Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹29,610
Closing Date
28 Nov 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
AEE-1
Tender for increasing the Vertical Clearance by providing intermediate tower in existing corridor of 66 kV DG-3 & DG-4 D/C Lines between Tower number 70 & 72 by providing 1 No of new proposed 110kV DA plus 3 NBT, KPTCL Design Tower near Hirandanahalli Lake in TLM Sub Division Hoody Bengaluru in the Tr M BMAZ South Circle Bengaluru
KPTCL/2024-25/EL/WORK_INDENT1461/CALL-9
KPTCL/2024-25/EL/WORK_INDENT1461/CALL-9
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Transmission And Mantainance Circle BMAZ South Bengaluru
21 documents required · 21 mandatory
The bidder should have satisfactorily completed in the last five years at least one work of Construction of Stations/Transmission Lines/ Erection of Towers/Maintenance or rectification work of EHV Transmission lines/ One Terminal Bay of 220KV class or above voltage class on Total Turn Key, Partial Turnkey basis for the last five financial years in KPTCL/PGCIL/NHPC/NTPC/ any Govt., or public sector under takings
Bidders shall submit audited financial reports for last five years preceding the date of bid submission duly certified by Registered Charted Accountant
performance certificate duly signed by competent authorities not below the rank of the Executive Engineer Electrical, which shall be in satisfactory service for a period of One year prior to date of submission of the Bid. Scanned copy of the supporting original Documents shall be uploaded
The Bidder should possess valid Super Grade Electrical Contractors License issued by the Government of Karnataka as on the date of Bid Submission. In addition, the bidder should have the following qualifying requirement (Technical)
Bidder shall have adequate knowledge of Sub-stations and Transmission lines design procedures including quality control and shall have infrastructure and erection facilities and capacity to execute the works
Bidders shall submit audited financial reports for last five years preceding the date of bid submission duly certified by Registered Charted Accountant. Minimum Average Annual Turnover (MAAT) of the bidder for best three years out of last five financial years ending on March or December as the case may be, shall not be less than Rs 44,41,250.00
Bidder shall be financially sound. Bidder shall submit audited financial reports for last five financial years preceding the date of bid submission, duly certified by the registered charted Accountant
Valid Labour License issued from the competent authority
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years
The Bidder must not have Black listed by ESCOMS/other electrical utilities/who are in the business of distribution of power
Certificate is to be uploaded by the Bidder agreeing to source the equipment/material for the work from the approved vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as specified in Annexure XVIII of the tender documents
List of works for which tenders already submitted
For executing the above works the contractor should have the necessary skilled men with tools and tackles. List of technical staff &tools and tackles to be uploaded in Techno commercial sheets Self declaration for works on hand
Self declaration regarding Risk & cost
An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per the QR for vendor registration, available in the KPTCL website
Upload the self declaration letter regarding land border
₹750
₹29,610
30 Oct 2025
30 Oct 2025
1 Dec 2025
6 Nov 2025
Tender for increasing the Vertical Clearance by providing intermediate tower in existing corridor of 66 kV DG-3 & DG-4 D/C Lines between Tower number 70 & 72 by providing 1 No of new proposed 110kV DA plus 3 NBT, KPTCL Design Tower near Hirandanahalli Lake in TLM Sub Division Hoody Bengaluru in the Tr M BMAZ South Circle Bengaluru
Check survey using their own equipment
Fabrication, galvanizing and supply of MS tower materails for 110kV DA plus 3 NBT KPTCL Design Tower with stubs suitable for Coyote ACSR conductor and Zero dot 5Mts Stub Chimney extension Since tower...
Supply of galvanised Bolts and Nuts
Tower Accessories Number Plates
Grounding of tower including the cost of 40mm dia 2 dot 5mm thick class C GI pipe of 3mtrs length with 50 into 6 mm GL flats 3mtrs long, salt charcoal, including excavation charges
Conductor Coyote ACSR for Plain Terrain
7 bar 3 dot15 mm GI Wire for Ground conductor
90kN Disc Insulators Provision made for double string insulators 5 Plus 5 into 6 equals 60Nos 10 Discs per String
Double Suspension clamp of 5 Plus 5 units of 90kN Disc Insulators each along with hard ware for Coyote ACSR and arcing horn
Hardware for Conductor M S C Joints suitable for Coyote ACSR
Repair sleeves suitable for Coyote ACSR
Vibration dampers for Coyote
Single suspension clamps for Ground Conductor
Setting of stub templates and aligning dismantling and transportation of templates from one location to another location
Sorting of Tower parts made of fabricated angle iron Sum of all the tower weights
Assembling and erection of towers including tightening of bolts and nuts including loading unloading at store and site Including weight of stubs
Welding of bolt and nuts 400Nos Bolts Nuts
Stringing of Existing and New Coyote paying out conductor from anchor to anchor normally
spaced at 5 spans with 4 tangent towers in ...
Releasing of Existing Coyote Paying out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jointing of con...
stringing of new ground conductor 7 bar 3 dot 15 mm earth wire without allowing the conductor to touch the ground and without damaging the conductor.
A For Plain terrain including fixing of earth wir...
Releasing of existing ground conductor For 6 complete spans from Tower No 68 DB plus zero to Tower No 74 DB plus zero 220 plus 305 plus 295 plus 300 plus 290 plus 280 equals 1690Mtrs
Supplying and fixing GI Angle iron 45 into 45 into 5mm 1 m length with cleats bolt & nuts as per specification and fixing above zero dit 5 m length each at inner and outer surface of the tower to faci...
Supplying and fixing of barbed wire as per specification
a Fixing of Danger boards
b Fixing of Number plates
c Fixing of Phase plates.
d Fixing of Cuircuit plates.
Grounding of tower including the cost of 40 mm dia 2 dot 5mm thick class C GI pipe of 3 mtrs length with 50 into 6 mm GL flats 3 mtrs long salt charcoal including excavation charges
Dismantling existing 66kV DA Plus 3 Existing Tower No71 without stub 1.2 MT Labour portion for dismantling of towers
WBC- Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, a...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Documents Upload.zip
Tender Document • 0.52 MB
Technical Specifications.zip
Technical Information / Worksheet • 3.87 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .