ADDN/ALTN OF THE TOILETS AND OTHER CONNECTED PATEINT CARE FACILITIES AT BASE HOSP UNDER GE EAST DLEHI CANTT 110010

Amount

Taking down cement/grit plaster brick wall or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. & removing debris out side MoD land Complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris out side MoD land Complete.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work etc complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors,apron etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes etc complete all as specified and directed.

M&L for Non skid ceramic tiles 7mm to 8mm thick Ist quality ceramic coloured of area exc 0.11 Sqm but nexc 0.18 Sqm (400x400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles all as specified and directed

M&L for Coloured glazed ceramic tiles of 600 x 300 x 7mm thick and 450 x350mm size 7-8mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L for cement concrete 1:2:4 type B0 (25mm thick) using (12.5 mm graded stone aggregate) as in levelling courses all as specified and directed.

M&L 20 - 25mm thick machine cut kota stone flooring laid over and including screed bed or bedding layer mortar 20mm thick in cement mortar 1:4 for laying floor finished jointed and pointed with grey cement slurry mixed with pigments to match the shade incl all grade rubbing complete all as specified and directed.

M&L for rubber molded Cement concrete PU coated chequered tiles 300X300X25 mm thick with grey cement & pigment, set & jointed including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed. . (Make : Ultra, Unistone, Duracrete)

M & L for Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified by Engr-in-charge

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and as directed.

supply & fixing false ceiling with fully perforated 12mm th micro tegular edged or 10mm tk square edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge

Demolition of brick work built in cement mortar of any description and including disposal of all debris and complete all as specified and directed.

M & L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed

M & L 15 mm thick rendering in cement mortar (1:6), on brick or concrete wall surface, finished fair & even without using extra cement complete all as specified and as directed.

M & L 5 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Oil Bound Distemper on plastered and other surfaces with alkali resistant priming pain complete all as specified.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of Oil Bound Distemper on plastered and other surfaces with alkali resistant priming pain complete all as specified.

S & F in repairs Vitreous china floor/wall mounted WC ( Cascade) one piece type (off white) complete including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent as per approved make list).

S&F as in repair vitreous china squatting pan Orissa Pattern, size 580 x 440mm white with integral foot rest all as specified.

S&F as in repair Wash down water closet (Pedestal pattern) using vitreous china with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern ), complete with & including Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, Plastic water closet seat, white, recessed bottom pattern including seat cover and mild steel chromium plated or aluminised hinging device

S&F as in repair Vitreous China urinals, half stall type complete including providing and fixing plugs,waste coupling, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe using vitreous China Urinal, Half stall type, white with & including waste pipe etc complete all as specified.

S&F in repair 15 mm CP Brass Urinal spreader with Hex heavy quality for urinal complete all as specified and directed.

S & F in repairs for Brass chromium plated bottle traps 32mm for wash basins & urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed with concealed PVC pipe of 32mm/ 40 mmm dia.

S & F 32 mm dia waste Pipe, for whb & urinals complete all as specified and directed.

S&F basin/ urinal partition of size 900x450 mm curved shaped with frosted glass 8-10mm thick with chrome finished and all necessory fittings complete all as specified and as directed.

S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. (Make: Hindware /Parryware /Cera 0r equvalent)

S&F as in repair wash hand basin viterous china, white, flat back 550 x 400mm including CI bracket and cutting for and pinning in ends of brackets etc complete.

S & F repair white wash basin with full pedestal of size 560 x415 x 820 mm complete all as specified and directed .Make prayag/cera/parryware/Hindware

S&F as in repair oval type wash hand basin China of 560x410mm size, fixed in stone/granite complete.

S & F as in repair 32 mm dia Waste fittings, brass, chromium plated for wash hand basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

S & F ready made wall / floor mounted Vanity box made of HDHQtn Attach board, both side laminated and front side melamine surface, consisting of the following combination :- (a) Wash Hand Basin 620 mm x 460 mm including brass waste cupling and waste pipe (b) Base Cabinet 585 mm x 445 mm x 480 mm. Make : Hindware - DTC brand (Element Soft OAK color) or equivalent make as per approved make list)

S & F PVC connections 15 mm size with PTMT nuts both ends including PVC washers of length 450mm

S&F Pillar taps with swan neck, cast copper alloy, with capstan heads, chromium plated, Fency type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Make:- Jaquar or equivalent

S&F in repairs insheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S &F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges all as specified. Make:- Jaquar/equivalent

S & F for 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.Make:- Jaquar or equivalent

S & F as in repair 15 mm bore chromium plated fancy type two way bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. (Make:- Jaquar/equivalent)

S&F15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union.

