Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹53.4 L+₹2.8 L (5.47%)Rejected-Finance CHOWDHARY APARTMENT BLOCK II FLAT NO 7 3RD FLOOR PUNJABIPARA SEVOKE ROAD SILIGURI DIST DARJEELING 734001 | JALPAIGURI | WEST BENGAL | 734001 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹55.4 L+₹4.8 L (9.43%)Rejected-Finance C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹57.3 L+₹6.7 L (13.2%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE SEVOKE ROAD POST SALUGARA DISTT JALPAIGURI WEST BENGAL
SPL REPAIR TO OFFRS MD ACCN PO 07 AND MD ACCN KP 02 AND MINOR WORK AT SEVOKE MIL STN UNDER GE SEVOKE ROAD
2022_MES_533310_1
GE/SEV/09 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹96,000
Yes
25 Aug 2022
24 Jun 2022
29 Jul 2022
24 Jun 2022
27 Jul 2022
15 Jul 2022
25 Jun 2022 - 4 Jul 2022
60 days
Amount
Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris out side MD land including necessary scaffoldings etc complete all as specified and directed
M&L for rendering 15mm thick in cement mortar (1:6) on surfaces of walls including finishing the surfaces even and smooth (without using extra cement) etc, complete all as specified and directed.
M&L for 15 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm thick and 5 mm thick each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar (1:3) to ceiling and finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
S&F stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tined tacks, or galvanised wire staples complete all as specified and as directed.
M&L applying 3 mm thick wallcare putty on internal surface of wall new/old surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed. .
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper with roller over one coat of primer complete as specified and directed.
M&L for preparation of new surfaces of wall and applying two coats of antifungal exterior paint (of shade/colour as directed by GE ) over one coat of primer all as per manufacturer instruction including necessary scaffoldings etc complete as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturer instruction including necessary scaffoldings etc complete as specified and directed.
M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.
M & L for preparation of old plastered surfaces of ceiling and applying one coats of white wash, complete all as specified and directed.
M & L for preparation of old plastered surfaces of wall and applying two coats of white wash, complete all as specified and directed.
M & L for preparation of new surfaces of wall and applying three coat of white wash, complete all as specified and directed.
Dismantling floor hearth or wall tiling and stone slabs including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed shall be measured seperately.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed shall be measured seperately.
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 20mm thick cement mortor screed bed in cement mortor (1:6) complete all as specified and directed.
M&L 20mm thick granite slabs of any type in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including necessary moulding at edges laid over and including 10mm thick cement mortor screed bed in cement mortor (1:3) complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size,any area of each tiles in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured 600x250x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for vitrified coloured (light shade) Non-skid ceramic tiles 10mm thick (square/ rectangular) of polished size, area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 20mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for vitrified coloured (light shade) Non-skid ceramic tiles 10mm thick (square/ rectangular) of polished size, area of each tile not exceeding 0.36 Sqm in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar screed bed in CM 1:4 etc, complete all as specified and directed.
Taking down chowkats or frames, exc 1.5 sqm but not exc 4 Sqm each with shutters (Without taking off shutters from the frame) and refixing of old shutter in new chowkats complete all as specified and directed.
Taking down chowkats or frames, n.exc 1.5 sqm with shutters (Without taking off shutters from the frame)complete all as specified and directed.
S & F 2nd class hard wood (SAL) plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc Size of frame 105 x 60 mm including providing one shop coat of zinc chrome primer complete all as specified and directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, size of frame 125mm x 60mm including one shop coat of Zinc Chrome primer complete all as specified and as directed
M&L for cement concrete of 1:3:6 Type C-1 using 20 mm graded crushed stone aggregate as filling of pressed steel frame, (lintel, copings, hold fast block etc) complete all as specified and directed.
S & F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering in both faces. The size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood (Hollock/Sal/Kalasiris), complete all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood (Hollock/Sal/Kalasiris), Kiln seasoned and chemically pressure treated, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges, of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc, sizes of members of shutters as specfied in SSR Part I, Section 8, cluase 8.24 (a) ; supplied and fitted to chowkats complete all as specfied and directed.
S&F in replacement 18/19 mm thick pre-laminated particle board exterior grade pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and directed.
S&F in replacement 18/19mm thick block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work as in cup board shutters, kitchen cabinets, shelves etc complete as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as specified.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as specified.
S & F steel ventilators with top hung shutter including hinges,steel peg stay, including one shop coat of Zinc Chrome primer complete all as specified.
