Providing independent water works Dhani Dariyapur

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Clear water pump set 600 LPM, 45 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating (Suitable HP) Four star rating

B) Raw water pump set 600 LPM 12 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating (Suitable HP) Four star rating

Supply and fixing following C.I. D/F pipe and specials/Sluice valves/ Non Return valves/Bell mouth/Reflex valves including cost of Jointing materials, excavation, laying, jointing reffiling including making adequate support of masonry/concrete steel for delivery/and erection pipe from bell mouth in the collecting tank to the rising main laid by the department as per plan shown from the foundation wall of the pump chamber for all the raw water and clear water pumping sets at water works as per specification given in Scheudle No. II (i) 2 Nos pumps for clear water & 2 Nos for raw water A) Detail of pipe and specials A) CI D/F bends, Reducers, tees etc. for H/W, P/M

C.I. D/F PIPE 100 MM

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items. a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 600 LPM x 45 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items. a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 600 LPM x 12 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- 1. Incomer Switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp. Capacity. 3. Volt meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating lamp - one set

Supply erection, testing of ISI marked copper wire for 4 Nos motors with under ground system in PVC and flexible pipes copper wire size 10mm Sq three core complete in all respects with accessories like thimble etc.

Supply erection, testing of ISI marked copper wire for 2 No panel boards from main switch to panel and wiring of panel with size 6mm sq 3 core complete in all respects with accessories like thimble etc.

Supply erection, testing of light fittings including wire in the Pump chamber with material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications.

Providing laying jointing and fixing of cast iron “V” notch duly marked with beam including embedding.

Providing & fixing suitable floating arms along with swivel bend as per required specifications approved by Engineer-incharge (200 mm)

Laying of pipe line at Head Works Stringing out DI pipe and special casting along trenches and laying the same in trenches to correct alignment and gradients including cartage from Divisional store or nearest railway station to site of work and return of piece of pipe to store. a) 100 mm internal diameter pipe line laid complete

150 mm internal diameter pipe line laid complete

200 mm internal diameter pipe line laid complete

Cutting DI pipes and specials and chipping or filling surface to a uniform finish. 100 mm i/d

Jointing DI socketted pipes, valves & specials with rubber fitted complete including cost of labour and tools etc. and tested complete. 100 mm i/d

D.I. Tees, Bends, Reducers etc. for distribution system all specials duly ISI marked

Laying of pipe line at Head Works Stringing out DI pipe and special casting along trenches and laying the same in trenches to correct alignment and gradients including cartage from Divisional store or nearest railway station to site of work and return of piece of pipe to store. a) 150 mm internal diameter pipe line laid complete

Cutting DI pipes and specials and chipping or filling surface to a uniform finish. 150 mm i/d

Jointing DI socketted pipes, valves & specials with rubber fitted complete including cost of labour and tools etc. and tested complete. 150 mm i/d

D.I. Tees, Bends, Reducers etc. for distribution system all specials duly ISI marked

Supply & erection of Wall Mounting Type, solenoid driven, motor-less electro-magnetic diaphragm Dozing/ Metering pump working on single-phase, 220/240 V 50 Hz electric supply with standard electronic controls suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure complete with necessary accessories.Make-Fontus or any other standard make Along with supply & erection of 1 No voltage stabilizer with each dozing pump alongwtih 1 No 300 ltrs. Capacity ISI marked HDPE storage tank, with each dozing pump of Sintex or other reputed & approved make.

Operation & Maintenance of Water Works as per Schedule-IV for a complete job of five year after 3 month of trial run & defect liability 1st year

2nd year

3rd year

4th year

5th year

Bidder Name

Amount

Rajbir Singh

Sandeep Duhan

SANJAY KUMAR CONT

Sunder Pal Contractor

Sunder Pal Contractor

Rajbir Singh

Sandeep Duhan

Sandeep Duhan

SANJAY KUMAR CONT

Rajbir Singh