REPAIR/ REPLACEMENT TO FENCING, COMPOUND WALLS, GATE, DRAIN, HARDSTANDING AND PATHWAY ETC IN B-1 AND B-3 AREA OF AGE B/R-II UNDER GE (WEST) JALANDHAR CANTT

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars, walls and parapet walls etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 (but except bricks) complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan in half brick thick wall, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for providing 35mm thick (measured solid) precast cement concrete louvres and jallies in PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) including all mouldings set in cement mortar (1:4), including all necessary form work and reinforcement including taking down old jallies complete all as specified and directed .

Material and labour for plain cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, as in sides of rounded, coping/benching/plinth band lintles etc.,kneelers, apex stones, bed plates, kerbs benching etc, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and as directed.

Taking down cement plaster of any description on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for rendering 15mm thick in cement mortal 1.6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for preparation of newly plastered or unplastered surface of walls applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling structural steel work including doors, gates, flats and MS round bars but excluding framed truss etc. complete all as specified and directed.

Material and labour for framed work as in doors, gates, guard bar etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) Quality A complete all as specified and as directed.

Dismantling of fencing posts/ struts of any description (wood, steel or RCC) embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good to disturbed surface complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil and removing surplus spoil to a distance n exc 50 metre and making good the disturbed surface complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling, post hole, mass concrete etc complete all as specified and directed.

Supply and fixing rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe290 -W (Gde-E- 165) quality-A complete all as specified and as directed.

Supply and fixing chain link fencing 10 gauge galvanised steel wire and of mesh size 75mmx75mm including line wires, binding and fixed to steel fencing post nuts and bolts, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply and fixing mild steel galvanised 2strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. including taking down old barbed wire complete all as specified and as directed. (each line of wire to be measured)

Supply and fixing Mild steel rag or lewis bolts, 12 mm dia, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged lewised, n exc 15 cm long complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) of any description in ground floor and paving not exceeding 15 cm in thickness (below or above ground level) and removal surplus spoil out of defence land where directed at a level n. exc 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for 100mm thick plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregate as in alternate bays, floor, surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 25mm thick cement concrete 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate as in levelling course, surface finished rough to receive topping floor/tiles complete all as specified and directed.

Material and labour 100 mm thick PCC 1:4;8 type D2 (using 40 mm graded crushed stone aggregate) as sub base of floor complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub-base for floors, surface finished even and rough to receive top finish complete all as specified and as directed.

Material and labour for chequered cement concrete tiles 30cm x 305cm x 25mm thick, set, jointed and pointed in neat cement slurry in paths, floors laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointing in white cement with pigment to match complete all as specified and directed.

Material and labour for sand filling under floors or in foundation including consolidation with plate vibrator before and after laying paver blocks etc complete all as specified and as directed.

Material and labour for 60 mm thick, machine pressed precast conctete (white) interlocking paver block M-35 grade, any shape and size, conforming to IS 15658-2006, with grey cement and no pigment, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channel and drains etc, complete all as specified and as directed.

Material and labour for precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) and set in Cement Mortar (1:4) as in landings, drains cover slabs, chajjas, shelves and similar articles including necessary form work all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fixing mild steel round bars 10 mm dia over, cut to length, bent to shape required inclunding carnking, bending spirally for hooping for coloumns , hooking ends and binding with the including mild steel wire (annealed) not less then 0.9 mm dia or securing with clips complete all as specified and as directed.

Supply and fixing mild steel work in flat bands straps etc for hold fasts wind ties etc conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charge.

Supply and fixing Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour for factory made kerb stone using PCC 1:2:4 type B0 (12.5 mm graded aggergate) as road side edgeing/ chamfered complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair mild steel 1.60mm plain black sheet in wall cladding steel gates and waliagtore for repair bays similar works cut to size holes punched inculding round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc complete all as specified and directed by Engr-in-Charge.

Material and labour for repairing 1.25 mm thick laths steel rolling shutters, including ball bearing, as specified including top cover, anchoring rod, hasp and staple and greasing as required; erected in position as indicated, complete push pull or manual type complete all as specified and directed by Engr-in-charge.

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old decorated surface of walls applying one coat of cement base paint complete all as specified and directed.

Material and labour for grubbing up bushes, tree truck of trunk portion n. exc 10cm grith including cutting of trees/bushes grown in soil/ sides of drainage area/ inside of drainage/ diging out tree with roots and making good disturbed area of wall/roofs with PCC 1:3:6 type and using 20mm graded stone aggregate complete all as specified and as directed.

Removing the existing cover slab open drainge from of internal dimenions not exc. 2.0 mtr width and depth n.exc.1.5 mtr, taking out entire sludge/sludge water incl foreign materials/ mud/soil /grass etc from drainage & both sides of drainage / with water, removing the sludge with water or dry sludge all as per side requirment to a distance n.exc 50m and burring the entire sludge complete all as specified and directed by Engr-in-Charge.

G S TRADERS

NIRMAL SINGH

ADITI CONSTRUCTION CO

M/S Kuldip Construction Co.

Barmotra Infrastructures

NATIONAL BUILDERS

KARTIK BUILDERS

M/S Vinod Kumar

SARASWATI CONSTRUCTION CO