Tindivanam DRO Electrical Works

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point. (for electronic regulator) ( 5 points / Coil) Lower End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point. (for electronic regulator) ( 6 points / Coil) Lower End

Supply and fixing of fancy glass shade and 7W / 9W LED bulb.

Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting.

Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Lower End) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube.

Supply and fixing of Twin box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with double side connection ( Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Supply and fixing of IP65 post top LED fitting on existing gate light pillar and at the bottom of the pillar supply and fixing of MS box of 30cm x 20cm x 10cm with angle iron frame work with door and lock and key arrangements and supply and fixing of 1no 6A SP MCB inside the MS box with PVC unsheathed leads and painting of suitable color.

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 36 W 2' x 2' Surface Mounting luminaire with high brightness LED fitting (Havells / Equivalent ) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of Crafted from Aluminum Die Cast with Four-Directional Beam. Its integrated LED ensures long-lasting and energy - efficient with IP65 Protected. 4 W BRILLANTE ROUND WALL WASHER LED fitting (Havells / Equivalent ) on wall with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 3 nos. 6A two module 3 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no. 6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection. (For AC Plug)

Supply and fixing of 40 A Rotary switch with 3 Nos Indicator combined with switch in suitable sheet steel encloser on wall with earth connection only.

Supply and fixing of 16Amps P + E industrial Socket in sheet enclosure with 16A DP MCB in flush with wall with earth connection. (Legrand / Hager make)

Supply and fixing of 32A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. The FP MCB & Enclosure should be of Legrand / Hager make

Supply and fixing of 63A FP MCB in suitable FP sheet enclosure in flush with wall and making good of the concealed portion with earth connection. The MCB Isolator & Enclosure should be of Legrand (MDS)/Hager (L&T) make.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63A 4P MCB as incoming and 18 Nos 6A to 32A SP MCB as outgoing in flush with wall with Earth connection only. Higher End

Supply and fixing of Vertical type 4 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 100 A FP MCB as incoming and 2 No's 63 A TP MCB and 6 Nos. of 6A to 32A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only.

Supply and fixing of Vertical type 8 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 250 A FP MCCB as incoming and 4 No's 100 A TP MCB, 2 No 63 A TPMCB and 6 Nos. of 6A to 32A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection by 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 10 sq.mm copper wire and making good of the concealed position.

Supply and Run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire and making good of the concealed portion.

Supply and Laying of 3 1/2 x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3-1/2 x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and fixing of dust and vermin proof cubical type 250A Capacity 3 Chamber LTCT meter Panel of size 3ft. Length X 4ft. Height X 1ft. Depth made of 16SWG sheet steel with door with rubber beading, with lock and bolt with sealing hole arrangements with angle iron support comprising of five compartments one for 3 phase energy meter with base plate with view glass, one for bus bar arrangements with 3nos 32 x 6 mm insulated tinned Cu bus bar for 3 phases and 1no 25 x 6 mm Neutral with synthetic moulded compound support, one for 13 way Test Terminal Block Front Connection type with 4Nos. 2A HRC fuse base with fuse links, one for 3Nos. of 250A HRC DIN type Fuse Base and Fuse links with 150A/5A Cts of PVC insulation type from reputed make and another compartment for Cable entry with danger board with superscribing of Cable size, powder coated painting of one coat of redoxide and two coat of synthetic enamel grey paind as specified the departmental officials and with necessary 6mm thickness hylem sheet separation for energy meter hamber, test terminal block with 2A fuses chamber and 250A Fuse units and CT Coils chamber, with 2.5 & 4 Sq.mm PVC insulated Cu wires for interconnections, with transporting, loading, unloading, commissioning & testing.

Supply erection, Testing and commissioning of 2 TR split type 3 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 2 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz single phase AC supply.(Make - Carrier/ OGeneral/ Daikin/ Toshiba)

Supply and fixing of 5 KVA voltage stabilizer (V guard /Eq.make ) suitable for 2 tons capacity split type air conditioner with 3 minutes time delay and low / high voltage cut off switch (wall mounting) with necessary wire connection.

Supply and laying of 5/8'' and 3/8'' copper pipe. (Extr beyond 3Mtrs supplied with AC Unit)(For split AC Unit)

Supply and Fixing of MS stand for fixing outdoor units.

