Repair/Maint to fencing, gate, compound wall, drain/drain cover, hume pipe culverts and sewage line etc in Zone B at BB Cantt, Srinagar.

Amount

Cleaning of blockage of Indian or European type water closet including blockage of Nahani trap or floor trap or gully trap of any size type upto the Ist manhole (blockage of any type took place at IWC or EWC, blockages of kitchen trap, bathroom, wash hand basin trap due to stuck of any substance or material due to any other reasons to the entire satisfaction of users/ Occupants manually or with using pumping device or any other suitable method or mechanically and getting the signature of the users on complaint slip for Zone 'A' area at BB Cantt Notes:- (i) . Contractor shall deploy four numbers of Safaiwala's to carryout day to day complaints (incl Sunday/holidays) of blockage etc and complaint slip shall be collected from the Complaint cell of AGE B/R-I. (Time of 05 x safaiwala-0900hrs to 1700hrs).

BOQ item No 1.00 Contd.... (ii). Contractor has to make sure that the blockage complaints so received shall be completed within the 24 hours from the time of receipt and for any delay in completion of the particular complaint a penalty of rupees One hundread fifty (Rs 150/-) shall be recovered from the dues of contractor for delay in completion of complaint per day per complaint. (iii) Contractor has to make sure that upon requirement by the sub-division, the contractor has to depute the same four or more Safaiwala's for cleaning of MES Honey sucker after use of the equipment at GE 864 MT area. (iv).The payment shall be made to employees/safaiwala on or before 7th day of every calender Month. Payment to the employee shall be done by crossed ECs/NEFT through Aadhar linked bank account only and shall not be less than minium fare wages as per minimum Wages Act. (v). Contractor has to submit proof of payment and proof of EPF subscrption made by him alonghwith RAR/Final Bill. (vi). Contractor shall quote the rate considering employees monthly leave,relever etc as per labour law and nothing extra will paid on this account.

BOQ item No 1.00 Contd.... (vii).The rate quoted shall be inclusive of suitable reliever of manpower engaged by contractor. (viii) Cost of attendance register, printed work diary ,material register/security or entry passes and any other stationary reqd is to be born by the contractor and the rates quoted for the above are included in the quoted rates and no extra cost shall be claimed shall be entertained on this account. (ix) Penalty :- In case of absence of Safaiwalla the penalty shall be imposed @ Rs 800.00 per person per day and the same shall be recovered from contractor's dues. (x) Being defence installation, the contractor shall ensure that antecedents of the personnel deployed are verified through concerned Police authorities before their deployment. The character and antecedent verification report of each employee deployed by the contractor should be submitted. (xi) Contractor shall submit all documents before receipt of work order (Aadhar Card, Police verification and Bank Pass book Aadhar linked copy) of each worker intend to deploy on work.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for foundation, shafts, cesspits, manholes, pier holes etc. not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified and as directed.

Description all as per serial item No. 2.00 here-in-before but exc.1.5m depth but not exc 3.00 mtr depth.

M&L for PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregates) as in foundations, filling in and mass concrete, complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and as directed.

Removing of excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above the starting point, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidaly hearted, built in CM 1:6 etc complete all as specified.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm of granite or trap stone complete all as specified.

M&L for raking out joints/pointing to random rubble masonry uncoursed or brought up to courses on old walls built in cement mortar all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M & L for rendering 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M & L for rendering 10mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in coping etc. including weathering, slightly rounded or chamfered angle and throating, including necessary use and waste of formwork complete all as specified and directed.

Demolition of reinforced Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slab for manhole etc. including necessary use and waste of formwork, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; iron gate, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.

M&L for 150mm bore salt glazed stone ware (SGSW) drain pipes, Grade ‘A’, laid in trenches and jointed including demolition and breaking up drain pipe set in cement mortar complete all as specified and directed.

Description all as per serial item No. 22.00 described here-in-before but 200mm bore dia pipe.

M&L for 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars including demolition and breaking up drain pipe set in cement mortar all as specified and directed.

Description all as per Srl No 24 above but 200mm dia pipe.

Description all as per Srl No 24 above but 300mm dia pipe.

M&L for Concrete bed to drain pipes for 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement mortar 1:3:6, type C-2 all as specified and directed.

Description allas per Srl No 27 above but 200mm dia pipe.

Description all as per Srl No 27 above but 300mm dia pipe.

Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering complete all as specified and directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet (any pattern) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L type or J type or cranked hook bolt, in roof, wall etc with grade of zinc coating 275 complete all as specified.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as directed

Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.

M&L for cleaning of manhole of any size, depth not exc 1.5 mtr including taking off manhole cover and refixing the same after cleaning, dewatering and disludging mechanically, removing the waste materials and sludge to a distance not exc 50 mtr and depositing where directed at site in borrow pits, complete all as specified and directed. Notes :- (a) The quoted rates shall be included for earth work / excavation and removing of surplus soil to a distance not exceeding 50 metre.

Description all as per Srl No 36 above but depth exc 1.5 mtr

Cleaning of drain pipes (SGSW / RCC / AC) of any size including manholes channels by mechanically from manhole to manhole for cleaning eye and well flushing with water after cleaning including taking off manhole cover and refixing the same after cleaning and removing waste material / sludge to a distance near by suitable distance and depositing in the borrow pits, complete all as specified and directed.

Cleaning of CI/PVC pipe of any bore and size, laid in trenches/walls including bends / junctions / gully traps etc. and removing of sludge, if any to a distance not exc 50 mtr from starting point and depositing, complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing all as specified.

Description all as per srl item No 40 above but 20 mm bore pipe complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

Description all as per srl item No 42 above but 75 mm bore pipe, complete all as specified and directed.

S&F 100 mm dia sand cast, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, including necessary bends, fittings etc laid in trenches or in floors, walls etc including taking down old CI pipe complete all as specified and directed.

Description all as per srl item No 44 above but 75 mm bore pipe, complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor & pavings n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

M&L for 75mm thick PCC (1:4:8), Type D2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.

M&L for rubber moulded chequered cement concrete tiles with grey cement cement and pigments 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade , with grey cemeent and no pigment including 30 mm thick san cushion complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed or bedding layer in CM 1:3 complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applied two costs of cement base paint complete all as specified and directed.

M/s Lal Enterprises

mirandcompany

M/S SHAH CONSTRUCTION COMPANY

ZAHOOR ENGINEERING WORKS