S & F steel window or ventilators fixed type with glazing bar complete all as specified.
Supply only aluminium alloy wire cloth of 0.45 mm nominal dia of wire and average width of aperture 1.40 mm , for steel windows and doors complete all as specified and directed.
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F aluminium anodised bow handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised bow handles of 125mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 125mm long, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.
M& L for Hasp and staple, safety type, aluminium anodised 100 mm including bolt to hinge plate and fixed with screws complete as specified and directed.
S & F continuous (Piano) hinges mild steel bright finish or electro galvanised width of flaps when open 30mm complete as specified and directed.
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation old steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation new steel surfaces of any description or not other wise described n.exc 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation new wooden surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation old painted wooden surfaces of any description not other wise described over 10cm width of grith and applying one coat of synthetic enamel paint, design and pattern as approved by Engineer-in-Charge complete all as specified and directed.
Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brickwork built in cement mortar including taking out roots vegetation if any at any position and removal to out side MD land, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 meter mean radius built in CM 1:6 complete all as specified and as directed.
M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 m and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.
M&L 100mm thick cement concrete 1:2:4 (type B-2) (using 40mm graded crushed stone aggregate) as in PCC floor complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise sepcifically provided for complete all as specified and directed.
M&L for cement conrete 1:3:6 (type C-2) (using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.
Taking up or down 15 mm bore steel water tubing and connections including cleaning complete all as specified.
Taking up or down 20 mm bore steel water tubing and connections including cleaning complete all as specified.
Taking up or down 25 mm bore steel water tubing and connections including cleaning complete all as specified.
Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceal water tubing etc and making good complete all as specified.
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaing or re-fixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S&F plain aluminium sheeting, 0.71 mm thickness alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (as in crumple joints) complete all as specified and as directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed
S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, 32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore complete all as specified and directed.
S& F in repair 15 mm bore stop cock/angle cock cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F in repair 15 mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 15 mm bore basin mixture cast copper alloy with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and directed.
S&F in repairs 15mm bore CP fancy type Health faucet with 1.5 meter long tube with CP wall bracket complete all as specified and as directed.
S&F 15 mm bore chromium plated two way bib cock all as secified
S&F in repair of CP brass wall mixture 3 in 1 system with provision for shower with long bend pipes and wall flangs chromium plated swivel joint and matching CP arm complete all as specified and directed
S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S&F in repairs brass chromium plated, shower rose, 125mm size, complete all as specified and directed.
S&F towel rail 600mm long of PTMT (min weight 190 grams) fixed with and incl chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.
S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
S&F in repair sinks with drain board, gloss finish, made of stainless steel 1 mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe also including 40mm bore PVC waste pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair sinks without drain board, gloss finish, made of stainless steel 1 mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe also including 40mm bore PVC waste pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F CP curtain rails 20 mm dia chromium plated, with and including fixing brackets, stops, rollers etc, complete al as specified and directed.
S&F in repair vitreous china squatting pan "ORISSA" pattern of size 580x440mm white with and including 'P' or 'S' trap with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding and connecting up, complete all as specified and directed.
S&F in repairs Vitreous China 1st quality , wash down water closet pan (pedestal pattern), including white seat cover with complete set complete all as specified and as directed
S&F 15 mm bore brass chromium plated, Sink mixture good quality complete all as specified and as directed.
S&F PVC cabinet with mirror Cat No. 551 of make prayag or equivalent as approved by GE complete all as specified and as directed.
S&F in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12cm wide with CP brass bracket guard railing 60cm long complete all as specified.
Supply and fixing CP soap dish complete all as specified.
Supply and fixing CP toilet paper holder complete all as specified.
S&F kitchen plate rack made out of stainless steel 1mm thick sheet with partition and size of rack 800X250X900 mm complete all as specified and directed.
Demolition of reinforced cement concrete roofs floors (other than ground floors), beams, straicases, landings, kitchen platform, chajjas and similar suspended work complete all as specified and directed.
M&L for Reinforced cement concrete typeB0 1:2:4, (12.5mm graded crushed stone aggregate) as in chajja, kitchen platform, kitchen shelves, etc complete all as specified and as directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges Complete all as specified and as directed.
