Loading…
Loading…
Tender Value
Refer Docs
Closing Date
9 Apr 2025, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
91
1 condition · 1 needing a document upload
Supply to be as per tender specification.
18 conditions
1. Goods & Service Tax: Please refer Part A Para 14.0 Southern Railway Tender Conditions.
[a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. In case firm mis-classifies HSN Code/GST rate, higher GST, if any, due to this misclassification shall be paid and borne by the firm itself. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC. [i] Tenderers should upload GST rate along with documentary evidence, HSN code and full bank details of the firm.ie Bank name, bank address, Account Number, IFSC code & MICR code along with the bid. [j] Firm should also give a declaration that any additional Input Tax Credit benefit, if become available to supplier, the same shall be passed on to purchaser without any undue delay.
All taxes, freight, packing, forwarding & other charges should be quoted in numeric only @ financial tabulation.
General damages at the rate of 5% of the defaulted contract order value will be levied in case of failure to supply the material after placement of purchase order, within the delivery period. In case of failure to comply with the contractual obligations, Railways shall record poor performance of the vendors for taking suitable penal action as per extant instructions. Wherever SD has been exempted or not applicable for any reason or is less than the general damages as indicated above, and the supplier fails to supply goods as per conditions of contract, as amended from time to time, Purchaser have the right to levy damages from the supplier for failing to comply with contractual conditions. These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly.
Liquidated Damage (L.D): Extension of delivery period may be considered in deserving cases where genuine reasons exist. Such extensions of delivery period may be considered with liquidated damages as per IRS Conditions of Contract and Denial Clause. Railway shall recover from the contractor as agreed Liquidated Damages and not by way of penalty, a sum equivalent to 1/2% (half percent) of the price of any stores (including elements of taxes, duties, freight, etc) which the contractor has failed to deliver within the period fixed for delivery in the contract or as extended for each week or part of a week during which the delivery of such stores may be in arrears where delivery thereof is accepted after expiry of the aforesaid period, subject to a maximum of 10% (ten percent) of the value of the contract irrespective of delays, unless otherwise provided specifically in the contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(1) As per Section 171 of GST Act 2017, as a remedy against anti-profiteering, INPUT TAX credit benefit if any accrued should be passed on to the Purchaser as reduction in Basic Price, or else the following certificate should accompany the bill: It is certified that no INPUT TAX credit benefit has accrued on materials invoiced/billed for, that can be passed on to Purchaser. B) Firm should submit the Invoice/Bill clearly indicating the appropriate HSN and applicable GST rate thereon duly supported with documentary evidence. C) Firm should also give a declaration that any additional Input Tax Credit benefit, if become available to supplier, the same shall be passed on to the purchaser without any undue delay (2) All the Bidders/ Tenderers should ensure that they are GST compliant and their quoted tax Structure / Rates are as per GST Law. In case the successful tenderer is not liable to be registered under CGST/GST/UTGST/ SGST Act, Railway shall deduct the applicable GST from his / their bills under Reverse Charge Machanisam (RCM) and deposit the same to the concerned tax authority. (3) - 1.RAILWAY IS NOT BOUND TO ACCEPT / CANCEL THE LOWEST OR ANY TENDER OR TO ASSIGN ANY REASON FOR DOING SO AND RAILWAY RESERVES THE RIGHT TO ACCEPT / CANCEL ANY TENDER IN RESPECT OF THE WHOLE OR ANY PORTION OF THE ITEMS SPECIFIED IN THE SCHEDULE ANNEXED (OR TENDER SCHEDULE) AND THE CONTRACTOR SHALL BE REQUIRED TO SUPPLY THE SAME AT THE RATE QUOTED. 2.VENDORS MAY PLEASE NOTE THAT GIVING INTIMATION REGARDING THE TENDER IN OPEN TENDER CASES OR GIVING LIMITED TENDER ENQUIRY DOES NOT GUARANTEE THE SUITABILITY OF OFFER FOR PLACEMENT OF PURCHASE ORDER. RAILWAY RESERVE THE RIGHT TO PLACE PURCHASE ORDER SUBJECT TO FULFILLMENT OF TECHNICAL / COMMERCIAL ELIGIBILITY CONDITIONS/ TENDER CONDITIONS.
3 locations across Karnataka, Kerala · 3 Numbers total
Executive Table , Office Table and Conference Table
91246083
91246083
Limited - Indigenous
Goods
Karnataka
₹0
Exempted
9 Apr 2025
31 Mar 2025
3 items · 3 Numbers total
EXECUTIVE TABLE WITH KEY BOARD TRAY, PEDASTAL SIDE STORAGE UNIT & EXTENDED RETRUN UNIT (ERU) WITH MODESTY PANEL. MATERIAL- WOOD/ENGINEERED WOOD, TABLE TOP-THICKNESS 20MM-25MM, MINIMUM -LENGTH 1800 MM, WIDTH 750 MM AND DEPTH 750 MM. PEDESTAL BAR STORAGE UNIT HAVING 2 CLO SED COMPARTMENTS, KEYBOARD TRAY WITH LAMINATED PLASTIC MATERIAL/PARTICLE WOOD AND KEYBOARD DRAWER MECHANISM IN TELESCOPIC. LEFT HAND SIDE ERU MATERIAL SHOULD BE PARTICLE LAMINATED BOAR D HAVING WIDTH 900 MM AND DEPTH WITH 450 MM. [ Warranty Period: 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CWS/C&W/MAQ, SR | Karnataka | 1.00 Numbers |
| Total | 1 Numbers | |
Office Table 1800 X 900 X 760 MM Specications Conformity to specication IS 8126. Type of Comp osite Oce Table Table with double. storage unit .Type of Storage Units Drawer and ling unit Type of Tubular Ped estal Mild Steel Tubular Pedestal Material of Table Top Particle Boards . Table Top Length (mm) X Width (mm) X Thickness (mm) (Tolerance as per clause 5) 1800 X 900 Color Family of Painted Brown Warranty (year) 3. [ War ranty Period: 36 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| IPF/PGT, SR | Kerala | 1.00 Numbers |
| Total | 1 Numbers | |
Executive Table WITH ONE SIDE E.R.U unit . Specifications Structure /Frame of table Gable end an d modesty panel The type of Storage provided One side pedestal unit and E.R.U Keyboard tray Not provided Foo trest Not Provided Tabletop Material Commercial Block Board MR Grade Conforming to IS 1659. Thickness of tab le top material (Dimension Tolerance ? 1 mm) 19 mm Gable end material Commercial Block Board MR Grade Co nforming to IS 1659 The thickness of the gable end 19 mm Modesty panel material Commercial Block Board MR Grade Conforming to IS 1659. The thickness of the modesty panel material 15 mm, Leg Material NA .The thickne ss of the Leg material NA, Width of tabletop (Dimension Tolerance ?10 mm) 3300 mm Depth of table (Dimension Tolerance ?10 mm) 1200 mm Height of table (Dimension Tolerance ?10 mm) 750 mm, Size (L x W) diameter of l eg material (Dimension Tolerance ? 5 mm), NA, ERU unit consists of 2 torage units with shutter Total Number of drawers /storage in Pedestal units Three drawers. Table top finish Laminate in color with swede finish 0.6-0.8m m thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on another side.Tabletop shade. Dark walnut, Table /ERU /Pedestal Panel Plain Side, CP Teak Wo od Lipping Warranty period -1 Year, Test reports to be furnished to the buyer on demand -No. [ Warranty Perio d: 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DSC/PGT, SR | Kerala | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5340964.pdf
ATTACHMENT
5341162.pdf
ATTACHMENT
5340993.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .