Special Repair and Maintenance of Police Residential Quarters (PQ No 13 to 18) and Providing Cycle Shed for Police Quarters at Kavaratti (Re e-Tender)

Amount

Providing and fixing 18mm thick gang saw cut mirror polished(Premoulded and prepolished)machine cut for kitchen platforms,vanity counters,window sills,facias and locations of required size of approved colour and texture laid over 20mm thick cement mortar1:4(1cement,4M.sand with joints treated with white cement,with matching pigment,epoxy touch ups,including rubbing,curing moulding and polishing to edge to give high gloss complete at all levels.Granite of any colour and shade.Area of slab up to 0.50 sqm.

Demolishing cement concrete manualy/by mechanically means including stacking of serviceable materials and disposal of unserviceable materials within 50mtr lead.

Taking out doors of windows and clerestory window shutter(steel or wooden)including stacking within 50mtr lead of area 3sqm and below

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5sqm and under including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50mtr lead.

Providing and laying cement concrete 1: 5:10 ( 1 cement: 5 M.Sand: 10 granite chips ) foundation and plinth.Stone aggregate 40mm nomonal size

Reinforced cement concrete work in beams,suspended floors,roofs,having slope up to 15dgree landings,shelves chajjas,lintels bands,plain window sills,staircase and spiral staircase up to floor five level excluding cost of centering and shuttering finishing and reinforcement with 1:1.5:3(1cement,1.5M.Sand,3G.Chipps)

Centring and shuttering including strutting propping etc,and removal of form for:Suspended floors,roofs,landings,balconies and access platform.

Cold twisted steel reinforcement for RCC work including bending,binding and placing in position complete.

12mm cement plaster 1:6(1cement 6P.Sand)on the out side

Providing and laying Vitrified floor tiles in different sizes(thickness to be specified by the manuafacture)with water absorbtion less than 0.08% and conforming to IS:15622 of approved make in all colours and shade laid on 20mm thick cement mortar 1:4 (i cement : 4 P sand) including grouting the joints with white cement and matching pigments etc.complete.size of tiles 800x800mm including demolishing existing floor tiles wherever required.and also refixing of Door shutters in proper size.

Providing and laying Vitrified in differen size (thickness to be specified by the manuafacture)with water absorbtion less than 0.08% and conforming to IS:15622 of approved make in all colours and shade in skirting,riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement: 3 P sand) including grouting the joints with white cement and matching pigments etc.complete.size of tiles 800x800mm

p/f ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture)of first quality confirming to IS:15622 of approved make,in colours such as white,Ivory,Grey,fume red brown laid on 20mm thick cement mortar 1:4(1cement,4P.Sand) and joining with white cement and making pigment.including demolishing existing floor tiles wherever required.

p/f ceramic glazed wall tiles (thickness to be specified by the manufacture)of first quality confirming to IS:15622 of approved make,in skirting,riser of steps and dado.colours such as white,Ivory,Grey,fume red brown laid on 20mm thick cement mortar 1:4(1cement,4P.Sand) and joining with white cement and making pigment.including demolishing existing floor tiles wherever required.

Finishing wall with texture exterior paint of required shade on new work(two or more coats applied @3.28litr/10sqm)over including priming coat of exterior primer [email protected]/10sqm.including removing white or clour wash by scraping with sand paper or wire brush wherever required.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).32mm nominal bore

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fitting s including trenching and refilling etc. External work (6kg/cm2)110mm dia

(b)63mm dia

P/F white vitrous china water closet pedestal pan(Eauropean type)WC pans with white plastic seat and lid and rubber buffers IS white vitrous china low level flushing system of approved make with fittings and brackets 40mm flush bend 20mm PVC over flow pipe with complete including cutting and making good the walls and floors where required.white EWC pan with plastic seat and lid

Providing and fixing white vitrous china wash basin with RS or CI brackets painted white 15mm CP brass pillar tap and CP brass chain and rubber plug 32mm CP brass waste of standard pattern 32mm diameter and waste pipe complete including cutting and making good the walls where required.Flat back wash basin size 550x400mm with one 15mm CP brass pillar tap.

Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.

Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour 600 mm long towel rail brackets with total length of 645 mm, width 78 mm and effective height of 88 mm ,weighing not less than 190 gms.

P/F CP brass bib cock of approved quality and manufacture complete,15mm nominal bore

P/F CP brass stop cock of approved quality and manufacture complete,15mm nominal bore

Providing and fixing stainless steel A ISI (304 18/8)Kitchen Sink as per IS 13983 with CI Brackets stainless steel plug 40mm including painting of fittings and brackets,cutting and making good the walls where required.Kitchen sink 450mm x400mm bowl depth 250mm

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in- Charge.

Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter)

Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Vitrified tiles.

Providing and fixing PVC Floor tap 110mm dia

Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm

Providing and fixing CP brass Sink cock of approved quality and manufacture complete.20 mm

Providing and fixing C.P. shower rose with 15 to 20mm intlet, 100 mm dia.

Providing and fixing health faucet of approved quality and manufacture complete.

Providing and fixing ball valve ( PVC ) of approved quality and manufacture complete.32 mm nominal bore

Providing and fixing 30mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class karimaruth or equivalent.

Providing and fixing structural posts of support of roof or ceiling/hand rail of approved size by welding etc.to steel ladder railing balcony railing and staircase railing/including applying a priming coat of approved steel primer.G.I.Pipes.IS:1239/IS:3589

Providing and laying cement concrete 1:2:4(1cement,2M.Sand,4G.chipps) foundation and plinth.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: all are G.I.Section (IS:4923)

Providing and Fixing Coloured Traffoled Aluminium sheet roofing fixed with galvanized iron J or L hooks and 8mm dia C.I Plain bitumen washers complete excluding the cost of purlins,rafters and trusses corrugated sheet 0.56mm thick.

Painting steel work with Deluxe Multi surface paint to give an even shade.Two or more coats applied on @0.90litr10sqm) of approved and manufacture.

Abdul Shukoor B