SPECIAL REPAIRS RENOVATION OF SCHOOL BUILDING OF KV AFS AVADI

Amount

BOQ UPLOADED ON 28 JAN 2022

SCH "A" PART-I (CIVIL WORKS)

Taking down chowkats or frames (wooden / steel) with shutters (without taking off shutters from the frames) exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site under Sch of credit complete all as specified and as directed.

Taking down chowkats or frames (wooden / steel) with shutters (without taking off shutters from the frames) not exceeding 1.50 sqm each and removing from site under Sch of credit complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.00 sqm each and removing from site under Sch of credit complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 sqm and not exceeding 2.00 sqm each and removing from site under Sch of credit complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 150mm thickness (below or above ground level) and removal of unserviceable debris outside of MD land complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls, concrete surfaces, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of unserviceable debris to outside of MD land complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of unserviceable debris to outside of MD land complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing the surplus soil outside MD land complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil all as specified and as directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and as directed.

Excavating over areas not exceeding 1.5m depth and getting out in any type of soil all as specified and as directed.

Excavating over areas exceeding 1.5m and not exceeding 3.0m depth and getting out in any type of soil all as specified and as directed.

Excavating in trenches, not exceeding 1.5m wide and exceeding 1.5m and not exceeding 3.0m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified and as directed.

Post Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Hardcore broken stone boulders of guage not exceeding 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

Filling under floors or pavings using earth obtained from excavation including spreading, levelling, watering and ramming in layers not exceeding 25cm each complete all as specified and as directed.

Sand filling in floors or pavings laid in layers not exceeding 15CM thick, spread, levelled and rammed including watering complete all as specified and as directed.

Plain cement concrete, 1:4:8, type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Plain cement concrete, 1:2:4, type B1, using 20mm graded stone aggregate for fixing of posts complete all as specified and as directed.

Plain cement concrete, type B1, 1:2:4, using 20mm graded stone aggregate as in bed blocks, coping, benching and the like including weathering, slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and as directed.

Damp proof course to horizontal or vertical surfaces in PCC 1:2:4, type B0, 25mm thick including necessary formwork complete all as specified and as directed.

RCC in 1:2:4, type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed. Note: Reinforecment shall be measured and paid for seperately

RCC 1:2:4, type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note: Reinforecment shall be measured and paid for seperately

RCC 1:2:4, type B1 using 20mm graded stone aggregate as in chajja, facia and the like complete all as specified and as directed.

Plain cement concrete, 1:3:6, type C2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Plain cement concrete, type C1, 1:3:6, using 20mm graded granite stone aggregate as in bed blocks and the like including weathering, slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and as directed.

Providing precast cement concrete type 1:2:4, type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

Plain cement concrete in 1:3:6, type C2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel exceeding 45 cm and upto 60cm inner girth in cement concrete, using ex tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.

Brick work with fly ash bricks, old size, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 of designation 50 complete all as specifed and as directed.

Brick work with fly ash bricks, old size, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of designation 50 complete all as specifed and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat concrete surfaces complete all as specified and as directed.

Formwork to chullah hoods, chajjas, fins, facia, troughs and similar items including edges for rough finished flat concrete surfaces complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, as in IInd class hardwood complete all as specified and as directed.

Factory made Glazed and skeleton shutters, of IInd class hardwood, 35mm thick open rebated and prepared to receive glass, gauze, etc. divided into sqaures, with plain, chamfered or rounded mitred and rebated sash bars any numbers,edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Flush shutters, 40mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Resecuring the chowkhat or frames not exceeding 1.5 Sqm without taking down complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as per relevant drawing in SSR Part-II complete all as specified and as directed.

Factory made solid PVC moulded door shutter, with wood free EPS core 28mm to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on the back face all as per relevant drawing in SSR Part-II complete all as specified and as directed.

S & F in repairs IInd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed.

Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised, type B-21 of size 100mm complete in repairs all as specified and as directed.

Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised, type C-21 of size 75mm in repairs complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, length of bolt 250mm complete all as specified and as directed.

Extruded aluminium alloy handles,cast type, anodised of size 150mm complete all as specified and as directed.

Extruded aluminium alloy handles,cast type, anodised of size 100mm complete all as specified and as directed.

Aluminium anodised barrel tower bolts, of extruded section and fixed, length of bolt 150mm complete all as specified and as directed.

Aluminium anodised barrel tower bolts, of extruded section and fixed, length of bolt 100mm complete all as specified and as directed.

IInd class hard wood plain fillets square, rectangular or triangular in section exceeding 13 sqcm and not exceeding 25 sqcm, clean sawn, secured with nails or brads complete all as specified and as directed.

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Mild steel as in small articles such as hold fast, wall ties, bands, straps and like conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces., cleats etc., of Fe-410-W (Gde E-250 quality A) complete all as specified and as directed.

Plate girder or single stanchions, section with flange plates, caps, bases. splices, angle brackets, cleats and other connections of Fe-290-W (Gde E-165) complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long and dia of bolt 16 to 20mm complete all as specified and as directed.

Mild steel TMT bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed.

Mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed.

Mild steel TMT bars but 5mm dia and over upto and including 10mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers & binders complete all as specified and as directed.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

All as per item No 65.00 here-in-before but fabrication, erection and fixing only Note:- The steel sections obtained from item No 8 shall be reused.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Welded steel wire fabric of weight not exceeding 4Kg per sqm and fixed to steel members complete all as specified and as directed.

Plain cement concrete 50mm thick, 1:2:4, type B1, using 20mm graded stone aggregate as in flooring and surface finished even and smooth complete all as specified and as directed.

Plain cement concrete 75mm thick, 1:4:8, type D2, using 40mm graded stone aggregate as in sub base surface finished fair and even complete all as specified and as directed.

Plain cement concrete 75mm thick, 1:3:6, type C1, using 20mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified and as directed.

Glass dividing strips, 3mm thick, width 38mm inserted in position, conform to design complete all as specified and as directed.

Plain cement concrete100mm thick, 1:4:8, type D2, using 40mm graded stone aggregate as in sub base surface finished fair and even complete all as specified and as directed.

Plain cement concrete 25mm thick, type B0, 1:2:4, using 12.5mm graded stone aggregate,surface finished even and smooth without using extra cement as in floor complete all as specified and as directed.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

Spreading and levelling sand below interlocking paver block paving as cushioning, complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25mm thick laid over 20mm thick cement screed base in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick cement plaster in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 square metre in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / square metre complete all as specified and as directed.

Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, in verticle surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 1:3, 10mm thick applied with cement slurry at the rate of 3 kg / square metre complete all as specified and as directed. Note: size of tile as directed by the Engineer-in-charge

Glazed ceramic tiles of grade B-III coloured of size 350mm x 250mm / 450mm x 350mm, minimum 7mm thick in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.

Rendering 15mm thick in CM(1:6) on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5mm thick in CM(1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10mm thick in CM(1:6) with a top coat of rendering 5mm thick in CM(1:4) mixed with water proofing compound on fair faces of brickwork or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

Rendering 15mm thick in CM(1:4) on fair faces of brickwork or concrete surfaces using water proofing compound finished smooth and even complete all as specified and as directed. Note: water proofing compound shall be measured and paid for seperately.

Supply only Water proofing compound all as specified and as directed.