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 13 persons capacity passenger lift as per the following specifications including taxes and duties. 1.Location: District Registrar Office Tindivanam 2.No of lift: 1 No 3.Type of lift: passenger 4.Capacity of lift: 13 persons / 884 Kgs 5.Speed: 1.5m / sec 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions 7.No of floors: GF + 2 Floor 8.Total travel: 3.3 mts x 2 = 6.6 mts 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping 10. Construction of CAR: No 4 hardened sheet high quality stainless steel car with hand rail granite flooring, Mirror and Perspex false ceiling. 11. Position of machine: directly above the lift well. 12. No of landing service: one in the front side-3 no’s 13. No. of car entrance: one in the front side only 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door 15. Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings. 16.Lift well Size : 2770 mm (wide) x 2200 mm (depth)as per ISI 14665(part1) 2000 17.Lift pit depth:1600 mm 18. Car size:2000 mm (width)x1100 mm (depth) as per IS 14665 (part 1 )2000, 19. Car clear opening: 900 mm wide x 2000 mm height as per IS 14665 (part 1)2000

20.Lift machine room size:4000 mm wide x 5000 mm depth as per ISI 14665 (part 1)2000 21. Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light. 22.Control: micro computer (micro processor):based simplex collective control with / without attendant 23. Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan. 24. Lift well: RCC construction with brick masonry to be constructed by PWD civil wing. 25. Induction: UP / DOWN digital direction and position indicator for all landings and inside the car. 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device 27.Emergency light: battery operated light to be provided with automatic charging device 28.Fire mans switch: to be provided at the GF 29. Minor builder works: to be provided by the lift contractor. 30. Scaffoldings: to be provided by the lift contractor. 31. Sill angles and fascia plates: SS to be provided by the lift contractor. 32. Steel for lift machinery: to be provided by the lift contractor.

33. Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor. 34. Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories. 35. Provision for intercom with phone: to be provided by the lift contractor. 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor 37. Floor position announcer: to be provided by the lift contractor. 38.Special features a) Infra red door sensor with full height screen b) Full width half height rear panel mirror c)Tubular SS hand rail in car d) Stainless steel signal features e) Vandal proof SS button with SS cover f) SS door frames for landing doors g) V3F door operator h) Call register signal i) Stainless steel fascia plates for car operating panel and landing fixtures j) Steel ladder for lift machine room k) On / off switch for fan and light l) Over load warning indicator with audio announcer m)Voltage stabilizer for control circuits n)Braille button

o) Granite flooring provided by the lift contractor 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries 40. Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor. 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department 42. Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No. 8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply of 1 No 58.5 KVA diesel generator set with AMF Panel 0.8 P.F, 3 ph, 415v / 420 volts, 50 c/s, 1500 RPM as detailed below. Engine : Water cooled diesel engine suitable for generator application with a shaft output of suitable BHP at 1500 RPM under NTP conditions as per BSS 5414-ISO 10000 The engine shall comprise the following standard scope of supply : (Make Kirloskar) 1) Dry type Air cleaner. 2) Expansion bellow. 3) Radiator, radiator fan and mounting. 4) Air to air charge cooler. 5) Exhaust gas turbo charger. 6) Lube oil cooler and lube oil filter. 7) Fuel filter (pre and micro) 8) In-Line mono-block fuel injection pump with governor and fuel feed pump. 9) Electronic governor. 10) 24V battery charging alternator. 11) 24V Volt electric starter motor. 12) Engine test certificate. 13) Residential Muffler. 14) Fly wheel with Housing 15) Exhaust silencer. Safety system of Engine : The engines shall trip for the following conditions with Visual alarm device. 1. Low lubricating oil pressure. 2. High water temperature. 3. Vee - belt failure and over speed. The following visual indicator should also be provide Low Battery Indication.

The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load. Alternator : Alternator capacity of 58.5 KVA, AC 3 phase, 50HZ, 415 Volts, 0.8 P.F, 4 wire self excited, self regulated designed to run at 1500 RPM under NTS conditions conforming to BSS 5000 / IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate. (Make : Kirloskar Green /Crompton Greaves / Equivalent) ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC machines to maintain dimensional accuracy of hole within 0.1mm powder coating done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT 64kg/m density mineral wool of 100mm thickness as acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt. distance shall be less than 75DBA average or as per CPCB norms. SURFACE TREATMENT - PAINTING The enclosure shall be suitably treated for degreasing, de-rusting and posphating. The canopies are passed through seven-tank treatment thoroughly.

ADDITIONAL FEATURES OF CANOPIES Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips / structures are used in canopies so as to give studiness and to reduce the vibrations of the DG sets if any. WORLD CLASS COOLING PACKAGE : Canopies shall have cooling package for which it can also perform at 45 deg c / ambient temperature. No grounding required on the ground, only a level surface capable of with standing the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading. TEMPERATURE RISE INSIDE THE CANOPY : Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well with in 5-7 deg centigrade. BASE FRAME : Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation charges. FUEL TANK : 120 Lts. Integral Built in Fuel Tank shall be fabricated out of 14 SWG CRCA MS sheet and its part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Supply of

Diesel to run and test the generator at full load for 8 hours. BATTERY : 12 V 180 AH battery. h) Supply of maintenance manual books with engine and alternatore parts list. i) Supply of tools required for the maintenance and operations of the Generator set. J) Mounting of starting batteries of ½" thick hylem sheet base with suitable angle iron frame work support on the floor by the side of generator set to conform to latest CEIG conditions. k) supply and laying of annunciation cable of suitable capacity and length between engine and the control panel of the generator set .

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Erection of Gen set: Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation erection of 58.5 KVA Generator set over the existing foundation and erection of Generator set with proper alignment over the existing foundation to suit 58.5KVA Gen set foundation size Suitable.

Preparation of site plan, physical layout, electrical line schematic diagram in 10 sets. Getting drawing approval from CEIG, preparation of completion report, rectification report and arranging CEIG’s inspection and obtaining safety certificate.

Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

Supply and fixing of 4 MP Fixed Mini Bullet Network Camera.High quality imaging with 4 MP resolution. Excellent low-light performance via powered-by-DarkFighter technology. Efficient H.265+ compression technology Clear imaging against strong back light due to 120 dB true WDR technology. Water and dust resistant (IP67) Robust structure design with full metal material. Make:Hikvision/equivalent.

Supply and installation of 4U Metal Rack with front class door, Lock and Key, also with power manager.

Supply and installation of 9U Metal Rack with front class door, Lock and Key, also with power manager.

Supply and Installation of Switch 24 port POE switch for CCTV IP camera with accessories. Make: Hikvision / equivalent.

Supply and installation of 32 channel 2-SATA NVR - (Network Video Recorder). Up to 16 channel IP cameras can be connected. Supports decoding .265+/H.265/H.264+/H.264 video formats. Up to 4K high-definition live view, storage and playback. Up to 8-ch @ 1080p decoding capacity. Up to 160 Mbps high incoming bandwidth ensures IP cameras can be connected. 1 HDMI and 1 VGA interfaces: both interfaces support independent video output. 2 HDDs for continuous video recording.Make: Hikvision

Supply and installation of 4TB visual HDD (Hard Disk Drive) with SATA interface. Engineered specifically for surveillance security systems. Tuned for write-intensive, low bit-rate, high stream-count applications typical to most surveillance applications. Prioritized write-operations for maximized surveillance performance. TLER and ATA streaming support.Make: Western Digital/ equivalent.

Supply and Installation of 32" inches professional commercial display Make: Panasonic/LG/Samsung.

Supply and fixing of RJ45 LAN socket with suitable module box and face plate in flush with wall and making good of the concelaed portion (Make - Legrand/Equivalent)

Supply and installation of Ethernet patch Cord 1 m length.

Supply and installation of D-Link Make 48 Port Fully managed 10 /100 /1000 Layer-2 LAN Network Switch.

Supply of D-Link Make 24 Port Unmanaged 10 /100 /1000 Layer-2 LAN Network Switch.

Supply and installation of D-Link Make 24 Port patch panel fully loaded.

Supply and fixing of 25mm PVC rigid pipe on wall and ceiling with suitable colour for CCTV and LAN.

Supply and run of Cat-6 cable in existing PVC rigid pipe on wall and ceiling.

Supply and installation of 1 kVA UPS with 150 AH Batteries with 2 hours power backup. Make: Microtek/Numeric/Equivalent.

Supply and installation of Basic Telephone without Caller ID Model High quality Push Button Telephone.

Supply and installation of Caller ID Telephone with Speaker Model High quality Push Button Telephone with Caller ID.

Supply, fixing and termination of 20 pair MDF Box with module and Krone.

Supply and run of orbit Make or Equivalent 0.5mm copper unarmoured 2 pair telephone cable in existing concealed PVC rigid pipe.

Supply and run of orbit Make or Equivalent 0.5mm copper unarmoured 20 pair telephone cable in existing concealed PVC rigid pipe.

Please Enable Macros to View BoQ information