SPECIAL REPAIR TO OLD TRATA HOUSE AT VV COMPLEX UNDER GE (NW) NOFRA

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Taking down chowkats or frames but exceeding 1.5 sqm each but n exc 4 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames without taking off shutters from the frame n.exc 1.5 Sqm, complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling Single layer Mangalore pattern or similar tiles in roofing, complete all as specified.

M&L for roof tiles, Mangalore pattern, interlocking at side joints laid dry complete all as specified.

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified.

M&L for Mild Steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Demolition of brick work built in cement mortar, complete all as directed.

M&L for AAC block (Compostion of block Fly Ash - 55-60%, Cement OPC 53 Grade 30-35%, Lime - 6-8%, Aluminium Powder - 0.05 - 0.10%) of size 100x200x600mm work in CM 1:6 with comprehensive strength not less then 4.00N/mm2 (IS 2185), minimum dry density not less then 500Kg/m2 complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls and ceiling including racking of joints hacking for key scrubbing down with water etc incl all necessary scaffolding etc.

Point

M&L for applying fair finish 15mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.

M&L for Preparation of newly plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint (all weather proof) of required shade over a coat of exterior primer, complete all as specified.

Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer on 2 to 3 mm thick wall care putty all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as directed.

M&L for machine cut cudappah stone slab 35-40mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L Granite (of any type) work (table rubbed and polished) 18-20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, and nosing /rounding to edges of stone slabs one edge, all as specified and directed.

Supply and fix colour powder coated (50 micron minimum thickness) aluminium section for sliding/fixed in frame/shutter for doors, windows, ventilators etc with one or more rebate, including joining cleats for fixing, fixed type/louvered window or ventilator with or without sash bars including necessary locking arrangements, glazing clips, rubber packing, anodized aluminium snap beading, screws etc complete all as specified and directed. Note :- (i) Glazing shall be measured and paid separately. (ii) Item shall be paid as per weight of aluminium sections as per manufacturer catalogue. However the rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws, appropriate handle, locking arrangement etc.

Supply & fix Sheet glass, ordinary quality in square exceeding 0.50 Sqm each pane, 4.80mm thick fixed to Aluminium section complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F powder coated aluminium grill including suitable powder coated aluminium anodised frame F/H section as requird manufactured by approved make design No DG- 104, 7.5 mm thick all as specified and as directed.

S&F 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceose

Supply and Fix 35mm thick flush shutters, solid core, construction, with block board core and both faces covered with decorative face veeners with lipping / frame including teak wood beading all around the shutter to match complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.

tory windows & other Frames/Chowkhat of size 65x125 mm (double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

M&L factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwsand as per specification & drawing complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified.

S&F PVC wall panelling consisting of 5mm thick wood grain printed PVC sheet and fixed over GI running channels 50mm wide and 0.6mm thickness at every 1m interval , fixing over brickwall /concrete walls with screws and all corners, top and bottom portion of PVC lining covered with L/T shaped PVC sheet of same colour/texture including all necessary cuttings near switch boards and other fixtures if fitted over wall, complete all as specified.

S&F 18/19 mm thick Block boards, grade 2 quality, interior grade, with decorative face veneer on both side with decorative choice lamination as approved by GE fixed with screws to timber frame work including 6mm thick teak wood beading all around complete all as specified and directed.

S&F 150mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed.

S&F plastic body Magnetic catcher with iron plate to be fixed with shutters of kitchen cabinet approved pattern and shape fixed with screws on wooden/ plywood surfaces all as specified and directed.

S&F 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws

S&F 300mm Stainless steel matt finish, fancy type (as approved by GE) anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts fixed with SS screws complete all as specified and directed.

S&F 200mm long stainless steel matt finish fancy type (as approved by GE) anodized barrel tower bolt fixed with SS Screws complete all as specified and directed.

S&F 150mm long stainless steel matt finish fancy type (as approved by GE) handle fixed with SS Screws complete all as specified and directed.

S&F 100-150 mm long floor door stopper of stainless steel body and tongue, and rubber fixed on bottom with hard drawn steel spring complete all as specified and directed.

S&F Mortise fancy type main door lock with handle and accessories (as approved by GE), 6 lever lock mechanism with 3 keys fixed with powder coated SS screws to wooden door complete all as specified and directed.

