Kurinjipadi TP - Shredding Machine Supply

Amount

Manufacture and Supply of Shredder machine only for segregation gerbage should have using MS plate 20mm,10mm,3mm & channel 75 x 40, L Angle 40 x 60 & shaft 60mm dia. capacity of 1 Mt to 1.5 MT / Hr with single shaft cutter , stell grade blade, 10 HP motor,size 600 mm x 800mm x 600mm chute - yes (Feeding & discharge) with manual feeding, Electrical - 10 HP starter only without cable, total machine height is 2000mm & width 1200 mm, feeding conveyor 1-No (Manual). etc, complete ( Including GST 18%)

Supply , fixing and commissioning of Belt conveyor length of 6 mtrs and breath of 0.50 Metre wide for organic waste shorting and conveyor structure should made with M.S Heavy Tubes, M.S channels with Gear Motor of 2HP / 50RPM / 440V / chain drive Motar Rollers with heavy rollers : 2 nos , and shaft should be of ISI standard Bearings,MOC- EN 8 make should be of 'HAVELLS' / MARATHON and the total setup should covered with FRP.The conveyor should be with branded starter,motor should be heavy duty performance , FRP Hopper with necessary safety guard facilities and all materials should be got approved by the corporation Engineers in charge before fixing in position including cost of materials and labour charges etc complete. ( Including GST 18%)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) SD 167 ( Including GST 18%)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5 A flush type switch on suitable MS box in flush with wall as per SD 135 ( Including GST 18%)

Wiring 2x4sqmm (22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100 V grade in suitable PVC rigid pipe consealed in wall and ceiling with PVC accessories with flush with wall with 150x100x113mm TW switch box 3 mm hylum sheet for 15 A 3 pin non interlocking CS plug with continious earth connection of 14 SWTC wire and makaing good of the consealed portion with suitable colour for consealed power plug pint SD40 ( Including GST 18%)

Brick Work in CM 1:5 mix using country bricks 8 ¾ " x 4 ¼ " x 2 ¾" including cost and conveyance of materials and labour charges etc., complete as per standard specification. ( Including GST 18%)

Removing and refixing the another places existing Screaning Machine including labour charges for removing and refixing the screaning machine fixing testing and all other labour charges including cost of concrete works to screaning machine base fixing etc complete ( Including GST 18%)

Supply and removal of MS Grill to MCC gate labour charges for removal of existing damaged grills and gates including labour charges for removal and fixing new grill including cost and labour charges ctc complete ( Including GST 18%)

Plastering with CM 1:4 mix using 12 mm thick including cost and conveyance of materials and labour charges etc., complete as per Standard Specification ( Including GST 18%)

sree saro engineering