IMPROVEMENT TO BUILDING NO T 68 PROVISION OF WORK SERVICES FOR TTLE AIRFRAME PROVN OF WORKING PIT IN MVRS SECTION IMPROVEMENT TO PAINTING BOOTH AT 8 BRD AND CERTAIN REVENUE WORKS AT 23 ED AF STATION AVADI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.

Demolition of cement concrete (un reinforced) in ground floor/paving not exc 15 cm thick below or above ground level all as specified and directed.

Material and labour for Plain cement concrete, (1:2:4), type B-0 (using 12.5 mm graded stone aggregate) 25 mm average thickness finished even and fair without using extra cement complete all as specified and directed

Material and labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15 mm thick in cement mortar (1:4) complete all as specified and as directed.

All as per item No. 5.00 described here-in-before but as in vertical surfaces such as skirting, dados, etc over and including backing coat of 10mm thick in cement mortar (1:4) all as specified and as directed.

Material and labour for Non skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar 1:4, 15 mm thick complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles as in vertical surface of size 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10 mm thick in cement mortar (1:3) as in vertical surfaces of walls/skirting, etc., complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles 30cmx 30cm x 25mm thick as approved by GE set jointed and pointed in neat cement slurry as in floors with white cement & pigment over and including screed bed of 15 mm thick in cement mortar (1:4), all as specified and as directed.

Material and labour for Brick work with fly ash bricks using Old size bricks, straight or curved on plan exc 6 metre mean radius, built in CM 1:6 all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or stone walls including ceiling plaster etc including racking out joints hacking for key scrubbing down with water etc and removing debris outside the premises all as specified and as directed.

Material and labour for rendering 15 mm thick in CM 1:6, on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & fair all as specified and directed.

Material and labour for rendering 5mm thick in cement Mortar (1:4) mixed with Water proofing compound over 10mm thick backing coat in CM (1:6) on fair faces of brick or on concrete surfaces finished even and fair, all as specified and as directed. Note : WPC shall be measured and paid separately

Material and labour for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3 mm thick wall care putty to internal surfaces of wall complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3 mm thick wall care putty to internal surfaces of wall complete all as specified and as directed.

Material and labour for preparation newly plastered surface of wall applying two coats of cement based paint over coat of Primer on external wall surface complete all as specified and as directed

Material and labour for Complete removal of existing treatment and applying two coats of cement based paint over a coat of primer all as specified and as directed.

Dismantling of wall and ceiling boards or insulation board/slabs/ blankets any thickness including cover fillet all as specified and directed.

Material and labour for anodised aluminium snap grid false ceiling of panels of size 605 x 605 mm using aluminium anodised wall angle of size 25 x 25 x 1.5mm thick fixed to walls with rawl plug and screws n. exc 1.50m c/c and intermediate panels using main "Tee" and cross "Tee" aluminium anodised section of size 35 x 25 x 1.50mm and 25 x 25 x 1.50mm thick suspended with GI wire of 4mm dia at 1.2 m interval all as specified and as directed

Supply and fixing 10 mm thick PVC insulation penal with EPS stuck to 1mm Printed PVC sheet suitably placed in aluminium snap grid false cellig ( snap grid aluminium measured separately) all as specified and as directed.

Taking down chowkats or frame exc. 1.50 sqm but not exc 4.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and as directed.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed.

Supply and fix 2nd class hard wood, plain solid straight chowkats and frame wrought framed rebated on the solid rounded or chamfered put together with glue pinned and joints all as specified and as directed.

Supply and fix 30 mm thick flush shutter, solid core constraction with partical board core and both side face coverd with decorative face veneer with lipping/ frame to match complete all as spacified and directed.

Supply and fix 100mm long aluminium anodised barrel tower bolt of extruded section all as specified and as directed.

Supply and fix 100 mm long, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and as directed.

Supply and fix 150 mm long Extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

Supply and fix Mild steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and as directed.

