Loading…
Loading…
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
11 Jun 2026, 9:00 am6d left
Divisional Engineer
Divisional Engineer Mansa PWRMDC Division Mansa
Estimate for Lining/Relining by laying of w/c of O/L RD 4050-TF of Kotra Minor 6 of Village Khandebad of District Sangrur(Slice-III) (Laying and Jointing of RCC UGPL system and other allied works in construction watercourse)
2026_WR_169119_1
16 of 2026
Open Tender
Civil Works
180 days
KHANDEBAD
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
₹70,000
Yes
Mansa
1 Jun 2026
1 Jun 2026
11 Jun 2026
1 Jun 2026
11 Jun 2026
1 Jun 2026
5 Jun 2026
Project in-charge
Work Manager/Site Engineer
Engineering Graduate
PUNJAB WATER RESOURCE MANAGEMENT & DEVELOPMENT CORPORATION
Name of Constructor/Agency/L & C Society
Name of the Work
Truck/Tractor with trolley
Water Tanker
Sheep foot roller
Mortar tank
Soaking tank
Standard measuring box 1’ x 1’ x 11/4’ depth
PUNJAB WATER RESOURCES MANAGEMENT & DEVELOPMENT CORPORATION LTD.
SCHEDULE (D) (Summary of Experience of Agency/Contractor/L&C Society for similar nature of work)
Name of the Contractor / L&C Society
Name of the Work
Please fill information about the each relevant work completed during the last Five years for works Costing more than Rs._________________
Name of Employer
PUNJAB WATER RESOURCES MANAGEMENT & DEVELOPMENT CORPORATION LTD.
PRE-QUALIFACTION SCHEDULE (E) AFFIDAVIT
1. That I have submitted a bid for execution of work relating to"
in response to NIT issued by the
2. That all information given in the pre-qualification schedule forms and in the attachments are true and correct.
3. That the undersigned hereby authorize (s) and request (s) any bank/person/firm or corporation to furnish pertinent information required by the Deptt. deemed necessary regarding my (our) competence and general reputation
4. That the undersigned understands that if any further qualifying information shall be required I/We agree to furnish such information at the request of department/project/implementing agency.
PUNJAB WATER RESOURCES MANAGEMENT & DEVELOPMENT CORPORATION LTD.
SCHEDULE (F) ADDDITIONAL INFORMATION
Name of the Work
The bidder can add here any further information relevant to the evaluation of their pre-qualification bid :-
PUNJAB WATER RESOURCES MANAGEMENT & DEVELOPMENT CORPORATION
MANSA PWRMDC DIVISION, MANSA
Estimate for Lining/Relining by laying UGPL of w/c of O/L RD 4050-TF of Kotra Minor 6 of Village Khandebad of Distt Sangrur (Slice-3) (Laying and Jointing of RCC UGPL system and other allied works in construction watercourse)
DNIT 16/2026 Dated 01/06/2026
Name of Firm
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic,night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Earth work excavation in foundation,trenches etc.in all kinds of soil where pick jumper is not involved & not exceeding 2 mtr. depth including dressing of bottom & sides of trenches taking the excavated soil clear from the edge of the excavation.
First class burnt brick laid in cement sand mortar 1:6 for bed and side wall [Item No 11.3(i)].
10mm thick cement plaster 1.4 on sides walls (-) Rs.1.25/- for scaffolding.
10mm thick cement plaster 1:4 on bed and top.
Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement (CSR Item No 10.13 (a) (i)
Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle
Cement concrete 1:4:8 with brick ballast 40mm gauge
Lowering, jointing and cutting of RCC pipes 600 mm dia for vent pipe into Trenches and laying same to correct alignment ( @2.50 metre / No)
Lowering, jointing and cutting of RCC pipes 150 mm dia for vent pipe into Trenches and laying same to correct alignment ( @2.50 metre / No)
Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank.(CSR 2020 Item No.18.4)
Providing & fixing M.S. foot rests made of 23x25 mm square bar including fixing in Haudis complete with cement concrete 1:2:4 (CSR 2020 Item No.29.35 )
Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) DIA-600 mm
Centreing & shuttering for Concerte faces
Providing and fixing of Steel Shutter Gates Assembly in Main Pipeline complete in all respects Dia-600 mm
Dismantling of Brick work in Cement, CSR 2020 - item no- 8.5 (b)
Any Other Item
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
TB01.xls
Tender Documents • 0.05 MB
4050-TFBoqPipeSlice3.xls
Additional Documents • 0.05 MB
Download all tender documents and submit your bid