M&L for removing loose , disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, pardi, railling etc, cleaning thoroughly exposed reinforcement by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fixing welded wire mesh of size 100x100 mm of 3 mm dia wire weight not less than 1.37 kg/sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guinting in cement mortar 1:3 minimum thickness 30mm and therefore rendering 10mm thick plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces removing the debris outside MD land including material and labour for necessary scaffolding and safety arrangement for guinting work, complete all as specified and as directed. (Note :- The finish of the surfaces to be matched with the existing surface. WPC shall be measured & paid separately as supply only)
S&F in repair 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Dismantling PVC water tank of capacity Exc 500 and n.exc 1000 Litre complete all as specified and directed
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F Ball brass valves of size 25 mm bore high pressure, the polythene float and fly nut, screwed for iron pipe or brass ferrule etc, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) or tiles from existing roof/ terrace and also removing/ taking down of existing water proofing treatment of any thickness in any position and removing rubbish off the premises complete all as specified and as directed.
M&L for rendering 10mm thick in cement mortar 1:4 on roof surface mixed with water proofing compound @3% by weight of cement , finished even and smooth without using extra cement complete all as specified and as directed. Note- WPC shall be measured and paid separtely
M&L for providing, laying water proofing treatment over plastered surfaces of RCC roof shall be as under:- (a) The dried plastered surface of slab shall be painted with one coat of bituminous primer @0.4 liter/Sqm. (b) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3 kg/sqm of approved manufacturer minimum 3mm thick, reinforced with polyster non woven fabric (weighing not less than 160gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (c) The finished surface shall be given Aluminium paint @ 0.11 Kg/Sqm on APP as per manufacturer's instructions. Make:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / IWL INDIA LIMITED (HYPERPLAS)/M/S Tiki Tar Danosa (India) Pvt Ltd (Hydro Stop)/M/s Supreme Bituchem India Pvt Ltd (Super Shield)
M&L for sunken floor treatment by roughening of sides and bottom of sunken floor by picking,sweeping clean and washing down with water to remove dust etc. and 10mm thick rendering in CM(1:4) on concrete surface (bottom & sides of sunken floor) finished fair and even mixed with liquid water proofing compound 'conplast X 421 IC' mfd by M/S FOSROC chemicals (india) pvt ltd,priming coat of "Nitro proof 100" and after drying of primer applied one coat of 'Nitro proof 120' mfd by M/S FOSROC complete all as specified and directed.
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F Steel rolling shutters of thickness 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type including taking out old unsv rolling shutter and removed from site complete all as specified and directed.
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete as specified.
M&L for preparation of newly primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete as specified and directed.
Re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint complete as specified and directed.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm thick each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for preparation of new plastered surafce wall and applying one coat of primeseal primer of M/s Dr fixit or equivalent chemical of M/s STP Ltd as approved by GE or one coat of chemistic PDE 600 elastomeric coating (and allowing to dry for 8 hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system raincoat of M/s Dr fixit with DFT 100 micrones or shalicry 215 of M/s STP Ltd of chemistic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8 hours before application of next coat) including necessary scaffolding etc complete all as per manufactures instructions and as directed. Note : The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufactures and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.
S&F Anodised aluminum section powder coated in partition / frame for door, shutters, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco). Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing element of these items shall be deemed to be included in quoted rate.
Supply only 4mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
Supply only 5.5mm thick figured glass pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
M&L for brick work with sub class 'B' bricks using straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified.
M& L for Mild steel TMT bars 08 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as above but for stirrups complete all as specified and as directed.
M&L for injecting chemical GLYPHOSPHATE (4% concentration) of 20 ml or till refusal by making cut/injection in the stem of plant of roots at 30mm and spraying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the plant /vegetation complete all as specified and as directed.
M&L for providing Polymer Bonding Agent of Fosroc (NITOBOND-SBR) OR equivalent brand of Dr. Fixit,as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members, lintel,chajja finished with spatula etc. complete all as specified and directed.
M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 40mm in thickness) with prebatched, prepacked,single component ready to use microconcrete from FOSROC (Renderoc RG) or equivalent or Dr fixit as appoved by GE, at any level/height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing, laying, levelling, finishing, curing etc as per manufacturers specifications and all other relevant works, complete all as specified and directed. Note : Reinforcement only shall be measured and paid separately)
Demolition of PCC in ground floors and paving not exc. 15cm thickness (below or above ground level) etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified.
M&L for Continuous brick edging; with width equal to the depth of the brick, laid dry, on edge with fly ash modular bricks complete all as specified and as directed.
M&L for PCC 75 mm thick (1:3:6) type C-2 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.
