PROVISION OF BATHROOM AND TOILET AT BASE CAMP UNDER GE 873 EWS

Amount

Surface dresssing nexc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep getting out as in Hard/dense soil, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/densc soil complete all as specified and directed.

Returing, filling in incl spreading, levelling watering and well remming in layers not exc 25cm, Complete all as specified and directed.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point Completed all as specified and diercted.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specifeid and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded stone aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded stone aggregates) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded stone aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded stone aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for steel TMT bars, 10 mm dia and over , cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto all as per item no. 12.00 here-in-before but 6mm dia and over upto 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finish complete all as specified and directed.

M&L for formwork to soffits of flat surface suspended slabs such as roof slabs,floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finish surface complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunch-ings, lintels, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm widecomplete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks (1:3:6), Type C-1 (using 20mm graded stone aggregate) exc 10cm thick setting in mortar (1:6), in walls complete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks (1:3:6), Type C-1 (using 20mm graded stone aggregate) 10cm in width and setting in mortar (1:4), in walls complete all as specified and directed.

M& for providing cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), 75 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 and 3 parts of sand (all by weight) complete all as specified and directed.

M&Lfor 15mm thick rendering on fair faces of bick work or concrete surfaces in cement mortar 1:4, finsihed the surfaces even and fair complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering on concrete surfaces in cement mortar 1:3, as in ceiling, finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparing of new surface of plaster and applying three coats of white wash on wall complete all as specified and directed.

M&L for prepartion of newly plastered wall surfaces of any description applying two coat of cement base paint complete all as specified and directed.

M&L for preparing of new surface of plaster and applying three coats of white wash on ceiling complete all as specified and directed.

M&Lfor 15mm thick rendering on roof top/fair faces of concrete work surfaces in cement mortar 1:4, finsihed the surfaces even and smooth using extra cement including mixing of water proofing admixure as per manufacturer instructions all as specified and directed.

M&L for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M&L for 75mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregates as in sub-base complete all as specified and directed.

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in sub-base/under flooring complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.11 Sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer of cement mortar 1:4, and pointed in white or coloured cement to match complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 300x 200x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick to receive the tile in cm 1:3 complete all as specified and directed.

Blank

M&L for Chequered cement concrete tile 30cmx30cmx25mm thick with grey pigment cement and pigment, set and jointed over and including 20 mm screed bed in cement mortar 1:4 and pointed in neat cement slurry in floor complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply & fixing factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing.

S&F plain, solid, straight chowkats of second class hard wood and frames, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panelsof 9mm thick BWP commercial; ply or 12mm thick veneered p article boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated complete all as specified and directed.

S&F 30mm thick 2nd class Hardwood glazed and skeleton shutters, open rebated and prepare to receive glass fitted with cut and mitred beads for secuing glass for ventilators complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F for 100mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed

S&F 100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beeding in square n. exc 0.5 sqm each panes complete all as specified and directed.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F vitreous China squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specifeid and directed.

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifeid and directed.

S&F wash down water closet (Pedestal Pattern) (excluding flushing cistern and flush pipe) white including connection to drain and to flushing pipe, antisyphonage pipe etc, flush pipes of size 630 x 450 mm with integral foot rest to pedestal pan, including all joints, complete assembled all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltrs complete all as specified and directed.

S&F PVC connection of 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F 15mm outer diameter 3-layer PP-R polypylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. all as specified and directed.

S&F 25mm outer diameter 3-layer PP-R polypylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. all as specified and directed.

S&F 15 mm bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm pillar taps, cast copper alloy, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F stop/angle cock 15mm bore, fancy type cast copper alloy chromium plated, screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 25mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)complete all as specified and directed.

S&F chromium plated shower roses 125mm size, fancy type with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F puff water tank 1000 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets & incl waste fitting PTMT (half or full threaded) excluding taps, waste pipe, chain anf plug and porcelain stopper complete all as specified and directed.

S&F of 32 mm PVC waste pipe for WHB complete all as specified and directed.

M&L of 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 75mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 110mm dia mtr bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) bend any redius complete all as specified and directed.

S&F 110 mm PVC (SWR) junction (single T) equal or unequal complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed.

S&F 15mm bore Push tap, high pressure of CP, fancy type for urinal screwed for iron pipe and fixed complete all as specified and directed.

M&L for RCC Septic tanks Designed to carry sewage and sludge water excavation in hard/dense soil, foundation In PCC 1:4:8, RCC M-30 design mix in walls base slab, baffle walls and brick work in CM 1:4, RCC Slab covers including RCC precast Manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 50 users as per drawing No CELZ/TD/ST-3009 sheet (1/4 to 4/4) dated 22 Dec 2022.

M&L for soak well (3.0 m dia x 3m effective depth)excavation in hard/dense soil, PCC 1:3:6 type C2in foundation, honey combed and stone work in CM 1:4, RCC Slab covers including RCC precast Manhole cover as per drawing No CESZ/TD-1078/2011 sheet 1/1 dated 01 Dec 2011.

M&L for plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore NP-3 Pipe complete all as specified and directed.

M&L for RCC NP3 150 mm diameter Pipes laid in trenches on concrete bed and jointed complete with collars all as directed. (Note: Excavation, earthwork , concrete bed shall be measured and paid seperately)

M&L Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:6 complete all as specified.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

(a) One light point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 Amps, flush type (multipurpose). Complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing Rechargeable LED Bulb energy saver 9 W, B22(220-240 V) 50 hz, 6500k fast charging 2200mAH battery including, white color all as specified and as directed. Make:- CG/Phillips/Havells

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x10W bulkhead, 220 Volts and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F MCB DB sheet enclosure, Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing MCB SPN 240V, 10KA 'C' curve 40-63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

Exhaust fan with louvers of size 250mm sweep, 1200 RPM, 230 volts (single phase) plastic type complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed

S&F GI bracket for street light of 32mm bore GI pipe (medium grade of length 1.5 meter), bend to shape including providing2x pairs of MS flat iron clamp (of suitable size, made out of 40mm x 5mm mild steel flat) with nuts, bolts and washer of suitable size, including applying two coat of red oxide primerand one coat of aluminium paint complete all as specified and directed.

Supply and fixing LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.

Supply, laying, fixing, passing through pipe or laid in trenches and testing underground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 2 core 16 sqmm all as specified and directed.

M&L for sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed. Note : Punned thickness of 18cms shall be measured for payment.

M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.

Supply, install in repair, testing commissioning of feeder pillar board kiosk type LT 415 Volt, 50Hz, 3Phase, 4Wire, supply floor mounted, factory assembled, out door type weather and vermin proof, protevtion class IP-54 made out of 40x40x6mm angle iron frame and 3.15mm thick mild steel sheet CRCA with front hinged opening, rubber lining , locking arrangement , powder coated external and internal after seven tank treatment RAL-7035 (structure finish) for structure, covers and doors RAL 2000 (smooth finish) for MS plate RAL-9000 (smooth finish) for plinyh and lifting channel , fully compartmentalized design bus bar chamber comprising 4 Nos. aluminium strip bus bar air insulated and PVC sheathed capacity 400 Amps with clour coding complete all as specified and directed.

Supply and laying/fixing, GI pipe medium grade 40 mm bore (dia)including all type fittings fixed on walls/to poles with clamps /laid in trenches as cable protection all as specified and directed.

M&L for Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

MEHDI ALI (BID ID -3099137)

M/S GHULAM HAIDER (BID ID -3100840)

M/S MOHD MUSSA (BID ID -3098759)