MP Fund retender -2025-2026

Amount

Dismantling RR Masonry in cement motor walls under 3m High

Dismantling Brick work Masonry in cement motor walls under 3m High

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,

Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,l aying,curing etc complete.,

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Rough stone dry Packing for aprons and revetments using rough stone including cost of all materials and labour charges etc,complete as per SS. No: 217.

R.C.C.1:1 1/2:3 mix using 20mm ISS HBG metal including Cost and conveyance and all labour charges for mixing laying finishing and curing etc complete but excluding cost of steel & Centering charges etc., complete as per SS

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Upto Basement (Plain surface)

RCC works

Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.same

Plastering in Cement Mortor 1:5 Mix (one cement, five M.sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Provision for Cupboard Cuddapah slab 40 mm tk inclding supply and fixing etc

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three M.sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Dadooing walls with Glazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supply, fabricating & fixing in position of M.S door of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile the sizeof outer frame 60mm x 58mm and shutter profile size of 60x 78mm both profiles are reinforced with GI/1mm 125GSMand 100% corrosion free, the profile are multi chamberedsections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned

Supply, fabricating & fixing in position of Hand Rail including cost and conveyance of all materials to site etc., complete complying with standard specifications.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 17

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supply and fixing of single box type Compact flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 88 ]

Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125

Supply and fixing of 20W LED Tube Fittings M-1275

Supply and delivery of following PVC / G.I pipes and specials

110mm PVC pipe '4 ksc'

110mm PVC Door Elbow

110mm PVC Tee

110mm PVC Plain Elbow

110x75 mm PVC Reducer

110 mm PVC Cowl

75mm PVC Pipe

75mm PVC Door Elbow

75mm PVC Plain Elbow

32mm PVC Pipe

32 mm PVC Tee

32 mm PVC Elbow

CPVC Tank Connector

32x25 PVC Reducer

25 mm PVC Pipe

25 mm PVC Tee

25 mm PVC Elbow

25 mm G.M Valve

15 mm Long body tap

Stainless steel sink 600x450x200

Supplying & Fixing in position of white glazed Indian type water closet with 'P' (or) 'S' trap and Orissa slope set in brick jelly cement concrete 1:4:8 100mm thick using 20mm thick brick jelly ISS gauge and finished to sludge out any leakage and defalut including cost of WC 'P' (or) 'S' trap and foot rest etc., complete - 1No.

Supply and delivery and fixing of 1000 litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. (TWAD schedule of rate 2024-2025)

1/2 H.P Monoblock motor

Special design art work with first class quality enemal paint including wall putting priming coat extra complete and all other incidential charges if any as per standard specification

Planting of Adenium Specimen plant variety of height 105-120 cm in polythene bag of size 16x16inch including loading and unloading charges, HC-W0138 PD-1726 transportat i on, stacking of saplings at site, earth Eachwork excavation of required size, planting o fsapling, refilling of excavated earth etc asdirected by the site in- charge.PWD II(page no 287)

Supplying and laying Cement Concrete Rubber Moulded Hydraulic Pressed Paver Block M40 grade of 63mm thick high strength type confirming IS 15658-2007 of required size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibrating the pavers, sweeping, transporting loading and unloading of paver block as per the standard specification.

Supply ,collection and filling of M sand from approved quarry including all cost and conveyance to site,stacking them on road side to departmental guage for the take premeasurement. Each layer not more than 15 cm thick and consolidation properly etc complete. TNDSS No : 301& 305

Mild Steel Playground Equipment Revolving Merry Go Round, Size: 5 Feet

Supply and Fixing of 8 ft G.l sheet slide and ladder Required safe play area ( 15*6) Materials: 8 ft slide attached with 02 metal bed for seating and handle is made of 27mm od pipe 33 mm od pipe for ladder comes with painting finish etc….

Supply and Fixing of Double swing with SS chain Required safe play area ( 10*8) Materials:60mm od for top, 48mm od pipe for legs attached 01 with 2 plastic seat and SS chain, bearing bushes for movement comes with enamel painting finish….