Supply and fix anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc., complete; all as specified and as directed.

Supply and fix powder coated aluminium fixed type window and ventilator shutters, (minimum thickness of powder coating 50 micron), without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and fix 5.0 mm thick frosted sheet glass ordinary quality and glazing with rubber beading in aluminium shutters in squares exc 0.5 sqm each pane all as specified and directed.

Material and labour for Tubes, 15mm bore, 'medium grade' galvanised, with all GI fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

All as per item No. 32 above but 20mm bore tube.

Supply and fix 15 mm dia stop valves fancy type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union all as specified and directed.

Supply and fix Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe, all as specified and as directed.

Supply and fix Bib tap, 15mm dia, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for union pipe or brass ferrule & fixed all as specified and as directed.

Supply and fix Vitreous china water closet pan (pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified and as directed

Supply and fix 10 Iitre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets all as specified and as directed

Supply and fix 2 in 1 health faucet (Parryware or its equivalent) with 1.5 m tube and hook all as specified and as directed.

Supply and fix vitreous china oval type counter top wash basin white flat back size 560 x 410 x 180 mm including waste fittings of brass chromium plated 32 mm (excluding waste pipe, taps chain and plug) complete all as specified and directed. Make - Prayag. Cat no 4790 or equavalent.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15mm thick screed bed in CM 1:6 all as specified and as directed.

Material and labour for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

Supply and fix 15 mm dia center hole Basin mixer screwed down high pressure with HOT or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and as directed. Make : Prayag Cat No 8350 or equavalent.

Supply and fix brass CP Tubular towel rail, 20mm dia, D type, 60 cm long between flanges all as specified and as directed.

Supply and fix Shop dish any type fixed to plugs with chromium plated brass screw complete all as spacified and directed.

Supply and fix 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and as directed.

Supply and fix 75mm bore PVC SWR bend any radius all as specified and directed.

Supply and fix 110 mm bore PVC SWR bend any radius all as specified and directed.

Supply and fix 110 mm PVC ( SWR) WC connector with lip ring to fit wc outlet all as specified and as directed.

Supply and fix 75 mm bore PVC ( SWR) junction, single ( Single T ) equal or un equal all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tranch complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tranch, complete complete all as specified.

Supply and fix 1000 litres capacity rotational moulded polyethylene, three layer, water storage tanks (Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I, complete all as specified and as directed.

Supply and fix ball brass valves, 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferule and fixed all as specified and as directed.

Supply and fix PVC ( SWR ) gully trap 125/110 mm setting and jointing with solvent cement all as specified and as directed.

Supply and fix PVC ( SWR ) 75 mm dia nahani trap including setting and jointing with solvent cement all as specified.

Supply only integral Water proofing compound.

Excavation over areas not exc 1.5 m deep, and getting out in hard/dense soil all as specified and directed.

Excavation over areas exc 1.5 m deep, and getting out in hard/dense soil all as specified and directed.

Material and labour for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

Material and labour for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in bed blocks all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick concrete surfaces and finished fair and even complete all as specified.

Material and labour for MS Rolled section as in main and cross beams, hip and jack rafters, conforming to Fe 410W Gde E-250 Quality A all as specified and directed.

Material and labour for GI tubes medium grade 80 mm bore as in cattle trap all as specified and directed

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick using soil obtained from excavation all as specified and directed.

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8, type E2 (using 40 mm graded stone aggrigate) as in sub base of floor all as spacified and directed.

Material and labour for reinforced cement concrete M-30 grade (Design mix) using 20 mm grade granite stone aggregate as in foundations, including rafts, footings, foundations, beams,plinth beams, bases all as specified and as directed.

Material and labour for Formwork to sides of concrete foundations, footing bases of colums, plinth beams rough finished surfaces and similar work vertical or to batter for flat surfaces complete all as specified and as directed .

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed .

Material and labour for TMT bars 5 mm dia and over up to and including 10 mm dia as in stirups, specers and binders all as specified and as directed .

Supply and fix Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) all as specified and as directed .

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and as directed .

Supply and fix Plate ( plain or chequered ) chennels, squre cut or notched (ondinary and counter sunk forming hole with out any attachment,with riveted, bolted or welded attachment all as specified and as directed .

Supply and fix Mild steel screw bolts (machine made) with hexagonal or squre heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagnal or squre nut length of bolt exc 5cm and n exc 10 cm long all as specified and as directed .

Supply and Fixing stainless steel Railings or pole (with chain/without chain) for bridge, balcony, stair, deck and mounted on stair wall and floor all as specified and as directed. Make : Jindal

Material and labour for Preparation of new steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer all as specified and as directed .

Material and labour for 100 mm thick Plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as spacefied and directed

Supply and fix MS framed work such as grills grating etc with ends of bars shoulderd and or riveted or forget in to spike framed guard bars iron door, ledders/working pit frame or similar work conforming to Fe 290 Grade E-165 all as specified and as directed.

Supply and fix 50 mm thick 2nd class hard wood for boarding as in floor, planed one side & edges tongued and grooved and fixed with scerws complete all as spacified and as directed.

Material and labour for TMT bars 6 mm to 8 mm dia, cut to length bent to shape required including cranking bending, spirally for hooping for column hooking ends and binding with and including MS wire annealed not less than 0.9mm dia all as specified and directed.

Material and labour for RCC 1:2:4, type B-1 using 20 mm graded stone aggrigate as in slab supported on wall beam and colum in floors roof lading balconies canopies deck slab and in shelves and the like etc, all as specified and directed.

Material and labour for prepration of new wood surface of any description not therwise described over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer all as specified and directed.

Material and labour for rendering 10 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smoth with out using extra cement in CM 1:6 all as specified

Material and labour for machine cut kota stone slab size (600 x 600mm) flooring 20-25 mm thick over and including 15 mm thick (1:4) cement mortar screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material and labour for machine cut kota stone slab size (600 x 600mm) flooring 20-25 mm thick on vertical surface over 15 mm thick (1:4) cement mortar screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and dismantling complete all as specified and directed.

Supply and fix e toilet of size 3 ft x 4 ft with western toilet and 1 KL Bio Digester and one soak pit for water drain with following material specifications :- (a) Wall Panels : 50mm thick panels having material 0.5mm thick PPGI on both sides of the panel. Puff as infill with density 40 +/- 2 Kg/m3. (b) Insulation : Puff filled. (c) Roofing : 50 mm thick puff panels. (d) Ventilation : One exhaust fan provided in each cabin. (e) Toilet Pan : Ceramic commode of floor mounted Western Style. (f) Electrical fittings : 1 CFL and 1 Switch in each compartment. (g) Site Installation and Supervision : One qualified & authorised person. (h) Waste Management : To be connected with 1 KL Bio Digester.

Note : The price inclusive of the following :- (i) Super structure (ii) Transportation and erection at site.(iii) Loading and unloadidng at site. (iv) Water connection from existing source. (v) Drain to 1 KL Bio Digester and one soak pit for water drain.

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

Material and labour for point wiring with single core FRLS PVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 sqmm (Nominal area) drawn through and including non metallic rigid PVC conduit, medium grade, ISI marked not less than 20mm dia, concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box powder coated of suitable size for mounting modular switch sockets and regulators and drawing continuous earth wire of FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 sqmm (Nominal area) complete all as specified and as directed for the following: Note: (a) Cost for cutting, chasing and making good to existing surface are deemed to be included in the Quoted rate.

One light point/fan point controlled by one switch.

One 3 pin 5 amps socket point on independent board

One 3 pin 5 amps socket point on same board

One bell/buzzer point controlled by bell push

Material and labour for pointing wiring with 4 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC concealed conduit not less than 20 mm dia and its accessories including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, including steel box of required module for modular switches/sockets all as specified for one 15A socket on independant board.

