Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3.6 L
Closing Date
11 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
3 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- AMC of electronic and/or software embedded equipment of similar make by OEM of the equipment or authorized dealer / vendor of OEM. Note: The capacity and capability of Authorized dealer / Vendor of OEM shall be approved by RDSO.
51 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Instructions and conditions to Tenderers :
Every tenderer shall state in the tender his postal address fully and clearly. Any communication sent in time to the tenderer by post at the said address shall be deemed to have reached the tender duly and in time. Important documents shall be sent by Registered post.
In case of any information/certificates submitted by tenderer is found to be false/forged or incorrect at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of EMD/SD and Performance guarantee besides any other action provided in the contract including banning of business for a period of upto five year.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.
If the bidder (any member in case of JV/consortium) must not have suffered bankruptcy/ insolvency during the last 5 years. The Bidder should submit an undertaking to this effect as part of the bid.
Bidders must not have a conflict of interest. Following shall be considered as conflict of interest in this bidding process :
If a Bidder or her associates/affiliates (inclusive of parent firms) has been engaged by the Employer (Railways) to provide consulting services for the preparation related to procurement or on implementation of the project;
Comprehensive Annual Maintenance Contract of G G TRONICS make HASSDAC for a period of 02 ( Two) Years in Rangiya Divisio.
RN-ST-20-2026-27~NFR
RN-ST-20-2026-27
Open
Works - General
24 Months
Kamrup, Assam
₹0
₹3.6 L
14 Aug 2026
14 Aug 2026
28 Aug 2026
3 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,79,35,706.88 | ||
| Number-Month | 1296.00 | — | — | ||
| A comprehensive annual maintenance of High Availability Single Section Digital Axle Counter (HASSDAC) of G.G.Tronics make installed over Rangiya division. This work includes preventive maintenance, testing, checking, repair/ replacement of all defective cards/modules/subsystem/parts of all hardware and peripheral equipments as per scope of work. (Qty 54 sets for 24 months= 1296 sets for 24 months) & (Item Qty .Unit 'Number- Month' stands for Per Set Per Months) | — | — | — | 1,79,35,706.88 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2026_08_12IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_12_compressed.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
JPOCablelaying.pdf
ATTACHMENT
2.0TenderForms.pdf
ATTACHMENT
3.0ChapterVI-VII.pdf
ATTACHMENT
4.0MakeInIndia.docx.pdf
ATTACHMENT
FORMATFORWORKCOMPLETIONCERTIFICATE_1.pdf
ATTACHMENT
ACS-1to11_compressed.pdf
ATTACHMENT
1.1TD-AMCGGtronics.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].