S&F as in repair Grating doom 125 mm dia with waste hole of ptmt/fency type.(Minimum weight 40gms)

S&F in repair 15 mm bore chromium plated fancy type stop valve with long shank and cup(concealed type) Make:- Jaquar or equivalent

S&F CP grap bar 300mm dia compete all as specified and directed (Make : Prayag or jaquar/equivalent)

S&F as in repair CP soap dish compete all as specified and directed (Make : Prayag or jaquar/equivalent)

S&F as in repair CP health faucet with 1 mtr flexible tube and hook compete all as specified and directed (Make : Prayag or jaquar/equivalent).

S&F as in repair CP paper holder fixing to wall with ss screw compete all as specified and directed (Make : Prayag or jaquar/equivalent ).

S&F as in repair Chromium plated shower roses with swivel joints, 65mm size, including fixing to steel pipe or union Make:- Jaquar/equivalent

Dismantling of CI pipes/PVC pipe & fitting of any description & position up to 110 mm dia complete all as specified & directed.

S&F as in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) out let dia 75mm complete.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls using PVC clamp suitable for 110mm bore PVC (SWR) pipe complete.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls using PVC clamp suitable for 75mm bore PVC (SWR) pipe complete.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete.

S&F PVC (SWR) bends 75mm bore any radius with access door including jointing with solvent cement complete all as spd.

S&F PVC (SWR) bends 110mm bore any radius with access door including jointing with solvent cement complete all as spd.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm bore with access door including jointing with solvent cement complete all as spd.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified.

Taking down chowkats or frame(W/o taking off shutters from the frames) n. exc 1.50 sqm each .

All as per item No 61 above but exc 1.5 Sqm but n.exc 4 Sqm

S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, tower bolt, handles, MS wire mess, 5 mm thick frosted glass etc, complete all as specified and directed.

S&F powder coated aluminium of various section as required for frame of windown/ventilators etc with one or more rebates including jointing cleats for fixing etcetc. all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2Nos.) suitable handle (1 No) complete all as specified

S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle exc 0.5 sqm each pane coloured and fixed with glazing pins and rubber beading etc in alum window/ventilator/door/partion etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F aluminium Powder Coated grill with and including suitable aluminium anodised frame including V - beading at all edges as requird manufactured by M/S Decogrill as per design No DG- 104 or equivatent 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F 100mm size stainless steel butt hinges fixed with stainless steel screw complete.

S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F 100 mm size extruded aluminium alloy handles, cast type anodised.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store

S&F 25 mm OD CPVC pipes SDR 11 and concealed & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

S&F 20 mm OD CPVC pipes SDR 11 with concealed & Brass fittings ( incl Brass Elbow ,Brass Elbow (3/4 X ½) mm,Brass Tee,Male Brass Threaded Adaptor (MTA/ MBTA),Female Brass Threaded Adaptor (FTA/ FBTA,Brass Union,) for all points on walls/ ceiling or laying in floors complete all as specified and directed.

S & F PP-R Ball valves (brass insert OD 25mm) as per requirement of the site complete all as specified and directed.

Providing water proofing treatment with five layered 4mm thick APP (Atatic poly propylele) modified bituminous membrane re-inforced with non woven polyster mat of weight 180 gms/sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythlene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 kg / sqm over roof and finishing the treatment with one coat of bitumen of grade 85/25 @ 1.2 Kg per Sqm Notes :-(i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer APP membrane. (iii) The quoted rate incluide one coat of bitumen of grade 85/25 @ 1.2 Kg per Sqm & two coat of Aluminium paint over APP membrane.

M&L for applying two coat of aluminium paint over APP membrane. ( An overlap of 100mm & 150mm shall be provided on sides ends respectively) complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing etc. capacity of tank Exc 1000 & N.exc 2000 ltr cap

Dismantling water tanks including ball valve and all other connection cap exc 500 ltr but n.exc 1000 ltr and removing from site complete all as specified & directed by Engg in Charge.

