using techniques and expertise trained skilled mechanics and engineer. The monthly services includes cleaning the machine room equipments, Clean & lubricate hoist way equipment & entrances, Cleaning the pit equipment, Greasing & oiling the bearings and guides, Cleaning lift cabin, car & all landing doors, Equalize the tension of all hoisting ropes. During the routine check up of lift if any parts of lift found to be replaced then the following spares will be replaced which are covered in the contract without any extra cost such as fuses, controller diode, buzzer, resistance 2K5, 24VDC OEN relay, 110VDC OEN relay, reed switches, M-card, 5V SMPS, VMVF card, VEVR card, car guide shoes, center guide shoes, LOP switches, COP switches and wiring of the control panel and inside the cabin, cabin fan, cabin light including tube light fitting complete to ensure safety and smooth operation of lift - 01 No

All as per item No. 1 but for the lift of capacity 15 passenger (1020 Kgs) service ground plus upper three floors (G+3). MAKE - ECE Industries Ltd. - 01 No

Supplying, fixing, testing and commissioning of SS Cabin for 800 mm Centre/Side Opening Door a made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick, Car Door Motor with Built-in Rotary Encoder, VVVF Drive for Car Door operation, Full Length / Infra Red Sensor, 64 Beams for Car Door including Transmitter, Receiver and Control Unit working on 230 Volts, AC and including taking down existing Auto Door Car Operator complete all as specified and as directed electrically operated lift of capacity 08 passenger

Supplying, fixing, testing and commissioning of SS Cabin for 800 mm Centre/Side Opening Door a made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick, Car Door Motor with Built-in Rotary Encoder, VVVF Drive for Car Door operation, Full Length / Infra Red Sensor, 64 Beams for Car Door including Transmitter, Receiver and Control Unit working on 230 Volts, AC and including taking down existing Auto Door Car Operator complete all as specified and as directed electrically operated lift of capacity 15 passengers

Supplying, fixing, testing and commissioning of Auto Door Landing Mechanism of 800 mm Centre Opening Door along with Bottom Aluminium Cill and MS Powder Coated Frame and including taking down existing Auto Door Landing Mechanism complete all as specified and as directed.

Supplying, fixing, testing and commissioning of Auto Door Landing Panel of 800 mm Centre/ side Opening Door, made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick with Vision Panel of size 200 X 800 mm with 8 mm Toughened Glass, of Moon Rock finish and including taking down existing Auto Door Landing Door Panel complete all as specified and as directed .

Supplying, fixing, testing and commissioning of COP [Cabin Operating Panels] made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick including Buttons, Lock, all relevant features, Wiring and taking down existing COP complete all as specified and as directed.

Supplying, fixing, testing and commissioning of LOP [Landing Operating Panels] made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick including Buttons, Lock, all relevant features, Wiring and taking down existing LOP complete all as specified and as directed.

Supplying, fixing, testing and commissioning of 4 Nos Sleek LED Round Light Fittings 8W and One Fan & Grill for Cabin Roof made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick, Mirror Finish and taking down existing lights, fan and grill complete all as specified and as directed.

Supply, fixing testing of Travelling cable 24 core x 0.75 sq mm complete all as specified and as directed.

MAX ELEVATOR

M/s Dhapola Elevator and Engineering