Material and labour for point wiring with two single core 1.5 Sq.mm size multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green colour PVC insul-ated,multistranded copper conductor PVC cable as earth continuity conductor, 1100 volts grade, complete drawn in and including rigid PVC CONDUIT 20 mm dia and conduit accessories, confirming to IS specifications, Concealed in wall fixing on ceiling/trusses with suitable clamps , screws etc.,including 1.6 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc., including connecting up and testing , all as specified and as directed for :-

One light point/fan point controlled by one switch.

One 3 pin 5 amps socket point on independent board

One 3 pin 5 amps socket point on same board

Material and labour for pointing wiring with 2.5 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20 mm dia and its accessories including one run of 2.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box fixed to wall with 3 mm thick laminated hylam sheet top cover all as specified for One flood light point/ heavy duty fan point controlled by one switch.

Material and labour for pointing wiring with 4 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20 mm dia and its accessories including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified for One 5 pin 5/15 amps socket point on independent board

Supply and fix switch piano, flush type, single pole one way, 5 Amps 240 volts all as specified and as directed.

Supply and fix switch socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type all as specified and as directed.

Supply and fix stepped type electronic fan regulator flush type all as specified and as directed.

Material and labour ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and as directed

Supply and Fixing Modular switch 1 way 6A, 1 module all as specified and as directed

Supply and Fixing Modular switch 1 way16A, 1 module all as specified and as directed

Supply and Fixing Modular Bell push 6A, 1 module all as specified and as directed

Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 module all as specified and as directed

Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module all as specified and as directed

Supply and Fixing Modular White cover plate with frame,1 module all as specified and as directed

Supply and Fixing Modular White cover plate with frame, 2 module all as specified and as directed

Supply and Fixing Modular White cover plate with frame, 3 module all as specified and as directed

Supply and Fixing Modular White cover plate with frame, 4 module all as specified and as directed

Supply and Fixing Modular White cover plate with frame, 6 module all as specified and as directed

Supply and Fixing Modular White cover plate with frame, 8 module all as specified and as directed

Supply and fix LED Spot light fitting 15w 230v attractive wall mounted/floor mounted made up of high grade engineering plastic material suitable for retrofit with white reflecter suitable lamp holders connecter block etc complete pre wired and including lamp & connecting up with suitable wire required. Make:-Havells Model CYLINDROTSS15W830S24DWHT or equivalent make listed in PS.

Supply and fix Endura linear LED 22 Watt 4K surface/wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete including connection from ceiling rose to light fitting with twin core cable 23/0.0076 Sqmm complete all as specified and as directed. Make : Havells Cat pt No ENDURALINEARNEOBS22WLED830SPCWH or equivalent make listed in PS.

Supply and fix LED panel light 36 watt integrated electronic driver complete including connection from ceiling rose to light fitting with twin core cale 23/0.0076 Sqmm complete all as specified and as directed. Make : Havells Catpart No ENDURASLIMPROPLUS2X2PLR28/36WLED840MOD or equivlant make listed in PS.

Supply and fix LED down light 18 watt integrated electronic driver complete including connection from ceiling rose to light fitting with twin core cale 23/0.0076 Sqmm complete all as specified and as directed. Make :Havells Cat part No:-EDGEPRORDDLR18WLED840S or equivlant make listed in PS.

Supply and fix LED flexible strip light warm white colour with electronic driver with all connected accessories for 5mtr roll complete all as specified and as directed. Make :Havells Cat part No :- FLEXISTRIP5MTRIP2055WLED830S equivlant make listed in PS.

Supply and fix LED energy saving industrial type tube light fitting of capacity 36/40watt, IP65 with high efficancy integrated electronic driver complete including connection from ceiling rose to light fitting with suitable size of connection cable complete all as specified and directed.

