Shifting of HT/LT line due to Improvement of such as widening and strengthening of Samuntiapalli Kelua Road from 0/000 to 5/777 Km in the District of Ganjam under State Plan

10 Mtr long 300 KgPSC Pole as per RE Specification including cost of all material, labour, labourcess, T&P, taxes, conveyances ,contigency,salvage etc. Complete required for the work as per direction of the Engineer-in-charge

160x152 mm (30.44 Kg/ Mtrs) WPB Pole (11' Mtrs)

9 Mtr long 300 Kg.PSC Pole

R.C.C. Base plate for support 20 KG

11KV V Cross arm (10.2 Kg each)

GI Back Clamp for' V' Cros Arm (0.85 KG each)

11 KVF clamp 2.9 Kg

Fish Plate 50x8rnm.,0.97kg/Mtr.,each 0.280mtr. Length

Disc insulator (T&C) 45KN Polymer

Hardware fitting (T&C) 45KN .

11 KV Pin Insulator polymer

8.0 mm2 AAAC

PG Clamp for 80mm2 AAAC

4X95+1x95+1X16 mm2 XLPE AB Cable

Suspension Clamp with 'I' Hook

EYE hook for (XLPE Aerial bunched Cable)

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

Conductor Dead End Clamp suitable for bare messenger XLPE Aerial bunched Cable(25-70 sq.mm)

Earthing Coil

No-8 GI wire (Dia 4.6mm) 0.131 KG/Mtr.- 2 Mtr. For connecting pole with Coil earthing

H.T. Stay set (Complete)

Stay Insulator

Say clamp or Stud Clamp

7/10 SWG stay wire

GI Nut,Bol & washer

100X50X6mm. MS Channel for straight cross arm (1.2m X 18 pcs) (9.2Kg/mtr.) + +(0.3m X 18 pcs) (9.2Kg/rntr.) for tapping & cut point pole + Galvanisation charges

. 100X50X6mm. GI Channel for straight cross arm (1.5 m X 4 pcs)for Guarding

No-6 G.I.wire (Dia 4.8 mm), 4 Kg each for 4 Nos guarding & 20 Kg for 2 Nos earthing at both sides of road crossing guarding

EYE hook for Guarding

8 SWG G.I, eire for cross lacing

G.I. Pipe Earthing 40mm Dia medium gauge 03mtr long at both end of guarding

Anticlimbing Device(GI barbed wire 3kg per support)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's =(8x0.59x0.510)

Danger board

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's =(2x0.59x0.510)

Black paint

Yellow Paint

Sundries

material for earthing including masonary work

Couping with cc 1:1.5:3

Concreating of support 9 mtr wpb cc1:1.5:3

Concreating of support 10 mtr wpb cc1:1.5:3

Concreating of support 11 mtr wpb cc1:1.5:4

Cement Concreatingfor stay anchor/studs plate

Survey of incremental/ delta network and assets(11KV LINE) (GIS SERVICES)

Survey of incremental/ delta network and assets(LTLINE) (GIS SERVICES)

(PART-II)4-Pole Structure 160x152 mm (30.44 Kg/ Mtrs) WPB Pole (11 .Mtrs)

Disc insulator (T&C) 45KN Polymer

Hardware fitting (T&C) 45KN

11KV Pin Insulator polimer

PG Clamp for 80mrn2 AAAC

Anticlimbing Device(GI barbed wire 3kg per support)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's =(8x0.59x0.510)

Danger board

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's =(2x0.59x0.510)

100x50x6 mm GI Channel 2.8 mtr long 8 Nos for top channel (9.2Kg/mtr) & 8 nos for Lower Bus system of 4 pole structure

4 pole Bracing Channel (100x50X6)mm 2.8 mtr long (9.2 Kg./Mtr.)

50x50x6mm angle for cross bracing of DP 3.5 Meter long 8 Nos (4.5kg/Mtr)

Earthing of Support( Coil Type)

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.-2 Mtr. For connecting pole with Coil earthing

G.I. Pipe Earthing 40mm Dia medium gauge 03mtr long at both end of guarding

G.I. Flat 25X6 mm for Earthing

G.I. Nut, Bolt & Washer of different sizes.

Black paint

Yellow Paint

Sundries

material for earthing including masonary work

Concreating of support 11mtr wpb cc1:1.5:3

Couping with cc1:1.5:3

(PART-III) Dismanting Charges for Old Materials Dismantaling of PSC Pole(8/9Mtrs)

Dismantal of LTA ABC

Dismentalng of Joist Pole

Dismantling mantling Charges for 34/55 AAAC

Dismantling of steel structure

Please Enable Macros to View BoQ information