RENOVATION OF BLOOD COLLECTION CENTRE IN DEPT OF PATHOLOGY AT INHS ASVINI UNDER AGE I ASVINI

Amount

S&F 9mm thick 600x600mm size gypsum prelaminated tiles false ceiling on aluminium anodized snap grid of size 605 mm x 605 mm with aluminium anodized angle 20 mm x 20 mm x 1.2 mm fixed to wall along the perimeter of ceiling with the help of nylon sleeves & screws, at 610mm centres and main and cross tees of size 31.75 mm x 31.75 mm x 1.6mm & 25.4 mm x 25.4 mm x 1.22 mm respectively with ceiling cleats / angle brackets of size 15 mm x 15 mm x 1.5 mmincluding 4 mm dia.G.I.wire suspended from the soffit at 1220 mm centres (upto 1200 mm length maximum) fixed to roof slabs by means of steel expansion fasteners10mm dia. complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading ,gaskat for glazing/ paneling,with fittings for doors with handle ,hinges including door sealing brush strip wools C.P. brass/ stainless steel screws complete all as specified.

(i) Glazing/wiremesh shall be measured and paid separately.

(ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight.

S&F glass door assembly 12 mm thick toughened glass frosted one side for glass door,single shutter including SS pivot of floor door closer at top and bottom SS corner guard of 100 mm SS handle 600 mm long fixed at both faces rubber beading on sides and bottom for sealing completly including all SS fittings and lock assembly as required superior quality complete all as specified and directed by Engr-in-charge

S & F sheet glasses,frosted 4.80mm to 5mm thick glazing all with aluminum beading, glazing pin. etc, or with oil putty in square exc .5 sqm in each pane

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

M & L 0.9 mm decorative laminate type 1 of surface finish , colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction

S & F 12 mm thick plywood grade BWR fixed with screws including fixed to aluminium frame work , as in partition ,panelling,doors, cupboards, shutters etc including necessary fixing arrangements as directed by Engineer in Charge.

M & L of point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Black colour), 1100 volts grade cable, FRLS, passing through PVC casing caping 25/32mm including accessories and S&F PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:-

One light point controlled by one way switch.

One fan point controlled by one way switch with fan regulator.

One 3 pin socket outlet, 5 Amps on the Independent board.

All as per item No 8.00 above but with 4.0 sqmm cable for one 3 pin socket outlet 15 Amps on the independent board.

S & F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size complete all as specified and directed.

M & L modular switch, 1 way 6 Amp, 1 module complete all as specified and directed.

S & F modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed.

S & F modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

M & L modular switch, 1 way 16 Amp, 1 module complete all as specified and directed.

S & F in LED 4-6 W Surface track light fitting (spot lamp) Aluminium/PVC/Polycarbonate body complete all as specified and directed.

supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and as directed.

Supply and fix wall mounted fans with complete accessories , 230 volts, 50 Hz,400 mm sweep ,110 W speed 2050 RPM minimum air delivery 90 CFM, including connecting up with three core flexible copper conductor cable for suitable size Complete all as specified and as directed.

Supply and Install hi wall split units indoor/outdoor capacity 2.0 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity as shown. Note : Cost of extra copper tubing to be borne by contractor.

Supply and fix sheet metal enclosures with socket plug top and MCB each single pole 20 Amps all as directed by Engineer-in-charge.

M & L for point wiring with Aluminium conductor 4 sqmm cable multi stranded elastomer sheathed cable in and including PVC Conduit/ casing caping including PVC insulated 4 sqmm earth continuity conductor multi stranded for one industrial metal clad power socket independent from nearest DB all as specified and directed by Engr-in-Charge.

Supply and Fix angle iron stand for fixing of outdoor unit including fixing arrangement complete all as specified.

Supply and fix PVC drain pipe 25mm bore as outlet drain, fixed to wall with necessary saddles or laid under floor complete all as specified and directed.

SHREE JAGDISH FURNITURE CO. (BID ID -3183920)

AAGAM ENTERPRISES (BID ID -3186112)