Supply and fix LED energy saving High bay light fitting of capacity 150watt, IP65 with high efficancy integrated electronic driver complete including connection from ceiling rose to light fitting with suitable size of connection cable complete all as specified and directed.

Supply and fixing Exhaust / ventilation fan with louvers of size 300 mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to ventilation fan for giving connection complete all as specified and directed.

Supply and fixing Exhaust / ventilation fan with louvers of size 600 mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to ventilation fan for giving connection complete all as specified and directed. Havells Model Turpo Force SP or equavalent make listed in PS.

Supply and fix Water heater storage type (Gyeser), electric supplied and installed complete of capacity 25 litres including suitable size connection pipe Hot/cold type with connected fitting accessories complete all as specified. Make: Havells(Adonia R) or equivlant make listed in PS.

Supply and fix wall mounted fan of 400 mm sweep 230 V, 50 Hz, including clamps, nuts and bolts etc. all as specified and as directed. Make :- Havells or equavalent make listed in PS

Supply and fix wall mounted turbo force air circulator fan of 750 mm sweep 230 V, 50 Hz, including clamps, nuts and bolts etc. all as specified and as directed.

Supply and fixing ceiling fan 1400mm sweep complete with out fan regulator 230 volts (single phase) and provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for giving connection complete with suitable down rod as per site requirement all as specified and as directed.

Supply and Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps complete all as specified and directed.

Material and labour for power/sub main wiring with two runs of single core 6 Sqmm size and one run of single core 6 Sqmm (green colour as earth continuity conductor) FRLS PVC insulated, unsheathed, multistranded copper conductor cables of 1100 volts grade drawn through and including rigid PVC conduit 25mm dia and accessories, all conforming to IS specification, fixed on wall /ceiling etc. with suitable clamps, screws etc. and connecting up with terminal lugs complete all as specified and as directed. Note : (i) Two runs of cable with one run of earth continuity conductor cable alongwith PVC conduit shall be measured as one unit.

Supply and fix Sheet metal enclosure (DB) Single Pole and neutral 8 way, double door, 240 Volt with 200 Amps rated bus bar complet all as specified and as directed.

Supply and fix Sheet metal enclosure (DB) Single Pole and neutral 4 way, 240 Volt with 200 Amps rated bus bar double door complete all accessories complete all as specified.

Supply and fix Load Line TPN vertical distribution board 4 Way double door dust protected (IP- 65) powder coated inclusive of busbar neutral link blanking plate suitable for incoming MCCB TP 100 Amps 16 KA -01 and out going MCBs Complete all as specified. (MCCB and MCB shall be measured separately.)

Supply and fix MCB TPN 4 pole 63 Amps all as specified and as directed.

Supply and fix MCB SPN 40 Amps all as specified and as directed.

Supply and fix MCB SP 6-40 Amps complete all as specified and directed.

Supply and fix MCCBs 100 Amps 415V, 16KA, 3 Pole complete all as specified and directed.

Taking down old defective main cable any size and description complete all as directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation and laying of cable etc and getting out in soft/loose soil all as specified and directed.

Material and labour for dry river sand for filling in trenches below and around underground cable for cushioning of cable complete all as specified in clause No 19.75 of SSR Part I. Note: Only punned thickness shall be measured and paid

Supply and laying sub class ‘B’ bricks, laid flat and dry perpendicular to the direction of cable adjacent to each other, in trench for cable protection complete all as specified and directed.

Material and labour for GI tubing light grade laid in trenches, in floors, on wall and road crossing for cable protection of size 50 mm dia complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored , electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 4 core complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored , electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified.

Material and labour for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe medium grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type B2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I (1991) all as specified and directed by Engr-in-Charge.

S K ENTERPRISES

VIJAYALAKSHMI ENTERPRISES

RKRISHNANANDSONS

RAVI ENTERPRISE

B K R ENTERPRISES