Preparing newly plastered surfaces of wall,, applying two coats of cement paint over a coat of primer to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed

Preparing new surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying three coats of white wash including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing old plastered surfaces of wall and applying one coat of white wash including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing old plastered surfaces of wall and applying two coat of white wash including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing old plastered surfaces of ceiling and applying one coat of white wash including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing newly plastered surfaces of wall,, applying two coats of oil emulsion distemper over a coat of primer to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed

Preparing old plastered surfaces of walls and applying one coat of colour wash including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparation of old wall surfaces and applying one coat of distemper oil emulsion white or tinted including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed

Complete removal of existing treatment from wall surfaces, applying two coats of distemper oil emulsion white or tinted including in narrow widths, bands, cornices, pilasters etc., over a coat of alkali resistant priming paint complete all as specified and as directed

Preparing old surfaces of wall and applying one coat of cement paint to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed

Preparing existing external surfaces of wall and applying one coat of weather proof paint to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparing old painted surfaces of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparing old painted surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

Preparing new surfaces of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Sheet glass, 4mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) , three layered hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres in repairs complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site under Sch of credit and provision of steel tubing, galvanised, medium grade, with all fittings such as bends, elbows, tees etc., and fixed complete to walls and ceilings or laid in floors of bore of pipe 15mm complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site under Sch of credit and provision steel tubing, galvanised, medium grade, with all fittings such as bends, elbows, tees etc., and fixed complete to walls and ceilings or laid in floors of bore of pipe 20mm complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site under Sch of credit and provision steel tubing, galvanised, medium grade, with all fittings such as bends, elbows, tees etc., and fixed complete to walls and ceilings or laid in floors of bore of pipe 25mm complete all as specified and as directed.

Bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed both ends for iron pipe or for brass ferrule and fixed of bore of pipe 15mm complete all as specified and as directed. Make: Prayag Cat No Neptune Series PIS-06

All as per item No 108 above but in repairs

Stop valves, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and as directed. Make: Prayag Cat No Neptune Series PIS-10

All as per item No 110 above but in repairs

Stop valves, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 20mm complete all as specified and as directed.

All as per item No 112 above but in repairs

Ball brass valves, high pressure, with polythene float and flynut complete, screwed both ends for iron pipe or brass ferrule and fixed, of bore of pipe 20mm in repairs complete all as specified and as directed.

Supply only PVC valveless, syphonic action type flushing cistern 10 litres capacity low level, white with inlet, ball valve, float and handle / push button, including brackets as in repairs complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed complete all as specified and as directed. Note: Flushing cistern, flush pipe, seat cover, P trap, WC connector, as required shall be measured and paid for under supply only separately.

All as per item No 116 above but in repairs

Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe complete all as specified and as directed. Note: (a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. (b) Supply and fix of waste pipes as required shall be measured and paid for separately.

All as per item No 118 above but in repairs

Supply only pillar taps, swan neck with flange, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of bore of pipe 15mm as in repairs complete all as specified and as directed. Make: Prayag Cat No Neptune Series PIS-02

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

LDPE pipes, 32mm bore of pipe, of pressure rating 6 kgf/sqcm with polyethylene thread union and check nuts, fixed to walls as in waste pipe complete all as specified and as directed.

Grating square 150 mm size of PTMT (Minimum weight 100gms)complete all as specified and as directed.

Bib tap, two way, brass, chromium plated, screwed for iron pipe. bore of pipe 15mm as in repairs complete all as specified and as directed.

Health faucet, chromium plated, 2 in 1, suitable for 15mm bore of pipe with CP pipe length 1500mm, wall hook, water shower gun, washers, connections, brass union etc., complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) , three layered hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres complete all as specified and as directed.

Steel tubing, galvanised, medium grade, with all fittings such as bends, elbows, tees etc., and fixed complete to walls and ceilings or laid in floors of bore of pipe 15mm complete all as specified and as directed.

Steel tubing, galvanised, medium grade, with all fittings such as bends, elbows, tees etc., and fixed complete to walls and ceilings or laid in floors of bore of pipe 20mm complete all as specified and as directed.

Steel tubing, galvanised, medium grade, with all fittings such as bends, elbows, tees etc., and fixed complete to walls and ceilings or laid in floors of bore of pipe 25mm complete all as specified and as directed.