Dismantling water tanks including ball valve and all other connection cap exc 1000 ltr but n.exc 2000 ltr and removing from site complete all as specified & directed by Engg in Charge.

S & F 1000 litres capacity rotaional moulded polythene water storage tanks triple layer ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-I incl one 20MM ball brass valve with polythene float and fly nut complete all as specified and directed

all as item no. above but for 2000lit.

S & F nipple suitable for HDPE water tank.(Minimum weight 20mm-45gms ) complete all as specified and directed

S&F in repair 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (framed work) complete all as specified and as directed.

S&F in position Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutter, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F steel work in tubular column, purline, rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.

S&F mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.

M&L preparation of new steel surface over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6, type C-2, using (40mm graded stone aggregate) as in plinth protection and finished the surface even and smooth without using extra cement, laid in panel, including filling the joints with sand mixed with bitumen in 1:1 ratio complete all as specified and as directed.

M&L for chipping of spalled and loose concrete and cleaning rust from reinforced by sand blasting scrubing down concrete surfaces with wire brushes cleaning with water allow to dry and applying a layer of Zn rich epoxy primer as an antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2 mm dia of wire and apprature 75mm,total thickness of guniting n.exc 40mm(avg thickness) in cement mortar 1.2 using OPC 53 Graded cement mixed with polycreate mixture@2% by weight of cement or as per manufacture instrs and finally applying cement plaster over guniting surface of reqd thickness to give even uniform and smooth finishes confirming to proper geometrics in cement mortar 1:3 to match the existing surfaces as in sides ,soffits of the slabs,chajja,fins,fascia,parapet,lintels,column,and beam etc complete incl necessary scaffolding,shuttering,chasing to bk work removal of all small trees/shrubs etc.complete as per directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil.

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil

S& F in repair 75mm thick factory made SFRC manhole/ drain covers of approved shape & size complete all as specified and as directed. Make : Polycrete or equivalent.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting and unloading the same at C & D Waste Management Site near Jahangir Puri Safai Karmchari Quarters including weighing at plant etc.Weighing and unloading at the plant shall be as per procedures/rules of the Plant Management. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C & D Waste plant. The processing fee of C & D Management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts.

Taking down copper/aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and as directed.

M&L for point wiring concealed type with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC Concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box,modular white cover plate with frame, blanking plate etc suitable for upto required module etc complete and making good disturbed surfaces to match the existing for one light / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed.

All as per item No. 104 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable,on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.

S&F in repalacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed.

S&F in of modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F of Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

S&F in replacement Bldg security light fitting LED 35 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with electric connection with suitable size of PVC insulated copper wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed.

Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

S & F in replacement Heavy Duty Metallic Ventillation Fan 380 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed.

M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mm bore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

Supply and fixing in of five star rated Geyser capacity 25 ltr , Electric Driven , Single phase , 240V ,Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff, manual temp setting, maintaining 8 bar pressure including electric and water connection with hot and cold water connection pipe ( PVC Type ) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolt complete all as specified and directed.

S & F in replacement for distribution board double door type, SPN, 4 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in replacement for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in replacement for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in replacement MCB DP, 240 Volts, 63 Amps complete all as specified and directed.

S & F in replacement MCB SP, 240 Volts, 10 Amps complete all as specified and directed.

S & F in replacement MCB SP, 240 Volts, 25 Amps complete all as specified and directed.

Taking down old and unsv UG Cable complete with all aspect all as specified and directed by Engg-in-charge.

Material and labour for river washed and screened , dry sand for filling in trenches below and around underground cables for cushioning of cables etc complete all as specified and directed. Note :- Punned thickness will be measured for payment.

Taking out old bricks and S&F sub class B bricks having minimum compressive strength 75 Kg/sqcm laid in trenches for cable protection etc complete all as directed by Engg-in-charge.

Supply, laying and testing of 2 core 06 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed.

Supply, laying and testing of 2 core 10 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed.

Adhunik Builders (BID ID -3398017)

Singh Associates (BID ID -3397786)

Shivom Projects Private limited (BID ID -3398224)

J.P. Enterprises (BID ID -3390213)

M/s M M BAHL (BID ID -3389845)