Renovation of ground floor of JEEVAN BHARTI Building pertaining to LIC (Near Connaught Place), including civil works, electrical works, air conditioning works

Amount

(A) CIVIL WORK

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

(a) 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for :

(a) Shelves (Cast in situ)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

(a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :

(a) cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

(i) Granite of any colour and shade

(a) Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

(a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

(a) 1.0 mm thick

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in charge (Frame work shall be paid for separately).

(a) 6 mm thick commercial ply conforming to IS : 1328 BWR type

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

(i) Double charge vitrified tile polished finish of size

(a) Size of Tile 600x1200 mm

(ii) Glazed Vitrified tiles Matt/Antiskid finish of size

(a) Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

(a) Size of Tile 600x600 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with :

(a) 12.5 mm thick tapered edge gypsum moisture resistant board

12 mm cement plaster of mix :

(a) 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix:

(a) 1:4 (1 cement: 4 coarse sand)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

(a) Two or more coats on new work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

(a) Two coats

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

(a) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

(a) For thickness of tiles 10 mm to 25 mm

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing under counter ovel wash basin with CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China under counter ovel Wash basin size 555x425x195 mm with a CP Brass single hole basin mixer Wash basin cat. no.FLS WHT-5701 Jaquar/ Equivalent Brand Mixer cat. no.FLR -5167NB Jaquar/ Equivalent Brand

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

(i) Kitchen sink without drain board

(a) 610x460 mm bowl depth 200 mm

Providing and fixing 600 mm long glass shelf with edges round off, with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Glass shelf cat. no.ACN-1171N Jaquar/ Equivalent Brand

Providing and fixing toilet paper holder with stainless steel flap :

(a) toilet paper holder with stainless steel flap cat. no.ACN-1153s Jaquar/ Equivalent Brand

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

(a) 100 mm dia pipe

Providing and fixing plain bend of required degree.

(i) 100 mm dia

(a) Sand cast iron S&S as per IS : 3989

Providing and fixing single equal plain junction of required degree :

(a) 100x100x100 mm

(i) Sand cast iron S&S as per IS - 3989

Providing and fixing collar :

(a) Sand cast iron S&S as per IS - 3989

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

(i) 100 mm inlet and 100 mm outlet

(a) Sand cast iron S&S as per IS: 3989

Providing and fixing CP Bottle Trap for Wash basin and sink.

(a) Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms cat. no.ALD-769L250X190 Jaquar/ Equivalent Brand

Providing and fixing soap dispenser with glass bottle of approved quality and colour, cat. no.AKP-35735P Jaquar/ Equivalent Brand

Providing and fixing towel ring round with round flange from wall face with concealed fittings arrangement of approved quality and colour, cat. no.ACN-1121BN Jaquar/ Equivalent Brand

Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

(a) 600 mm long towel rail Stainless steel cat. no.ACN-1111SM Jaquar/ Equivalent Brand

Providing and fixing white vitreous china extended wall mounting water closet of size 375x620x770 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. cat. no.CNS-WHT-353SPPZ Jaquar/ Equivalent Brand

Providing and fixing white vitreous china auto closing push cock manual operated urinal of approx. size 475x315x715 mm , including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Urinal cat. no.URS-WHT-13259 Jaquar/ Equivalent Brand Push Cock cat. no.PRS-073 Jaquar/ Equivalent Brand

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

(a) 15 mm nominal bore

Providing and fixing braided hose pipe with brass unions : cat. no.ALD-805B Jaquar/ Equivalent Brand

(a) 45 cm length

(i) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 cat. no.CON-059N Jaquar/ Equivalent Brand

(a) 15mm nominal bore

Providing and fixing CP SS grating of approved quality and colour.cat. no.PGR-3903 Prima/Jaquar/ Equivalent Brand

(i) Circular type

(a) 125 mm nominal dia with 25 mm waste hole

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, uspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

(a) With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.

Providing and fixing mirror of superior glass 6mm thick of approved make such as Saint Gobain, Modi Guard, Asahi or equivalent with bevelled edges of approved quality and of required shape and size of approved quality and shade with 12mm thick ply backing including fixing mirror with silicon, sealant all around etc. complete as per direction of Engineer-in-charge.

P/F sheer Dimout blinds (zebra blind) of approved shade and colour including operating system complete of approved brand and manufacture (MAC[VISTA] or equivalent) as per direction of Engineer-in-charge with all accessories required to operate i/c cutting and making opening for air conditioner where required.

Providing and fixing 12 mm thick laminated wooden flooring with 1mm sound block with wear resistance grade AC-5 (Vista Vintage) or equivalent top surface having high pressure laminaate and treated with aluminium oxide surface in floor inlcueing an under layer of min 0.20 mm thikalkali resistant polythylene sheet of density 923kg/m3 laid on existing floor for protection of moisture and polythylene foam all complete as per manufacturers recommendation and direction of Engineer-in-charge.

Providing and fixing stainless steel tubular handle bar 32 mm outer dia, 3.0 mm thick & 475 mm long Cat No. OGH-55 of make OZONE with SS screws etc. complete as per direction of Engineer-in-Charge.

Providing and Fixing Stainless Steel L Type wall to glass Connector 90 degee for fixing frameless Glass Partition of ozone or equivalent make as per manufacturer specification screws etc complete. Code OGC - 4A of make OZONE

Providing and fixing glass door lock with strik box (without cut out) CAT No. OPL-4A/4B-N of Ozone make or equivalent etc. complete as per Direction of Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : cat. no.KUP-35037PM Jaquar/ Equivalent Brand

15 mm nominal bore

Providing and fixing C.P.Robe/Double Coat Hook of approved quality conforming to IS:8931 : cat. no.ACN1171N Jaquar/ Equivalent Brand

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. cat. no.ALD-579 Jaquar/ Equivalent Brand

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia each

Providing and fixing C.P.Sink Mixer of approved quality conforming to IS:8931 : cat. no.FLR-5165 Jaquar/ Equivalent Brand

15 mm nominal bore

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners complete. Aluminium sections shall be smooth, rust free and be fixed as per arctetural drawing asper direction of Engineer-in-charge.)

(a) Aluminium (Without anodizing) frame work.

Providing and fixing 12 mm thick frameless toughened glass partitions shutter of approved brand and manufacture, including providing and fixing top & bottom Channels fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

P/F 8 Providing and fixing 6mm thick lacquered glass of saint gobin as per approved color & make or saint gobin, & Equivalent (COLOR :- ATTOL BLUE, TITANIUM GREY, SOLAR Y"ELLOW, ULTRA WHITE). will be fixed on column using silicon/tape & Grinding of Edges all complete as per the architectural drawings and the direction of Engineer-in-Charge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

(A) For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

(B) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.

Pre-laminated particle board with decorative lamination on both sides

Providing and fixing soil, waste and vent pipes :

100 mm dia

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Granite Stone of approved shade

Providing and fixing frosted 3D sunshade film for garware make of a approved shade on the glass panes of existing glazed shutter of size to protect the room from the direct sun light including clean the glasspanes cutting the film to required size and fixing the same complete in aqll respect as per direction of Engineer-in-charge.

Providing and Pasting Imported Graphic Designer Wall Paper of thickness 0.50 mm in existing walls inculding adhesive etc.. complete as per direction of Engineer-in-charge

(B) ELECTRICAL WORKS

POINT WIRING

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as required.

GROUP-C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earh wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Supplying and drawing following pair, 0.5 mm dia FRLS PVC insulated copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.(for DATA /TelePhone System)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

Telephone socket outlet.

TV antenna socket outlet

Bell push

Providing and fixing circular / Hexagonal cast iron or M.S Sheet Box for ceiling fan clamp of internal dia 140 mm , 73 mm height top lid of 1.5 mm thick M.S Sheet with its top surface hacked for proper bonding , top lid shall be screwed into the cast iron / M.S sheet box by means of 3.3 mm dia round headed screws , one lock at the corners clamp shall be made of 12 mm dia M.S bar bent to shape as per standard drawing

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mm x 75mm)

3 Module (100mm x 75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for D.C./A.C. single phase, 230 volts, complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required / Chandelier light fixture.

Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and drawingof UTP 4 pair CAT 6 LAN Cable in the existing surface / recessed steel / PVC conduit as required.

1 run of cable

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required

GROUP-C

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos.3 pin 5/6 amps modular socket outlet and 2nos. 5/6 amps modular switch, connection, etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular socket outlet and 25 amps modular SP MCB "C" curve including , connection, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way Double door

Supplying and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'C' curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

GI RACE WAYS

Supply, laying & fixing 14 SWG Single compartment GI race way of following sizes with 14 SWG openable covers at regular intervals along with necessary cable support system as directed including providing of floor junction boxes & fixing accessories like dash fasteners cable ties etc. complete in all respects including earthing of raceway with 4sq.mm. PVC insulated wires. Including cutting/ chasing & finishing of floor and making good. Raceway shall be 10mm to 15 mm below of Floor finish level. The junction boxes shall be with 3.0mm S.S plate.

40 x 200 x 40 mm deep

40 x 150 x 40 mm deep

40 x 100 x 40 mm deep

MS JUNCTION BOX FOR DATA & VOICE

Supply & fixing of 16SWG under floor box along with 10SWG stainless steel cover plate as required.

230 x 230 x 60mm deep

180 x 180 x 60mm deep

130 x 130 x 60mm deep

Supply and fixing of the following Telephone Tag Block made out of M.S sheets of 18 SWG thickness properly welded complete with all accessories such as Tag block, connector (KRONE make), mounting strips, tapped holes, fixing bolts, approved shad of paint after primer as per specifications.

TELEPHONE CABLES

Supplying, wiring and connecting following pairs 0.6 mm dia twin core tinned copper conductor PVC insulated and sheathed Unarmoured telephone cables in existing pipes.

10 pair cable

Same as 35.1 but 10 pair telephone cable of jelly filled Armored cable in existing pipe.

Supply and fixing following Data /Lan modular socket on the existing modular plate including connections but excluding modular plate etc. as required.

RJ - 45 Socket.

PATCH PANEL

Supply, receiving,storing,fixing, testing and commissioning of 24 port equipped panel for data socket, CAT 6 cable (UTP 24 x RJ45 connectors equipped panel-8 contacts)

Supply of luminaires basic channel, holder, electronic ballast , LED driver (as per mentioned in item), starter, condenser, control gear box complete with decorative attachments, lamps etc.as per specifications and as per catalogue number giving below.

Decorative recessed 32W LED light fixture Philips Cat No.RC380B LED36S -6500 G4 L60 W60, (3600 Lumen) or equivalent.

Decorative recessed 15W LED Down light fixture Philips Cat No. DN296B LED 15S-6500 PSU WH S1 (1500 Lumen) or equivalent.

Decorative recessed 6W LED light fixture Philips Cat No. DN 295B LED8S-6500 PSU WH or equivalent.

Ceiling mounted chandelier light fixture as per approved by client / Architect (Basic cost approximately Rs.4000/-) .

Wall mounted Picture light fixture as per approved by client / Architect (Basic cost approximately Rs.2000/-) .

SUPPLY OF CEILING/ PROPELLER TYPE EXHAUST FANS (WITH GRAVITY LOUVERS & BIRD SCREEN)

1200 mm sweep ceiling fan (5STAR RATING)

380 mm dia 900 rpm exhaust fan.

FIRE ALARM SYSTEM

AUTOMATIC FIRE ALARM AND DETECTION SYSTEM

The work shall comprise of design, supply, erection, testing and commissioning of the entire system as per specification and drawings and comprising of smoke detectors heat detectors, photocell detectors, control panels, manual call points, hooters etc. including, fixing, accessories, cabling, fixing and mounting arrangement of components and equipment, making holes in wall/ ceilings for passages of cables & making good the same, proper saddles for fixing of cables as required to complete the job in first class workman like manner.

DETECTORS

SMOKE DETECTORS

Optical type smoke detector complete with mounting base LED indicator etc., as per specifications.

HEAT DETECTORS

Rate of rise cum fixed temperature heat detectors with LED lamps base etc. as per specifications.

RESPONSE INDICATORS

Supply, Installation, Testing & Commissioning of response indicator with plastic cover and transparent LED which shall glow red in case of fire with MS box on wall / Ceiling including connections etc

Supply, Installation, Testing & Commissioning of response indicator with plastic cover and transparent LED which shall glow red in case of fire without MS box on wall / Ceiling including connections etc.

MANUAL CALL POINTS

Manual break glass type call points switch cast aluminium housing and chain as per specifications.

ELECTRONIC HOOTERS

Providing, fixing, testing and commissioning of dual tone electronic wailing tone fire alarm sounder having Philips 4" round/8 ohms speaker & oscillator amplifier, all housed in 16swg CRCA sheet metallic box, with suitable 19mm/16swg metallic conduit top and back entry knokout arrangement.

FIRE ALARM MAIN PANEL

Providing, fixing, testing and commissioning of main control panel of 4 zones as per IS-2189 with battery and charger. Each and every zone should have of visual indication like isolation, fire open circuit in detector, circuit fire alarm acknowledge fault alarm acknowledge, the main panel should be housed in 16swg CRCA sheet enclouser with front door having lock and key. Each and every zone should have the following switches Isolation, fire test, open circuit test, short circuit test, fire alarm acknowledge fault alarm acknowledge alarm test, the power supply should be heavy duty with suitable size battery charger with 12 hours backup Dry maintenance free battery. The panel will have AC switch, AC/DC fuse, indication, Battery low indication. The panels shall have a facility to trip the AC system & activation of PA system in case of fire including Microphone. 5Nos Relay module shall be provided in panel for tripping of AHUs & fire damper etc. (System shall be Integrate with Existing Fire alarm System)

Fire Exit sign board with 5W LED lamp with fixing/hanging arrangement including wiring & termination (as per sample approved)

Supply and fixing of rigied ERW steel conduits (ISI marked) of following sizes including conduit accessories such as junction boxes, bends, elbows, sockets, tees and MS flexible conduit to connect from ceiling to false ceiling etc. laying in slab , cutting chases and making good or surface mounted including all fixing hardware .

20 mm dia

25 mm dia

Supplying,fixing, testing & commissioning & terminating of following Cu Conductor, 1100V FRLS, PVC insulated wire in existing PVC Conduits/raceway/tray for Fire Alarm Systems

2 x 1.5 sq. mm

4 x 1.5 sq. mm

Supplying, fixing, testing & commissioning of 2 core 1.5 sqmm Cu conductor PVC insulated PVC sheathed FRLS armoured Cable including termination & all fixing arrangement

Supply, drawing, testing & commissioning of PVC insulated PVC sheathed 4 core 2.5 sq.mm. Cu. Armoured cable including all fixing arrangement & termination.

AIRDISTRIBUTION ( MAKE : SAIL/JINDAL )

G.I ducting with necessary supports - Supply Air (Site Fabricated)

Acoustic insulation of ducts with 12 mm fibre glass wool rigid board covered with RP tissue paper.

Nitrile Rubber Insulation on sheet ( MAKE : ACCOFLEX/K-FLEX )

Extruded Aluminium powder coated Grill ( 6 '') - Supply.

Extruded Aluminium powder coated Grill ( 6 '') - Return.

Extruded Aluminium powder coated Square Diffuser

GSS Volume Control Damper (VCD) for Duct

MS Collar Damper

Fire Damper 16 G

Canvass Connection.

dynamic engineers

CIS GLOBAL INFRATECH PVT LTD