Ball brass valves, high pressure, with polythene float and flynut complete, screwed both ends for iron pipe or brass ferrule and fixed, of bore of pipe 20mm complete all as specified and as directed.

Supply only PVC valveless, syphonic action type flushing cistern 10 litres capacity low level, white with inlet, ball valve, float and handle / push button, including brackets complete all as specified and as directed.

Supply only pillar taps, swan neck with flange, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of bore of pipe 15mm as complete all as specified and as directed.

Bib tap, two way, brass, chromium plated, screwed for iron pipe. bore of pipe 15mm complete all as specified and as directed.

Toilet paper holder brass, chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed. Make : Prayag Cat No BA 88 or equivalent makes listed here-in-after.

Asbestos cement pipe of 100mm dia in any legth with cement joint as in septic tank vent pipe complete all as specified and as directed.

Asbestos cement cone cap cowl of 100mm sizefor septic tank vent pipe complete all as specified and as directed.

Broken brick aggregate for loose filling, of gauge 80 mm to 150 mm graded as in soak pit/soak well complete all as specified and as directed.

Concrete bed to RCC drain pipes in plain cement concrete 1:3:6, type C2, using 40mm grade stone aggregate including necessary formwork including packing under, and haunching against the sides of pipes after securing the joints with suitable RCC collar for bore of pipe of 150mm after they are laid and tested all as specified and as directed.

Reinforced concrete pipes, class NP2, laid and jointed complete with collars of bore of pipe 150mm laid in trenches complete all as specified and as directed.

SCH "A" PART-II (INTERNAL ELECTRIFICATION)

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, etc., and separating the serviceable items for reuse, removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated 1100 volts grade FRLSH unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 25 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., including taking down the existing unserviceable point wiring complete all as specified and as directed for one light point controlled by one switch.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per BOQ SL No.144 here-in-before but for one exhaust fan/wall mounting fan point controlled by one switch.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per BOQ SL No.144 here-in-before but for one ceiling fan point controlled by one switch and regulator

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per BOQ SL No.144 here-in-before but for one bell/buzzer point controlled by one bell push

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per BOQ SL No.144 here-in-before but for One switch socket outlet point 3 pin 5 Amps on same board with other switches.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per BOQ SL No.144 here-in-before but for One switch socket outlet point 3 pin 5 Amps on independent board.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

All as per BOQ SL No.144 here-in-before but for point wiring with two 4 sqmm single core copper conductor multistranded cable and one 4 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board complete all as specified and as directed.

Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

Ceiling rose, 3 terminal, PVC / polycarbonate, insulated body complete as specified and as directed.

Bell push, flush type single pole, one way, 5 Amps complete all as specified and as directed.

Switch piano, flush type single pole, one way, 5 Amps complete all as specified and as directed.

Switch socket combination, flush type, 2 in 1, 3 pin, 5 Amps universal type complete all as specified and as directed.

Switch socket combination, flush type, 2 in 1, 3 pin, 5 Amps and 15 Amps universal type complete all as specified and as directed.

Stepped type electronic fan regulator, 300 W, flush type, fixed on existing laminated sheet complete as specified and as directed.

MCB 5-40 Amps, SP, 230 Volts, 50 Hz, AC supply, "B" curve, with breaking capacity of 10 kA complete all as specified and as directed.

MCB 40 Amps, SPN, 230 Volts, 50 Hz, AC supply, "B" curve, with breaking capacity of 10 kA complete all as specified and as directed.

Bell, ding dong type, AC, 230 Volts, single pole complete all as specified and as directed.

LED batten fitting 20 W, 230 V, extruded aluminium housing provided for easy heat dissipation wall mounted complete pre wired and including tube and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting with the following parameters,complete all as specified and as directed.

(a) Make shall be Havells Cat No. LUMILINEPLUSBS20WLED865SPCSS/C & S Nakshatra/20W Cat No LTTB4F20WLED/W/ Crompton Cat No BRIGHT LINEA CCS-100-20-65-HL2-DP-NWH.

(b) For all other mandatory requirements of LED fittings, please refer Particular Specifications given here-in-after.

LED building security light fitting 25W made up of pressure die cast housing toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 complete, prewired and connecting up with suitable twin core copper wire including provision of necessary GI bracket light grade 25mm bore of pipe 1.5 m long bent to shape required with necessary clamps including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

(a) Make shall be C & S Cat No. indus-i/25W Cat No LTESS25WLED/LS or equivalent of makes as listed here-in-after.

(b) For all other mandatory requirements of LED fittings, please refer Particular Specifications given here-in-after.

Power / Sub-main wiring with PVC insulated unsheathed, 1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmm FRLSH conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistranded copper conductor cable FRLSH (green) as earth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting to common earth dolly including taking down existing unserviceable sub main wiring complete all as specified and as directed.

(a) Two runs of 6 sqmm cable and one run of 6 sqmm cable and one run of conduit will be measured as one length.

(b) Cutting chases on walls for concealing pipes and cost of terminal box is deemed to be included in the item rates quoted for sub-main wiring / circuit wiring.

Taking down MCB DB including inner components and provision of MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed.

Loadline MCB DB TPN 4 way, verticle, double door, powder coated, 415 Volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for fixing MCCB 100 Amps 4 pole as incomer and SP MCBs 40/63 Amps as outgoing with tinned copper bar, neutral link, earth link and connecting up complete all as specified and as directed. Make: Havells Cat No DHDLVDRWGOF004 or or equivalent makes listed here-in-after Note: Incoming MCCB and outgoing MCBs shall be measured and paid seperately.

MCCB 100 Amps, 4 pole, 415 Volts, 3 phase, 50 Hz, 16 kA breaking capacity, with fixed thermal and fixed magnetic setting with protection for overload and short circuit and conforming to IEC60947 / IS 13947 (Pt-II) 1993 (Latest version) complete all as specified and as directed.

Taking down unserviceable ceiling fan and refixing in position duly rectified the defects, renewal of ball bearing, oiling/greasing including winding with the suter enamelled copper winding wire and testing for proper functioning including one coat of painting and writing MES No complete all as directed.

Taking down unserviceable exhaust fan and refixing in position duly rectified the defects, renewal of ball bearing, oiling/greasing including winding with the suter enamelled copper winding wire and testing for proper functioning including one coat of painting and writing MES No complete all as directed.

Galvanised steel wire 4mm dia in earth continuity conductor or main earthing lead fixed all as directed

Taking out existing earthing materials and provision of Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.

Common burnt bricks sub class "B" of old size, designation 50, laid dry in trenches with width equal to length of bricks across the cable for cable protection complete all as specified and as directed.

Fine sieved excavated dry soil laid to required width of trench at bottom and top of cable as in cushioning complete all as specified and as directed. Note: (i) Punned thickness only shall be measured (ii) The soil used shall be free from sharp grains and deletrios materials like dry/decayed plants etc.,

Provision of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 16 sqmm, 4 core,1100 volts grade, in trenches / drawn through pipe / fixed on walls / bare in road crossings / paths / drains / ducts / floors / fixed on poles / equipments including taking down the existing unserviceable cable complete all as specified and as directed.

Provision of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 25 sqmm, 4 core,1100 volts grade, in trenches / drawn through pipe / fixed on walls / bare in road crossings / paths / drains / ducts / floors / fixed on poles / equipments including taking down the existing unserviceable cable complete all as specified and as directed.

Provision of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 35 sqmm, 3.5 core,1100 volts grade, in trenches / drawn through pipe / fixed on walls / bare in road crossings / paths / drains / ducts / floors / fixed on poles / equipments including taking down the existing unserviceable cable complete all as specified and as directed. Note for item No 172.00 to 174.00:- (a) Lugs and glands shall be used appropriately wherever required while connecting cables to the panel board and the quoted rates are deemed be include for the same. (b) Earthwork, sand cushioning, protection for cable etc., as required shall be measured and paid separately.

Taking up and down steel tubing and connections and taken on credit and provision of Steel tubing, galvanised, light grade, with necessary fittings such as bends, elbows, tees etc., and laid in bridges / culvert / trenches / under roads / crossings etc., of bore of pipe 40mm for cable protection complete all as specified and as directed. Note:- Earthwork as required shall be measured and paid separately.

LED street light fitting, 230 V, AC, 45W outdoor type, CCT not less than 6000K high pressure die cast aluminium housing, heat resistance toughened glass with frame IP 65/66 protection, LED lumen efficacy not less than 120 lumen/watt, reflector lenses for uniform light distribution on each LED with driver, lamp bracket and corrosion resistant including thermal management in multiple optics complete including fixed on new bracket made out of GI pipe light grade 40mm bore of 1.5m long with necessary clamps, bolts & nuts including taking down the exising unserviceable ligt fitting complete all as specified and as directed. Make C & S Cat No LTESS45WLED/LS or equivalent of makes as listed here-in-after

Steel tubular swaged poles complete with mild steel base plate, finial taper plug, bolts, nuts and screws as specified, type 410, SP-31 (9.00 metres long) and shall be coated with two coats of black bituminous paint throughout internally, and externally up to the planting depth and the remaining, portion of the exterior shall be painted with one coat of red oxide zinc chrome primer as in repairs complete all as specified and as directed. Note:- Earthwork, PCC foundation, coping etc as required for erection of pole shall be measured and paid separately.

PVC insulated 1100 volt graded heavy duty cable, PVC sheathed, fire resistance, round, copper conductor 3 core industrial cable of size 1.5 sqmm including taking down the exisiting unserviceable cable complete all as specified and as directed.

Design, fabricate, install, connect, test and commissioning LT electrical feeder pillar panel board, Ac, 3 phase, 4 wire, 415/500 V, 50 Hz, outdoor weather proof type fabricated with 3mm thick mild steel sheet and suitable size steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arragements, chamber for cable entry and exit, chamber for aluminium bus bars, seperate compartment for each switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable size angle iron/flat iron frame work/supports, exccavation and earth work, PCC foundation etc., as required with and including following swith gear items internally connected with suitablke capacity aluminium strip/rod insulated complete mounted on PCC pillars including taking down exisiting unserviceable pillar box all as specified and as directed:-

(a) MCCB 200 Amps, 4 pole, 415 V, 25KA adjustable thermal and fixed magnetic type setting - 1 No (b) MCCB 63 Amps, 4 pole, 415 V, 25 KA adjustable thermal and fixed magnetic type setting - 4 No (c) 4 Nos of equal size aluminium conductor with PVC coloured heat shrinkable type sleeves continuos rating 200 Amps mounted on fibre reinforcement insulator (1 Set) with LED indication lamps Red, Yellow and blue colour (3 Nos) on incoming side. (d) Power contactor 3 pole 20 Amps - 1 No (e) Multi functional meter with CT & PTs class 1 96x96 3 phase - 1 No

Note No 1 : All swich gears and timers are panel mounted without enclosures main switches with HRC fuses

Sheet Moulded Compound (SMC) box, pole mounted, weather proof type with hinged type door off white color of size 250x250x155mm comprising of 1 No MCB 5A and 1 No neutral link and 4 Nos aluminium bus bar of suitable size mounted on suitable insulator complete fixed on pole with suitable clamps, bolts and nuts including taking down existing unserviceable box complete all as specified and as directed.

Removing of old earthing materials and taken on credit and provision of new earthing complete with galvanised iron earth plate electrode 600mm X 600mm X minimum 6mm thick, with and including earthing of 32mm x 6mm GI strip protected by 40mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.

Mariammal Constructions

M/s Omm Muruga Enterprises

PSM ENGINEERS

PRAGATHI BUILDERS