Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.8 LAccepted-AOC AMLA TOLA DISTT KATIHAR BIHAR 854105 | KATIHAR | BIHAR | 854105 | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹38.5 L+₹2.7 L (7.40%)Rejected-Finance MADHUBANI BAZAR PURNEA PO PARORA PS K NAGAR PURNEA BIHAR | PURNEA | PURNEA | BIHAR | 854301 | L2 | Rejected-Finance Not lowest |
Tender Value
₹43.7 L
EMD Value
₹87,400
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PURNEA
GE AF PURNEA, P.O - CHUNAPUR AIR FIELD, DIST- PURNEA BIHAR, PIN CODE- 854303
PROVN OF PRE PRIMARY SCHOOL AT AIR FORCE STATION PURNEA UNDER GE (AF) PURNEA
2023_MES_593405_1
8016/E8
Open Tender
Civil Works
Item Rate
180 days
PURNEA
Please Refer Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) PURNEA
₹87,400
Yes
27 Jun 2023
4 May 2023
15 Jun 2023
4 May 2023
13 Jun 2023
18 May 2023
Amount
Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and getting out in any type of soil complete all as specified and as directed.
Excavation over areas n exc 1.5 m deep and getting out in any type of soil compplete all as specifed and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation filling for fixing post holes complete all as specified and as directed.
M&L for RCC (design mix) M-25(using 20mm graded crushed stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC (design mix) M-25( using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts & struts etc complete all as specified and as directed.
M&L for RCC (design mix) M-25 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m clear span complete all as specified and as directed.
M&L for RCC (design mix) M-25 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like complete all as specified and as directed.
M&L for RCC (design mix) M -25 (using 20mm graded crushed stone aggregate) as in chajjas, complete all as specified and as directed.
M&L for brick work with subclass ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including 0.9mm dia mild steel wire or securing with clips complete all as specified and as directed.
S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including 0.9mm dia mild steel wire or securing with clips complete all as specified and as directed.
Use & waste of form work to sides of concrete foundation, footings, bases of columns raft and raft beams, side and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for flat rough finished surfaces complete all as specified and as directed.
Use & waste of form work to sides of pillars, posts, struts, pears and stanchion square or rectangle or polygonal for rough finished surfaces complete all as specified and as directed.
Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished surfaces of concrete, complete all as specified and as directed.
Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping similar work not exc 200mm thick, and flat fair finished surfaces complete all as specified and as directed.
Use & waste of formwork to chajjas, troughs and similar items including edges with rough finished surfaces of concrete complete all as specified and as directed.
M&L for hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface complete all as specified and as directed. NOTE:- Volume of hard core shall be measured after consolidation.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base to floors, finished even and rough complete all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar (1:4), including integral WPC by weight of cement as per manufacturer's instructions complete all as specified and as directed. NOTE:- Supply only WPC shall be measured and paid separately.
M&L for 5 mm thick rendering on fair faces of concrete surfaces, finished even and smooth as on ceiling, roof projection, chajja in cement mortar (1:3) complete all as specified and as directed.
M&L for preparing plastered or unplastered new decorated surfaces of walls and applying two coats of acrylic emulsion distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of cement base primer with and including over 2mm thick cement based putty over plastered surface to prepare the surface even and smooth complete all as soecified and as directed.
M&L for preparing new decorated surfaces of walls surfaces and applying two coats of exterior emulsion weather proof paint over a coat of primer complete all as soecified and as directed.
M&L for preparing new decorated ceiling surfaces and applying two coats of oil emulsion distemper on ceiling surface with and including over a coat of primer complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for preparation of steel and iron surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 8 to 9mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including over 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.
M&L for vitrified ceramic coloured tiles (double charged) of 10mm thick (square or rectangular) polished area of each tile not exceeding 0.36 as in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match with and including over 15mm thick bedding layaers of CM (1:6) complete all as per specified and as directed.
M&L for glazed ceramic coloured tiles as per IS-13753, of size (300mm x 450 mm) x 7mm thick as on vertical surfaces such as skirting /dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with and including over 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces as backing coat complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and directed.
S&F 150mm size aluminium handles, cast type, anodised complete all as specified and as directed.