M&L sand cushioning of 40 mm under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.
M&L for PCC (1:2:4) type B-2 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed
M&L for preparation of new undecorated plaster resurface of walls including pilasters and cornices etc and applying 2 coat of weather coat over a coat of primer complete all as specified and as directed.
S&F in repairs vitreous China EWC white with 'P' or 'S' trap front or back intel any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat botton and cover and hinging device complete all as specified
Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete including fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.
Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.
Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 151 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 151 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 151 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
All as per Item Sl No - 151 here in before but for light point controlled by 2 way switch with 1.5sqmm FRLS wires all as directed
S&F modular switch one way 6 Amps 230 Volts, 1 Module complete all as specified and as directed by Engineer in Charge.
S&F modular bell push switch one way 6 Amps 230 Volts, 1 Module complete all as specified and as directed by Engineer in Charge.
S&F modular switch two way 6 Amps 230 Volts, 1 Module complete all as specified and as directed by Engineer in Charge.
S&F modular switch one way with indicator 16 Amps 230 Volts, 1 Module complete all as specified and as directed by Engineer in Charge.
S&F modular socket 2 in 1, 2/3 pin , 6 Amp complete all as specified and as directed by Engineer in Charge.
S&F modular socket 3 pin , 6-16 Amp combined shuttered complete all as specified and as directed by Engineer in Charge.
S&F modular white cover plate with frame 1 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular white cover plate with frame 2 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular white cover plate with frame 3 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular white cover plate with frame 4 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular white cover plate with frame 6 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular white cover plate with frame 8 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular white cover plate with frame 12 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular metal flush box 1/2 module complete all as specified and as directed.
S&F modular metal flush box 3 module complete all as specified and as directed.
S&F modular metal flush box 4 module complete all as specified and as directed.
S&F modular metal flush box 6/8 module complete all as specified and as directed.
S&F modular metal flush box 12 module complete all as specified and as directed.
S&F ceiling rose, surface bakelite 65mmx 50mm size with three terminals complete all as pecified and as directed.
S & F Bell Ding-Dong AC 230 V Single Pole complete all as specified and as dircted.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting 20 watt with aluminium extruded batten luminaire for 230 volt AC complete all as directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting 9/10 watt 2 feet with aluminium extruded batten luminaire for 230 volt AC complete all as directed.
Taking down ceiling fans/exhaust fan of any size,dismantling blades and removing fan and blades to MES store complete all as specified and directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 mm /1400 mm, 120 Watt complete all as specified and directed.
S&F energy efficient BLDC (26W) ceiling fan 230V, 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
S&F exhaust fan AC, single phase, 230/240 V, of size 300 mm sweep steel/aluminium metal body with louvers including making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.
M&L LED street light of capacity 30 watt in Aluminium PDC housing, with IP66 protection complete all accessories with connection PVC copper wire not exc 5 mtr completed all as specified and directed.
S&F ventilation fan with louvers, single phase, 230/240 V, of size 200 mm sweep polycarbonate body, including making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.
Supply & Fixing TP& N DB 4 way with sheet metal enclouser 415 volts double door 160 Amp rated bus bar for MCB , including cutting chases of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, SPN double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 08 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
S&F MCB TPN 63 Amp 415 Volts breaking capacity 16 KA complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 6-40 Amp ,C curve, complete all as specifie and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 10 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 10 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed.
S&F switch piano, plush type single pole 5 Amp 230 Volt all as specified and as directed.
S & F Bell Push Flush type 5 Amp, 240 volt all as specified.
S&F switch piano, surface type single pole 2 way, 5 Amp 230 Volt all as specified and as directed.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type soil getting out and levelling of bottom surface to required level complete all as specified and directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.
Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35sq mm 3.5 core including making necessery connections all as specified and as directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm bore medium grade for cable protection complete all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25sq mm 3.5 core including making necessery connections all as specified and as directed.
All as per item Sl No 151.00 here in before but for modular fitting
All as per item Sl No 152.00 here in before but for modular fitting
All as per item Sl No 153.00 here in before but for modular fitting
All as per item Sl No 154.00 here in before but for modular fitting
All as per item Sl No 155.00 here in before but for modular fitting
S&F modular electronic step regulator (speed regulation in 5 steps) 1 module suitable for ceiling fan 1200 sweep/1400mm, 120 Watt complete.
ASSOCIATED TRADING CORPORATION
MARWA CONSTRUCTION
M S ALOK SAHA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .