Electrical Installation work

Supply of 1.1KV gr. 4 Core 95 mm² XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] (Main Panel to VTPNDB)

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

S/F 4 Core 95 mm² brass compression type gland & finishing the end of following sizes PVC cable/Al. with dowells solderless socket by crimping method as per GS:-

Supplying & fixing 65 mm medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Supply & Fxing Double Door Type 8 Way Vertical TPN PDB in S.S. enclosure with IP-42/43 protection (Cat no 6079 14) on wall consisting with 1 no 160 A., 4-Pole MCCB (36KA, 420096) as incomer,,8 nos. 63A. TP MCB as outgoing. and both side cable end box in wall embedded complete with all connection with suitable size of Cu. wire with proper socketing as per direction of E.I.C. (Make:-Legrand/L&K/Seimens/ABB ) (for Academic Building & New OPD Building.)

Supply & Fxing Double Door 6-Way TPN MCB DB in S.S. enclosure (min 1.5mm thick) with IP-42/43 protection flushed in wall consisting with 1 No. 63 A. 4-Pole MCB as incomer & 18 nos., 16 - 32 A. SP MCB as outgoing, complete with DIN Channel, Neutral Bar, Earth Bar , both side cable end box in wall embedded and other accessories & connection with suitable size of Cu. wire with proper socketing incl. necsy. earthing attachment. (Make:-Legrand/L&K/Seimens/ABB ) (for Academic Building.)

Supply & Fxing Double Door 2+6 Way SPN MCB BDB comprising with 1 No. 250V. 40 A. DPMCB and 6 nos. 250 V. 6 - 16 A. SP MCB as outgoing, complete with DIN Channel, Neutral Bar, Earth Bar and other accessories on angle iron frame on wall, incl. necsy. earthing attachment as per direction of EIC. (Make:-Legrand/L&K/Seimens/ABB )

Distribution wiring in 3x1.5 sqmm single core PVC insulated stranded Copper wire in 19 mm in black stove GI conduit to 3 pin Plug Points incl. S&F 5 A Piano Key type switch with earthing attachment and painting (Average run-7.5 Mtrs)

Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supplying and Drawing 1.1 KV single core stranded 'FR'LSH PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 25 mm dia Rigid conduit pipe and making necy in Damage goods , connection as required(make- Finolex/RR Kable/KEI)

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) (VTPN to PDB)

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm)(VTPN to ODU)

Supplying and Drawing 1.1 KV single core stranded 'FR'LSH PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 19/25mm dia GI conduit pipe and making necy inDamage goods ,& GI Coduit Painting . connection as required(make- Finolex/RR Kable/KEI)

4 x 6 & 2 x 4 mm² from (VTPN to AC Timmer/Starter )

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm)(PDB to Computer Board & AC indoor Unit.)

3 x 22/0.3 (1.5 sqmm) for separate plug

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm)

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm)

3 x 22/0.3 (1.5 sqmm)

Supply and Delivery of 4 feet Industrial box type single LED tube fitting incl. Supply & Delivery of 1 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply and Delivery of 4 feet Industrial box type twin LED tube fitting incl. Supply & Delivery of 2 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 105 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no.20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing of 240V 12W recess mounted round LED downlight having following wattage, in white powder coated pressure die cast aluminium housing with glare free uniform illumination, suitable for 2' x 2' grid ceiling with CCT (5700K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

S&F of Input voltage 230V, 15 Amp, Single Phase and Sensing Output 2 wire type, to be attached to Magnetic Switch NO type for a Single flap Push Pull Door (Model PS 910 MNO) Air Curtain of following Specification (Make: Mitzvah/Mitsubishi Electric/Aerodyne/ Euronics) 4.0 ft. of Air Velocity 13 Mtr./Sec.

S & F 415V 32A Timer controller for AC Machine in SS double door 4-way/6Way TPNDB enclosure (Make:- L&T, encloser cat no DBTPE004DD or equvalant) with S&F following electrical accessories & front door locking arrangement with all connection incl. earthing attachment on wall as per direction of EIC :- i) 32A TPNMCB (LT make cat no BB40630C) --- 1 No ii) 24 Hr programmable Digital/Analog Timer (LT make cat no 67DDT0) ---- 1 No iii) 4 pole power contractor (LT make cat no MNX 50/415V) with 1 NO +1 NC additional contact block ---- 2 set iv) 20A Auto-Off-Bypass SPDT toggle switch Approved/reputed make) ---- 2 No. v)Four nos. indicating lamp for on/off. (Approved/reputed make) vi) Four nos. On & Off push bottom switch.(Approved/reputed make) vii) 2 nos 4pole 32A Contact Terminals.(Approved/reputed make) (For Uro & Nephro Building & WIC )

S & F 250V 25A Timer controller for AC machine in SS double door (IP 42/43) 2+10-way DB enclosure (Make:- L&T/Schnider/ABB Elegance) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- i) 10kA, C-Curve, 240V, 25A DPMCB (LT/Schnider/ABB Elegance) --- 1 No ii) 24 Hr programmable Digital Timer (LT make cat no 67DDT0) ---- 1 No iii) 3 pole power contractor (LT make cat no MNX 22/230V) with 1 NO +1 NC additional contact block ---- 2 sets iv) 2 Moduler AC motor stater (Make:- Legrand/Myrius) ---- 1 No. v) 2 Module plate with cover (Make :- Legrand/Myrius) -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch (Approved/reputed make) ---- 2 Nos. vii) 10A SPST Moduler type switch (Make :- Legrand/Myrius) - 1 No. viii)Outgoing connector make ELMAX (Approved/reputed make) - 2 Nos (Twin timer) (for BIN OPD FCU unit).

Add: GST 18%

Add: LWC @1%

Make & model of each and every material to be approved by EIC.

Defect Liability Period - 1 (One) year