S&F 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
M&L for pressed steel frames of size (125 x 60) mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete with and including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for 35mm thick factory made, 2nd class hard wood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
S&F box type Factory made pressed steel frame steel windows with side hung shutters including box type hinges, steel handle, mild steel ISI marked tower bolt 100mm size (minimum 2 for each shutter)and steel peg stay, complete with glazed bars, dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and as directed. Note :- Glass panes and guard brass shall be measured and paid separately.
Description all as per ser item no. 41.00 here in before but without glazing bars complete all as specified and as directed.
S&F steel window or ventilators, fixed type, with glazing bars, including a shop coat of zinc chrome primer complete all as specified and as directed.
S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specofied and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specofied and as directed.
S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specofied and as directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sqm in each pane complete all as specofied and as directed.
S&F aluminium anodised barrel tower bolts 200mm size of extruded section and fixed complete all as specified and as directed.
S&F aluminium handles, cast type, anodised150 mm long complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top and providing joints through out the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed at site.
S&F vitreous china wash down water closet pan `P` or `S` trap (pedestal pattern) white including fixing bolts, including connection to drain pipe ( or out going pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and as directed at site.
S&F vitreous china squatting pan, 'Orissa' pattern, size (580 x 440)mm white, with integral foot rests including 'P' or 'S' CI trap, lime concrete bedding and making good the floor complete all as specified and directed.
S&F 10 ltrs PVC flushing cistern low level (white) with inlet, ball valve float and handle with and including PVC connection and 32mm dia PVC long bend for square pattern etc. complete all as specified and as directed.
S&F vitreous china wash hand basin white, counter type oval shape of size 500mmx456mm fixed with 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including waste fitting etc complete all as specified and as directed.
S&F granite (of any type) slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding to edges such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
S&F bib taps suitable for 15mm dia of pipe, cast copper alloy, fancy type, chromium plated, with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F mixer tap suitable for 15mm dia of pipe, cast copper alloy, fancy type, chromium plated, for mixing hot & cold water with centre hole mixer with fittings complete all as specified and as directed.
S&F stop valves suitable for 15mm dia of pipe, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with capstan head handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F stop valves suitable for 25mm dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F tubular towel rail 600mm long between flanges, 20mm dia brass chromium plated, D type complete all as specified and as directed.
S&F jets brass chromium plated to EWC`s with long jet pipe (flexible) and connections etc complete all as specified and as directed.
S&F 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc., complete all as specified and as directed.
Description all as per srl item No 64.00 here in before but 25 mm bore pipe complete all as specified and as directed.
S&F 500 ltrs capacity rotational moulded polythene water storage tanks 3 layer any colour (cylindered vertical closed top), hoisted and fixed in position with and including necessary nipple suitable for inlet, outlet and overflow pipes, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe, anti mosquito cap etc and fixed all as specified in SSR Part –I complete all as specified and as directed.
M&L for cast iron floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) complete all as specified and as directed.
S&F 75mm bore PVC pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F 110 mm bore PVC pipe single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bend provided with access door/shoe 110mm bore fixed to rain water pipe complete all as specified and as directed.
S&F PVC (SWR) bend (any radius) 75mm bore provided with access door complete all as specified and as directed.
S&F PVC (SWR) vent cowl suitable for 75mm bore pipe complete all as specified and as directed.
M&L for priming the roof surface with bitumenous primer conforming to IS-3384 @ 0.3 Ltr/Sqm and applying a coat of semi hot blown 85 / 25 grade blown bitumen @ 1.2 Kg / Sqm and thereafter supply and laying APP modified Polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 100 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85 / 25 grade bitumen @ 1.2 Kg / Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm including 2 coats of bituminus aluminium paint, complete all as specified and as directed. Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.
M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4) mixed with water proofing compound complete all as specified and as directed.
Supply only integeral water proofing compound complete all as specified and as directed.
Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for 60 mm thick glossy rubber moulded interlocking machine pressed precast concrete paver blocks of approved shape and pattern conforming to IS-15658-2006, M -35 Grade laid dry over and including 30mm thick compacted sand bed complete all as specified and as directed.
M&L for 150 mm dia RCC NP3 pipes, laid on 150 mm thick bed with excavation in any type of soil, including manholes / drop manholes of brick masonry / RCC / Precast RCC with SFRC ventilating cover and frame including all items and activities to execute and make sewer line functional, for depth 0.70m to 1.65m complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required in 150mm internal dia pipe complete all as specified and as directed.