M&L for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F in repair PVC cabinet mirror with openable shutter and mirror with size of 400x500mm of approved make with thickness of mirror not less than 2mm, fixed to wall in repairs complete all as specified and directed.

S&F in repairs Stainless steel curtain rods (304 grade), 20-25mm dia including end brackets, and hanging arrangements etc complete all as specified and directed.

S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand etc. complete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) including fixing bolt including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP aluminum hinges device complete connecting to P or S trap all as specified and directed.

Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Kitchen sink with drainage board made of stainless steel 1mm thick with plugs washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe etc Complete all as specified and as directed.

S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed.

S&F in repairs toilet paper holder of aprroved make with flat recessed type of stainless steel complete all as specified and directed.

S&F in repairs plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Taking up or down GI tubing and connections and removing from store of following sizes, complete all as directed

25 mm bore

15 mm bore

All as per item No. 101 here in before point wiring confirming to IS-732:1989 but for 16 amps socket complete with 2.5 sqmm single core multi stranded FRLS PVC insulated unsheated copper conductor 1100 volts grade confirming to IS-694:2010 drawn through and including rigid non-metallic PVC medium grade concealed conduit of suitable size having thickness not less than 1.2mm including one FRLS PVC insulated and unsheathed multi stranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to comon earth as earth dolly. Note:- (i) Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. (ii) Separate circuit shall be drawn from MCB. No taping from light circuit. (iii) Modular metal flush box shall be paid separately under relevant items of this schedule.

S&F 25 mm bore dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including fixing of pipes in wall with clamps (of approved make) as mentioned and shown in HQ CE (N) MZ TD Drg No TD/2023/01 toTD/2023/03 complete all as specified.

25 mm bore

20 mm bore

Supply and fix in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, with suitable fittings fixed new line and in position complete all as specified.

S&F in repair forged Non returning valve (NRV) of 20mm dia madeup of brass fixed with GI/ CPVC pipe inclding all fixing arragement and fittings complete all as specified and directed.

S&F in repairs 15mm fancy type chromium plated Bib taps, of approved make cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs brass chromium plated over head shower rose 150x150mm including shower arm dia 20mm & 300mm long round shape with 90 degree bend for wall mounted showers with flange stainless steel of approved make, including fixed to 15mm bore pipe, complete all as specified and directed.

Each Job

S&F decorative corner glass shelf shall be size of 300 X 300 mm and 8mm thick with railing 25mm high having edges rounded off and shall be supported on chromium plated brass brackets fixed with chromium plated brass screw on plugs or gutties fixed in wall.

S&F in repairs stop valve /angle valve fancy type of approved make chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and as directed.

Supply and fix in repairs wall mixer of approved make fancy type chromium plated suitable for 15mm dia bore pipe with fittings and complete all as specified and directed.

S&F Soap Dish of approved make fancy type fixed with two Steel/ CP Screws complete all as specified and directed.

Dismantling water tanks exc 1000 ltrs but not exc 3000 ltrs and removing to store complete all as specified and directed.

S&F Rotational moulded polythylene water storage tank tripple layer of 3000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Per cm depth

M&L for cutting holes into or through cement concrete slab, chhajja etc exc 100 sqcm but n.exc 250 sqcm reinforced or otherwise all as directed.

Supply and fixing in repairs bib tap 15 mm dia ,CP cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed

Supply and fix in repairs fancy type bib tap 15 mm dia ,CP cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.

Demolition of Cement concrete of any strength in ground floor and pavings (below or above ground level) and removal of debris to out side MD land upto 60 KM as per BMC guidelines , complete all as specified.

Supply and fix in repairs stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts, providing end brackets/ caps of required shape and size of SS complete including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc, of required size, for the barricades in front each ICR machine for IN and OUT with suitable arrangement as per approved by GE complete all as specified and directed by Engr in Charge.

M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding and removing serviceble tiles to store and rubbish off the permises.complete all as specified & as directed.

M&L for Machine pressed precast concrete rubber finished paver block of size 150x300mm layout pattern and colour as approved by GE fixed with white cement and pigment and thickness 60 mm confirming to IS 15658-2006 of M-35 design mix grade concrete complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11Sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over/ incl 15mm thick screed bed (1:6), complete all as specified and directed.

