External electrification work for construction of 12 NGO 48 Constable Qtrs Police Radio Indore

Amount

Supplying and erection of HT/LT over head line single length supports complete with aligning and keeping it in truly vertical position, including digging pit of required size in all type of soil/rocks filling with 1:3:6 cement concrete of 0.60 mtr. dia. around the pole up to ground level including muffing of 0.45 mtr. dia. from ground level to 0.45 mtr. high as per specifications with 20 cm. thick base foundation in 1:4:8 cement concrete as required refilling the pit with boulder and soil as required, including painting of pole with bitumen paint below GL and two coats of red oxide and two coats of aluminium paint or synthetic enamel paint above GL as directed complete as per specification. The depth of burying of pole shall be 1/6th of the length of pole. a) H Beam 13 Mtr Long 152x152 or 150x150 mm 37.1 Kg/Mtr. weight

Supplying and fixing of angle / channel / flat iron / RS Joist fittings for over head lines as cross arms / brackets / clamps etc. including nut bolts, required holes, welding, cutting, fabricating with necessary materials including two coats of red oxide and two coats of aluminium or synthetic enamel paint etc. as required.

Supplying and erection of GI/MS stay set complete with stay rod, anchor plate of size 300x300x5mm, thimble, stay clamp, turn buckle, bow tightener etc. with stay wire, strain insulator, nut bolts as per specifications including excavation in all type of soil/ rocks and foundation in cement concrete 1:3:6 of required size and other necessary materials complete as required as per specifications. b) GI Stay Rod 20 mm dia 1.8 m long with 7/3.15mm stay wire for LT line

Supplying and fixing polymer 11KV/33KV HT Disc (strain) insulator of approved make on existing pole or bracket with GI hardware and other necessary materials complete as required. a) 11 KV Strain insulator set (Hardware suitable upto Racoon conductor)

Supplying and fixing polymer 11KV / 33KV pin insulator with GI pin, of approved make on existing pole or bracket with other necessary materials complete as required. a) 11 KV Pin Insulator

Supplying and drawing ACSR/AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any). a) AAAC DOG conductor 0.10 Sq. inch (100 sq.mm Al.Eq.)

Supplying installing, connecting, testing and commissioning of 3 Phase, 50 Hz, 11/0.433 KV or 33/0.433 KV, Delta/Star connected, Aluminium/Copper wound, oil filled, Indoor/outdoor type, Distribution/Station transformer of accepted standard specification, 4 star catagory class, with accessories such as drain & filter valve, earthing terminals, lifting arrangements of suitable size, dehydrating breather with silica gel of suitable size, Conservator tank, air release devise, Rating & diagram plate including CI rollers, Radiators with shut off valve, Cable end boxes on HT & LT side bushings, Explosion vent with diaphragm, Off load tap changing switch, Buchholz relay, thermometer pocket with 6” dial type thermometer & OTI, wherever required complete with first filling of oil with installation on existing DP structure or foundation etc. complete as per specification. The no load and full load losses should not be more than as mentioned below. b) 100 KVA 11/.433 KV BIS CERTIFIED, ENERGY EFFICANCY (EE) LEVEL-II

Providing and fixing outdoor type pole mounting weather, dust and vermin proof LT distribution box made of 14 gauge MS sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide after antirust and corrosion treatment, two coats of synthetic enamel paints of approved make and shade, consisting of following fittings: For 100 KVA Transformer a) 200 Amps 35 KA breaking capacity TP MCCB with neutral link for incoming - 1No. b) 4 strip aluminium bus bar 225Amps supported on epoxy insulators - 1 Set c) 160/200 Amps, 415Volts DMC cutout with base for outgoing feeder with 160/200 amp HRC - 9 Nos. d) GI earth terminals- 2 Nos. e) 6 Lever Godrej Padlock with 3 keys - 1 No. f) Light point with switch and lamp holder with lamp - 1 No. Distribution box complete as above (a to F) as per MPKVVCL norms & specifications complete.

Providing and fixing earthing arrangement for HT/LT poles with 8SWG GI lead of 115 turns of 50 mm dia. connection with pole / cross arm / control junction box on pole with 4 mm dia. GI lead through 20 mm dia A class GI protection pipe of 2.5 m length duly bend, packing of charcoal powder and salt as per specification including excavation of pit in all type of soil / rock, refilling of pit by black cotton soil etc. complete.