Supply and laying 50mm dia (outer) 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings fixed to wall, ceiling and laid in trenches complete all as specified and as directed.
Description all as per ser item No. 81.00 here-in-before but for 32 mm dia pipe complete all as specified and as directed. Note for ser item No. 80.00 & 81.00 :- Cost of cutting chases in wall shall be deemed to be included in unit quoted rate.
S&F PP-R gate valves (brass insert) 50mm outer dia as per requirement of the site complete all as specified and as directed.
S&F PP-R gate valves (brass insert) 32mm outer dia as per requirement of the site complete all as specified and as directed.
Construction of valve pit chamber of brick masonary valve pit of size (600 x 600 x 600) cm with brick work 50 mm thick, internal and external plaster in CM (1:4) inlcluding (25 x 25 x 5)mm MS angle iron frame all around the fixed point by means of 04 Nos hold fast 150 mm long made out of flat iron (25 x 6)mm embedded in PCC block (1:2:4) type B1 including hinges welded with angle iron frame and MS cover 3 mm thick, MS handle of suitable locking arrangements and applaying two coat of synthetic enamal paint over a coat of red oxide primer with and including necessary excavation and earth work in soft/loose soil complete all as specified and shown in TD.
M&L for cutting PPR/ cast iron pipes of dia 100 mm and reducing to required length before laying for insertion of Tee comlete complete all as specified and as directed.
Excavating in trenches n exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and getting out in any type of soil complete all as specified and as directed.
Material and labour for sand cushioning / sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.
M&L for sub class B bricks laid perpendicular over cable protection complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation of pole/stay complete all as specified all as directed.
M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in coping with and including necessary use and waste of form work and finishing exposed surface/white washing complete all as specified and as directed.
Supply and plantation of Dup grass including preparation of ground to required depth and filling of sweet earth, cow dung and watering etc complete all as specified and as directed.
Supply and plantation of Palm Tree (height not less than 45cm above ground level) including preparation of ground to required depth and filling of sweet earth, cow dung and watering etc complete all as specified and as directed.
M&L for ATT at the top surface of filled earth by using of 5 ltr emulsion per sqm of the surface area,complete all as specified and as directed.
M&L for ATT at the soil under plith protection by using of 5 ltr emulsion per sqm of the surface area,complete all as specified and as directed.
M&L for treating the bottom and sides ofexcavation by using of 5 ltr emulsion per sqm of the surface area,complete all as specified and as directed.
M&L for ATT at the soil alongwith external perimeter of building by using of 2.25 ltr emulsion per meter of the perimeter wall,complete all as specified and as directed.
M&L for synthetic enamel paint (Play school painting like:-cartoon painting and theme art painting) on pre-painted plastered surface of wall,complete all as specified and as directed by Engr-in-Charge.
M&L for concealed point wiring for one light /fan/bell point controlled by one switch with PVC conduit of 1.5 sqmm size single core multi stranded copper conductor unsheathed PVC insualted 1100 V grade FRLSH cable drawn into and including PVC coduit 20 mm dia with accessoris and fittings like bend, elebows, crosses wall crossing etc including sunken MS boxes suitable for housing modular switches/ sockets/ regulators etc and with continuous single core cable 1.5 sqmm copper conductor PVC insualted, unsheathed as earth wire connected to earth dolly complete all as specified and as directed.
Description all as per item No 98.00 here-in -before but point wiring for 3 pin 5 Amps socket outlet on independent (Multiple) board controlled by one switch complete all as specified and as directed.
Description all as per ser item No 98.00 here-in -before but point wiring with 2.5 sqmm copper conductor suitable for 3 pin 15 Amps socket outlet on independent (Multiple) boards controlled by one switch with one single core earth continuity copper conductor of size 2.5 sqmm complete all as specified and as directed.
Description all as per ser item No 98.00 here-in -before but point wiring with 4.0 sqmm copper conductor suitable for metal clad plug socket on independent (Multiple) boards controlled by one switch with one single core earth continuity copper conductor of size 4.0 sqmm complete all as specified and as directed. Note for srl item No. 93.00 to 96.00 :- Cost of cutting chases, face and back plates for fixing fittings shall be deemed to be included in unit rate.