M&L for Glazed ceramic tiles coloured of size 600x300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM 1:4, complete all as specified.

M&L for light shade coloured double charged vitrified tiles 8-10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 1.00 Sqm in floors and border of 100mm width dark colour tile to be provide where as directed etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for light shade coloured double charged vitrified tiles 9-10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 1.00 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 15 mm thick backing coat in CM 1:4, complete all as specified and directed.

Dismantling of ceiling boards any thickness etc including aluminium grid frame work complete all as specified and as directed.

M&L for false ceiling made out of 600x600x4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed.

S&F in repair PVC low level flushing cistern including brackets 10 litre capacity, with inlet ball valve float, handle, flush pipe etc. complete all as specified and directed.

Taking down Cast iron of 75mm bore fixed on wall or floor at any floor including all fittings complete all as specified.

M&L 75mm PVC (SWR) floor trap with grating including jointing to waste pipe and join

Taking down Cast iron of 100mm bore fixed on wall or floor at any floor including all fittings complete all as specified.

ted with solvent to PVC pipes fixed to wall or in floor fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed.

S&F 110mm PVC (SWR) Bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel access door and jointed with neat solvent to PVC pipes fixed to wall or floor including all fittings complete all as specified and as directed.

S&F in repairs Cast iron work grade FG 150, machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters complete all as specified and directed.

S&F 75 mm bore of of PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to wall or laid in floor, jointed with neat solvent including fixing of pipes in wall with clamps (Make as approved by GE) as mentioned and shown in HQ CE (N) MZ TD Drg No TD/2023/01 toTD/2023/03 complete all as specified.

S&F 110 mm bore of PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to wall or laid in floor, jointed with neat solvent including fixing of pipes in wall with clamps (Make as approved by GE) as mentioned and shown in HQ CE (N) MZ TD Drg No TD/2023/01 toTD/2023/03 complete all as specified.

M&L for RCC (nominal mix) 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in lintels bend upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specifid and directed.

M&L for Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild Steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers, binders etc cut to length, bent to shape required, including cranking, bending binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use & waste Formwork to sides and soffits of floor or roof beams, lintel beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for Anti termite treatment treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per meter of perimeter wall.

M&L for Anti termite treatment at point of contact of wood work by chemical emulsion ( in oil or kerosene based solution ) @ 0.50 litre/ hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre sealing tne same.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L for point wiring confirming to IS-732:1989 complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheated copper conductor,1100 volts grade confirming to IS-694:1990 drawn through and including rigid non-metallic PVC medium grade concealed conduit of suitable size having thickness not less than 1.2mm ISI marked with accessories concealed in wall/floor including cutting chases, pining etc with modular metallic ISI marked terminal boxes, concealed in wall including one FRLS PVC insulated and unsheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following:-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch.

(d) One 3 pin socket outlet 5Amps on independant board.

Point

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(f) One bell pont controlled by one bell push 5 amps independent board.

S&F in repair Modular Switch , 6Amp, One way, 1 module, ISI marked.

S&F in repair Modular Switch , 16Amp, One way, 1 module, ISI marked complete all as specified and directed.

S&F in replacement modular type bell push 6 amps 1 module complete all as specified and directed.

S&F in replair bell electric AC 230 volt single pole ding dong with ISI mark complete all as specified and directed.

S&F in repair Modular Socket , 6 Amps, 2/3 pin combined 3 module, ISI marked.

S&F in repair Modular Socket , 16Amps, 6 pin combined 3 module, ISI marked.

S&F in repair Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module, ISI marked.

S&F in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed.

S&F Modular white cover plate with Frame 1 Module, ISI marked.

S&F Modular white cover plate with Frame 2 Module, ISI marked.

S&F Modular white cover plate with Frame 3 Module, ISI marked.

S&F Modular white cover plate with Frame 4 Module, ISI marked.

S&F Modular white cover plate with Frame 6 Module, ISI marked.

S&F Modular white cover plate with Frame 8 Module, ISI marked.

S&F Modular white cover plate with Frame 12 Module.

S&F Modular metal flush box 1/2 module, ISI marked.

S&F Modular metal flush box 3 module, ISI marked.

S&F Modular metal flush box 4 module, ISI marked.