Supplying, laying, testing and commissioning of XLPE insulated and PVC sheathed heavy duty power cable confirming to IS 7098/Part-I/88 with latest amendments, 1100 volts grade armoured cable of approved make with aluminium solid / stranded conductor. The cable shall be laid in air/in existing pipe/in existing cable trench/on existing cable tray with clamp as required as per specifications including providing of metal/PVC cable identification tags at both ends and every 10 Mtr. length of cable with inscriptions there on. Un armoured cable 1 core 150 Sq.mm

Un armoured cable 1 core 70 Sq.mm

4 core Armoured 10 Sq.mm.

Supplying and fixing 2 ply 12 gauge barbed wire around the existing HT/LT electric pole for safety measures as per IE rules including all stapples and all other necessary materials complete as required as per specifications.

Providing and fixing enamelled danger caution plate/board on existing electric poles or wherever required of size 250x200 mm, made of 1.6mm thick mild steel sheet and vitreous enamelled white, with latest, figures and the conventional skull and cross-bones in signal red colour (as per IS-5-1978 with latest amendment) on the front side. The rear side of the plate shall also be enamelled. The corner of the plate shall be rounded off with required material such as screws, wires clamps, nut bolts etc. complete. a) 11 KV

Commissioning of D P structure over existing support with panting in an approved manner consisting of following :- (A) D. C. cross arm with clamp, nuts & bolts (100 x 50 mm only ) - 1 set (B) 11 KV D. O. fuse unit, lightings arrangement and AB swich mounting channel with nuts and bolts (75 x 40 mm channel) of require - 1 set (C) 11 KV Polymer AB swich single phase 600amp. as required - 1 set (D) Transformer mounting cross arms / channels with clamps nuts and bolts (100 x 50 mm channel ) - 1 set (E) 11KV Polymer Do fuse unit ( set of 3 no.) - 1 set (F) Transformer clamping set (50x50x6 mm angle ) with nuts and bolts etc. complete - 1 set (G) Transformer belting set (50x50x6 mm angle) with nuts and bolts etc. complete - 1 set (H) 11 kv polymer lightning arrestor ( 9 kv gapless type ( 5 kA ) for DTR ) ( set of 3 No.) - 1 set (I) supplying , fixing, testing and connecting of complete earting set of 7 No. as per MPMKVVC.Ltd. circular No DS CO M/EZ/ WS/1516/DT 17-03-2008 and approved dwring for transformer sub - station including all materials GI Strips, GI wires, Charcoal power salt excavation of pits in all types of soils/rocks etc. as required complete .( 1 set of 7 Nos.) -1 set (J) Distribution panel mounting channel and clamp with nuts & bolts etc. (75 x 40 mm channel ) 1 – set (K) Supplying , fixing, testing and Commissioning of DTR Meter LT. 3 phase 4 wire 3X240 volts I 3 A. LTCT operated 3 phase 4 wire 3x63, 5 volts , LB = 5 amps lmax 10 amp trivector meter glass of accuracy 0.5s DLMS complaint category a meter along with GSM ( GPRS compactable ) modems with box i/c all accessories and formalities as per MPMKVVCL as required. or 3P 4w - 5A LTCT class 5s DLMS compliant type c. rs - 232. Port box MRI LTCT 100/5A i/c meter box with TTB etc as required.(High precision thread through coposite meter upto 100 KVA) (L) SF & T and HT tape for covering LT bushing i/c windings and blower hitting complete minimum 30 meter or as required. D.P. Structure Complete as above (A to L)

Supplying and drawing AAA conductor Rabbit for jumpering /guard wire/earth wire/bearer wire 18.62 mm sq (4.87mm dia/6 swg)conductor of approved make with stringing making of complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles.

Providing and fixing chain link/Wire Mess fencing sourriding existing DTR S/S finicing (total 37 running meter maximum) of 6’ height with chain link/Wire Mess fencing on MS Angle (50X50X6) mm support 7 nos. 7’ height with following feature. (A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size. (B) MS strip of (25X5) mm flat shall be used fro cross bracing of fencing (C) Double Gate (2nos. 2.5’X5’) of MS angle (50X50X6)mm. bracing of 25X5 mm flat with mesh & locking arrangement.Complete as above ( A to C) – one job.

Supplying and fixing street light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy>90 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 3KV. Housing made of pressure die cast aluminium with heat resistant flat glass / Lens type, IP65 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe bracket upto 2 mtr. long in required angle/shape, connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer. 90 WATT

Supplying and erection of steel tubular pole swaged type as per IS:2713 1980 Complete with baseplate and top Canopy (with G.I. pipe bracket as required), supports complete with digging and keeping it in truly vertical position i/c digging pit of required size filling with 1:3:6 cement concrete of 0.60 meter dia. of required length around the pole i/c muffing of 0.45meter from ground level as per specification with 20cm.thick base foundation providing and busying 15mm.dia.G.I.pipe from bottom to 1.5meter above ground level on pole, refilling the pit i/c. painting of pole with bitumen paint in bottom and one coat of red oxide and two coat of aluminum paints etc. complete as per specification. The depth of foundation shall be1/6th of the length of pole. (A) Supply of steel tubular pole swaged type as per IS:27131980 Complete with base plate and top Canopy -410 SP-29 - 9.00 metre

Supplying fixing testing and commissioning of metallic Street Light Box of required size With MCB,Bus Bar & connecter etc as required.

Suppying & installing G.I. Pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc. complete in an approved manner as required to complete excluding cost of excavation/dismentalling & other finshed masonary Item complete. For 'B' Class pipe ISI Marked (IS-1161-68)(SOR Page No.88,I.No. 41.12.1.5) 32.00mm

Supply and laying rigid PVC single socket and, nonmetallic pipe ISI Marked (IS-4985-2000) 10 Kg/sq.cm class 5 for protection of under ground cable/or for water pump delivery side, for water supply complete with necessary clamp coupler, band, Tee, Elbow etc. in an approved manner excluding cost of excavation etc. 50.00mm O.D

Supplying and installation, of totally enclosed dust, vermin and weather proof outdoor type cubical feeder pillar of required size, fabricated with 14 SWG CRCA sheet, free standing type with MS angle iron frame of size 50x50x5mm, 4 Nos. legs each of 1.2 meter long of 50x50x5mm angle iron etc., suitable sheet steel sloping hut type canopy on top of feeder pillar with 50mm projection on all sides of feeder pillar for protection against rain/weather etc. The feeder pillar shall be painted with 100 micron powder coating on all sides, door etc. after anti rust and anti corrosive treatment, vertical/ horizontal bus bar of required size and length, fixed on SMC sheet with insulators, GI hardware, neoprene gasket, inter connection with copper wires/cables of bus bar, switch gear, MCCB, MCB, Cutout or wherever required with suitable lugs of required capacity and size, providing earthing terminal bus bar of size 25x5mm with GI nut, bolts at outside of the panel with earth continuity GI strip 25x5 mm inside the panel with holes, providing engraved name plate with rating of incoming and outgoing feeder and house No., eye bolts, suitable cutouts with wire mesh jali for ventilation, detachable gland plates. The feeder pillar to have hinged type double door on front side with locking arrangement, including Godrej lock, separate chamber for incoming and outgoing MCCB/MCB etc. complete including supplying, fixing, connecting, testing and commissioning of the following materials and accessories:- (A) MCCB with Breaking Capacity 25 KA at 415 V Current Rating -200 Amps & 80% - 100% adjustable 1 No. & Current Rating-25 to 100 Amps & 80% -100% adjustable 4 Nos. (B) MCB Four Pole (FP) 50 Amp to 63 Amp Rating 2 Nos. Aluminium Busbar with all required accessories

Earthing with G.I. Earth plate 600mm X 600mm X 6mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt ) complete as required.

Add Extra for using salt and charcoal / coke for G.I. Plate orCopper plate earth electrode as required includingexcavation & refilling.

Providing and fixing 25mm X 4mm G.I. strip on surface or in recessed/concealed for connection etc. as required

Om Shiv Associates

B L JAIN

Pankaj Electricals