CIVIL WORKS FOR TOILET WORKS IN LOOM SECTION ALH FA AT HELICOPTER DIVISION, HAL, HC

Name of the Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

MSME Registered Firm: YES/NO

Size Of Firm ( Infrastructure ): MICRO/SMALL/MEDIUM/LARGE

Owner Of Firm: SC/ST/WOMEN/SCST WOMEN/OTHERS

Address for correspondence:

PAN No.:

PF Registration No./ Code:

ESI Registration No./ Code:

Goods and Service Tax Registration No. (GST No)

Contact details

Registered Contractor

Related Document to be Uploaded to eProcurement Portal * Category: E=75 Lakhs-Less than 100 lakhs F=50 Lakhs-Less than 75 lakhs G=25 Lakhs-Less than 50 lakhs H=10 Lakhs-Less than 25 lakhs I= 5 Lakhs-Less than 10 lakhs J= 2 Lakhs-Less than 5 lakhs K= Less than 2 Lakhs

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rupees

Audited Report duly certified by the Chartered Acountant to be enclosed to support the turn over .

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

Related Document to be Uploaded to eProcurement Portal

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Tender Document Cost and EMD details

Related Document to be Uploaded to eProcurement Portal

Validity Of the Offer

If not agreed please mention Validity Period

Acceptance of Work Completion Shedule

If not accepting, deviaton to be mentioned in detail

Acceptance of Tender Scope,Terms & Conditions

If not accepting, deviaton to be mentioned in detail

Statutary Reqirments

If not agreed the offer will be rejected

Details of Daviations if any

Tender Clause Refernce

DECLARATION

Description

Dismantling C.I. or asbestos rain water pipe of 100 mm dia with fittings and clamps including stacking the material within 50 metres lead including all lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per the directions of the Engineer in Charge of the work.

Demolishing brick work (in cement mortar) manually/ by mechanical means without causing any damage to the surroundings including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge.

Providing and laying in position reinforced cement concrete of 1:1.5:3 grade 4 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases etc, above plinth level up to floor five level excluding the cost of centering, shuttering and reinforcement but including curing, carriage for all leads; hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per the directions of Engineer in Charge of the work.

Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases for columns etc. The rate quoted shall include all lead, lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per the directions of the Engineer in Charge of the work. Note : Form work material contractors own property and shall be removed after completion of work.

Suspended floors,roofs,landings,balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Supplying, fabrication and fixing in position of TMT reinforcement bars of grade Fe-500D or more for R.C.C work upto plinth level including straightening, cutting, bending, hooking, cranking, placing in position, lapping wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including all lead and lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc.., all complete as per directions of the engineer in charge of the work.

Providing and laying autoclaved aerated cement (AAC) blocks masonry with 150mm to 300 mm thick with grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing and rendering plastering in Cement mortar (1:6) of 12 mm thick over brick work/block work/concrete surfaces and finishing the surface fair & even at any height. The rate quoted shall include all lead and lift, preparation of surfaces, curing of plastered surfaces, cleaning stains and dripping mortar from floors and walls etc., hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, cost of all materials,labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge.

Providing & fixing of Long pattern W.C Pan of size 580x440 m White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) withW.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Providing and fixing 75 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Etc., complete as directed by EIC.

Providing and fixing 110 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Etc., complete as directed by EIC.

Providing and fixing White Vitreous China Wash basin size 630x450 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.

Providing and laying matt/antiskid Vitrified tiles of size 600 x 600 mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. The rate quoted shall include all lead & lift, hire charges of machinery and equipments, cost of all materials, labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge. Note: Colour/Shade/Sample shall be approved by EIC/OIC.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. The rate quoted shall include all lead and lift, preparation of surfaces, curing of plastered surfaces, cleaning stains and dripping mortar from floors and walls etc., hire charges of machinery and equipments, cost of all materials,labour charges and all other incidental charges etc., all complete as per directions of the Engineer in charge.Note: Colour/Shade/Sample shall be approved by EIC/OIC.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineerin-charge.

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug, Kiln seasoned and chemically treated hollock wood etc. including priming coat complete.

Providing and fixing ISI marked 30mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including necessary ISI butt hinges and necessary screws etc., complete.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) of length 150mm long with necessary screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing brass bib cock of approved quality , 15mm nominal bore etc,. all complete as directed by EIC.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre etc., complete as directed.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved all complete as per directions of the engineer in charge.

Providing and laying Brick work in position with Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :4 coarse sand) including all lead and lift, hire charges of machinery and equipments, charges for providing & removing scaffolding wherever required, racking out joints 10mm deep to receive plaster, curing, cost of all materials,labour charges and all other incidental charges etc., all complete as per directions of the EIC.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing PTMT bib cock 15mm nominal bore, 86 mm long, weighing not less than 88 gmsof approved quality and colour.., all compelte as directed by EIC.

Supplying and fixing of toilet paper holder,C.P. brass make of branded manufacture fixed to walls with chromium plated brass screws, wall flange etc., all compelte as directed by EIC.

Providing and fixing PTMT towel rail 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings fixed to walls using screws and cup washers etc., all complete as directed by EIC.

Providing and fixing PTMT grating 100 mm dia circular in shape of approved quality and colour. etc all complete.

Cutting holes in common burnt clay F.P.S. (non modular) bricks up to 30x30 cm in walls including making good the same etc., all complete as directed by EIC.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., all complete as directed.

Providing and fixing aluminium hanging floor door stopper with Single rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. all complete as directed by EIC.

Providing and fixing chromium plated brass handles of length 125 mm with necessary screws etc. all complete as directed by EIC.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

ELECTRICAL LED Light fixtures Supply, Installation, Testing and commissioning of 20W LED Light Fitting.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.

Wiring for light point Lighting Point wiring Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm Fire resistant LSZH/ low smoke HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. Fire resistant LSZH/ low smoke HFFR PVC insulated copper conductor single core cable etc as required.

Single lights Points

Two light Points

Exhaust/Wall mounting Fan points

Wiring for submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

3X2.5 Sq.mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6ASwitch

16A Switch

3 pin 6A Socket outlet

16A Switch

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

3 Module

8 Module

Approximate Amount put to the tender (Basic)