S&F Modular metal flush box 6 module, ISI marked.

S&F Modular metal flush box 8 module , ISI marked.

S&F Modular metal flush box 12 module, ISI marked.

S&F in repair baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 1x18WH warm white with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 2 feet, 1x10 WH warm white with accessories internall prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair Ceiling light 36 W 2X2 ft recess mounted led ultra slumceiling light with extruded aluminum housing and milky diffuser LED ultra slim panel complete all as specified and directed.

S&F in repair Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by engr-in-charge.

S&F in repair LED lamp suitable for 12 watts, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply.

S&F in repair 16 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

Supply & Fix ISI marked 40 Amp, 30mA, 230V, DP RCBO, conforming to IS:12640 (Part 2)-2016, having front face indication for earth leakage fault, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP20 protected lower terminals and sliding shutters, complete all as specified and directed by the Engineer-in-charge.

Supply & Fix MCB SPN 40 to 63 Amps, 240 Volts, C Series complete all as specified and directed.

S&F MCB SP 6-32 Amps, 10 KA rating complete all as specified and directed.

Supply and fix in replacement Submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing and caping of suitable size not less than 25 mm , ISI marked including 1 single core cable with stranded copper conductor of size 4 Sqmm (green colour) for earthing. Note : 2 runs of 4 Sqmm cable, 1 run of PVC Conduit and 1 run of 4 Sqmm cable shall be measured as 1 Run.

Supply and fix in replacement Submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing and caping of suitable size not less than 25 mm , ISI marked including 1 single core cable with stranded copper conductor of size 10 Sqmm (green colour) for earthing. Note : 2 runs of 10 Sqmm cable, 1 run of PVC Conduit and 1 run of 10 Sqmm cable shall be measured as 1 Run.

Supply & Fix in replacement MCB protected modular type AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plate, mini MCB SP 25 Amp capacity, fixed on concealed modular type metal flush box of suitable size complete all as specified and dir

ected.

S&F,install, Testing , commissioning of single phase auto clean wall mounted electric chimney, voltage 220 with touch control , black tempered glass, heat autoclean, control Gesture & 3 touch control, 2 x 1.5 W led lamp, filterless and oil collector of stainless steel with top of size 600 mm along with minimum 1350 cum Per hr suction power with rated capacity incl all necessary fixtures and fittings complete all as specefied and directed.

S&F aluminum flexible pipe for electric chimney exhaust of diameter 150 mm , length 8.5 - 10.0 feet after expension alogwith end cap/ cowl cover for exhaust pipe of suitable size including making round hole of diameter 200 mm in any type of wall and incerting PVC pipe 200 mm medium grade in round hole cutting portion only with packing including suitable size of clamps complete all as specified and directed.

Supply and fix in replacement hot water extension pipe made out of copper chromium plated 450mm long with brass adaptor and fixing in position complete all as specified.

Supply and fix in repair 450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specified.

Supply and fixing ceiling fans complete with aluminum blades, down rods with safety GI wire connecting up to fan hook, electronic regulator modular type and accessories , 230 volts , 1200 sweep. Min air delivery 245 CFM with service value 8.75 CMM/W with brushles diret current motor 28 W, minimum rated speed 350 RPM, No of speed -5, insulation resistance above 2 mega ohm, No of blade - 03 Nos, TDH below 10%, class B insulation, starting voltage 120 V maximum BIS certified and connecting up including provision of flexible 3 core copper cable complete all as specified and directed.

S&F in replacement Modular TV Socket ISI marked complete including flush box & cover plate and frame where required complete all as specified and directed.

S&F in replacement Telephone Socket RJ 45, ISI marked complete including flush box & cover plate and frame as specified and directed.

M&L for Rigid non-metallic medium grade ISI marked PVC conduit not less than 20mm dia and 1.2mm thick concealed in wall inclusive of boxes (junction/ terminal) all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth: for foundation etc or for manholes, laying of pipe in any type of soil and getting out complete all as specified.

Returning filling including spreading, leveling watering & well rammng in layers not exc 25cm thick complete all as specified and directed by EIC

Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & diected.

S&F HDPE of Pressure rating 6kg/cm sq pipe of 40 mm dia including necessary bends,elbows,Tees etc on cable protection complete all as directed.