S&F modular switch 1 way 6A, 1 module with and including modular cover plate with frame ,complete all as specified and as directed.
S&F socket 6A - 2/3 pin combined 2 module with and including modular cover plate with frame ,complete all as specified and as directed.
S&F socket 6A/16A - 2/3 pin combined, 2 module with and including modular cover plate with frame ,complete all as specified and as directed.
S&F modular switch 1 way 16A, 1 module with and including modular cover plate with frame ,complete all as specified and as directed.
M&L for concealed PVC conduit submain wiring with 3 run of single core FRLSH 6 Sqmm (Nominal area) PVC insulated, unsheathed, multistanded copper conductor cable 1100 Volts grade drawn through and including PVC non-metalic conduit of suitable size medium grade (ISI marked) with all fittings and fixing accessories on roof, wall, ceilings of PRE Fab structure etc complete all as specified and as directed. Note:- Three run of 6 Sqmm cable and one run of PVC conduit in wall/ceiling shall be measured as one unit length.
S&F double door sheet metal enclsoures TPN DB 4 way with 200 amps rated bus bar 415 volts complete all as specified and as directed.
S&F sheet metal enclosures double door DB 8 way, SPN, 200 Amps Bus bar 240 Volts complete all as specified and as directed.
S&F isolater/MCB TPN 415 volt, 63 Amps complete all as specified and as directed.
S&F isolater/MCB SPN 240 volt, 40 Amps C curve, complete all as specified and as directed.
S&F MCB SP 240 volt, 6 to 32 Amps, C-curve, 10KA complete all as specified and as directed.
S&F ceiling rose, 3 pin PVC /Polycarboante, isolated body complete all as specified and as directed.
S & F modular stepped type electronic fan regulator flush type 2 module complete all as specified and as directed.
S&F fans ceiling complete and accessories 230 V, 1200 mm sweep with brushless direct current motor complete all as specified and as directed. MAKE:-HAVELLS (MODEL-ES40) or equivalent make of USHA,ORIENT,BAJAJ.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed. MAKE:-HAVELLS (MODEL-TURBO FORCE SP) or equivalent make of USHA,ORIENT,BAJAJ.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
M&L for earthing complete with copper earth palte electrode (600 x 600)mm x 3.15mm thick buried direct in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanized iron copper strip (20 x 3) mm by means of bolts nuts, check buts and washers of galvanized rion and steel complete all as shown in electrical plate No 3 connected to earth test point including necessary excavation and earth work in any type of soil, chamber cover, wire mesh, funnel , test point, GI protection pipes of 32mm bore, GI watering pipe 20mm bore, necessary salt and charcoal etc complete and testing on completion.
M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one single pole MCB complete all as specified and as directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and as directed. Note:- Excavation, earthwork and protection of cable shall be measured and paid seperately under respective items of BOQ.
M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) complete all as specified and as directed. Note:- Excavation, earthwork and PCC shall be measured and paid seperately.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and as directed. Note:- Excavation, earthwork and protection of cable shall be measured and paid seperately under respective items of BOQ.
S&F weather proof juction box made of thermoplastic polycarbonate with gasket comply with IP-66, dust and jet water proof of size (205 x 255 x 112)mm suitable size for cable size upto 16 to 50 sqmm alongwith cable inter for terminal and three phase with neutral Aluminium busbar including controlled with MCB 6 Amp "C" curve complete with necessary item including a pairs of MS flat iron clamp of size (40x 5)mm with 10mm nuts, bolts of suitable length with washer including two coats of synthetic enamel aluminium paints (first grade) over a coat of red oxide primer to fix in steel tubular pole/pcc pole, complete all as specified and as directed. Make- Hensel Cat No- KF2525 B or its equivalent make of M/s Sintex Industries Ltd M/s C & S Electric Ltd.
S&F cable PVC insulated sheathed type 2.5 sqmm 3 core insulated copper conductor cable from juction box to street light fitting, hanger light/blast pen light complete all as specified and as directed.
S&F LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
S&F rigid non metallic PVC conduit, heavy duty, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, redusers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 20 mm dia complete all as specified and as directed.
ALAM ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .