(1) Replacement of Old exchanges with IP based EAPBX exchanges at ART's in Jabalpur, New Kanti Junction & Satna of Jabalpur division. (2) Extension of existing Integrated sickline of Rewa shed by 48 meters of Jabalpur division.

01-Schedule 'A' Supply and Installation (Replacement of Old exchanges

Supply and Installation of EAPBX system easy to Carry IP Based Intercom System with 65 Analog Ext, 48 Wireless IP Extension, 8 CO Trunk and 1 PRI as per the Specification attached. Inspection by RITES.

Supply and Installation of IP Based out door wireless base Station/access point suitable for min 250 hand set for above intercom also working for data broadcast as per the specification attached. Inspection by Consignee.

Supply and Configuration of Hand Held Wireless IP-Phone for ART suitable for above exchange as per specification attached. Inspection by Consignee.

Supply and installation of 24V/80AH Battery Bank along with Easy to Carry FCBC charger suitable of 24V/16A as per the specification attached. Inspection by Consignee.

Supply of CAT6 UTP cable 4 pair in box of 1000 feet. it should be compliant with latest EIA/TIA-568-B.2-1 standard Make: Dlink/Tyco /Systimax or equivalent. Inspection by Consignee.

Supply of 5 pair twisted conductor PVC indoor cable (0.5 mm) dia annealed copper conforming to TEC spec no GR-WIR- 06/03 March 02 or latest Make- Finolex/RR Kabel/ L&T or equivalent. Inspection by consignee.

Supply of switch board cable 0.5 mm/10 pair conforming to TEC spec No. GR/ WIR- 06/03. MAR 2002 or latest Make: Finolex/Bhansali / Delton or equivalent make. Inspection by consignee.

Supply of analog handsfree phone with CLI facility. Inspection by Consignee.

Supply of Cable (D-8 wire) conductor composite conductor of 4 tinned copper and 3 Galvanized high tensile wire (to give strength) of at least size of 0.29 mm dia . wire insulation HDPE insulation of 2.35mm dia twisting having 150mm patch. Inspection by Consignee.

Supply of dual sim fixed wireless telephone (FCT phone) supporting 4 G/3G /2G 10 network SIM with Volte feature , battery and extendable battery charger with 230 VAC input and 3.8 V DC output. Similar to Lexstar model-LX-4 G -2volte make beetel or lexstar or matrix only. Inspection by Consignee.

02-Schedule 'B' Supply and Execution (Extension of existing Integrated

Supply & installation of Rack Mounted Fibre Management System 19'' for 24 fibre (fully loaded) FMS with SC type adapters. INSPECTION BY CONSIGNEE.

Supply of OFC patch cord Type LC-SC or SC-SC (as per site requirement) Length 10 Mtrs of reputed make. INSPECTION BY CONSIGNEE.

Supply of UTP indoor cable CAT6 , to support 10/100/1000Mbps .The category 6 cable 03 should consists of 4 pair of solid insulated copper 23 AWG(0.57mm) pairs separated with a centralslit film, insulation -polyethylene Make:D-link/Syrotech/Digisol or equivalent. [Inspection by Consignee]

Supply & fixing of concealed modular composite box of 04 port 110-style front, inner surface plate, duly fitted with 01 nos. RJ-11 telephone jack & 02 nos. RJ45 jack. INSPECTION BY CONSIGNEE.

Supply & Installation of 19" mount equipment Racks 9 U for housing telecom 05 equipment with hinge door cooling fan, 5 Socket power extension board, cabIe manager, partition tray and accessories with locking arrangement on both door and wall mount arrangement. Make- Comrack, RitteI,APW, HCL, D-LINK. (Inspection Authority: Consignee)

Supply of CAT6 UTP Patch chord 2 meter length. INSPECTION BY CONSIGNEE.

Supply of CAT6 UTP Patch chord 3 meter length. INSPECTION BY CONSIGNEE.

Supply of L2 Manageable non-POE 24 port switch with minimum 02 SFP ports as per specifications attached. Make- CISCO/HPE/Juniper or equivalent. INSPECTION BY CONSIGNEE.

Supply of Analog push button telephone phone with CLI facility. Make-Beetle/BPL or similar. INSPECTION BY CONSIGNEE.

Supply of RJ 45 connector of reputed make. INSPECTION BY CONSIGNEE.

Supply of wireless wi-fi router. Make /Model:TP-Link Archer AC1200 Archer C6 or similar. INSPECTION BY CONSIGNEE.

Excavation of trench asper cable route plan, 1.2mtr deep, 300mm wide at the bottom along main line in normal soil, This work includes covering of cable laid intrenches by loose soil for a layer of 50 mm thickness approximately before covering by shahabad stone/bricks, clearing of route, bushes etc and refilling of the trench by excavated soil and ramming after laying of the required quantity of cables as per instructions of Engineer at site. If it is not possible to reach the required depth at any location, then the contractor shall obtain prior approval of Engineer-in-charge before commencement of cable laying process and only then shall the proportionate payment be made to the contractor.

Excavation of trench asper cable route plan, 1mtr deep, 300mm wide at the bottom along main line in hard soil /murum, This work includes covering of cable laid in trenches by loose soil for a layer of50 mm thickness approximately before covering by Shahabad stone/bricks, 13 clearing of route, bushes etc and refilling of the trench by excavated soil and ramming after laying of the required quantity of cables as per instructions of Engineer at site. If itis not possible to reach the required depth at any location, then the contractor shall obtain prior approval of Engineer-in- charge before commencement of cable laying process and only then shall the proportionate payment be made to the contractor.

Horizontal boring by machine under railway track/road for laying 120mm dia, HDPE pipes at the depth of minimum 2.1 meter form formation level (Level of earth below ballast) as per drawing and directed by engineer-in- charge by trenchless technology.

Laying of S&T Cables of various cores/ pairs/quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings& road crossings. Item 15 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P. (Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. This includes transportation of cable to site from depot.

Transportation and Laying of HDPE pipe as per approved cable route plan in the 16 excavated trench, taking due care while transporting and laying the same in the trenches or other protective works. Both the ends of the duct should be sealed with end plugs before laying and should remain sealed till blowing is done.

Blowing and drawing of OFC through already buried HDPE duct, taking due care while transporting and sealing both the ends after blowing. The cable should be blown according to the technical instructions of the manufacturer and the instructions of the site in-charge.

Supply & fixing of metal DP box 50 pair with locking arrangement fitted with krone module of reputed make. SUPPLY ITEM INSPECTION BY CONSIGNEE.

Supply and fixing of different size PVC casing and Caping/Pipe in Grey, Cream or 19 white colour conforming to IS standard as required by Railways at different sizes 25x25mm/32mmx16mm/45x45mm or as per the instruction of site engineer. By fixing/clamping at a regular interval to the wall for indoor wiring Make: Sudhaker/Modi/Sun or better. SUPPLY ITEM INSPECTION BY CONSIGNEE.