Repairing and renovation and of outdoor illumination arrangement at P.H.No. I and II under Kaniara W/S Scheme under EMSD-I, P.H.E.Dte. Dist.- 24PGS(N).

Amount

FOR P.H.NO. - I Dismantling the existing defective fixture after disconnection of all electrical connection by deploying skilled personnel & kept at site all complete as per direction of E.I.C.

Fabricating module arm made up from MS for installation of 03 Nos. solar module and LED luminaries on supplied GRP Street Light Pole as in item no. 1.00 including single coating red lead primer and double coated aluminium painting as per direction of EIC.

Supply and fixing of integrated Solar 15 Watt LED street Light in Aluminium Extruded enclouser IP65 with built in Mono or Poly Crystalline panel, Lithium Ferro Phospate (LiFePo4) battery, MPPT Charge Controller and PIR Sensor with Colour temperature between (5500-6500) degree K having following minium specification on top of tubular pole.

Solar Panel 40W peak or higher, lumen otput:120 lumen/watt, vbiewing angle:120 degree or higher, RED LED for battery low, GREEN LED for solar charging, battery capacity 12 V, 18 AH or higher, autonomy 2 days, Expected battery life 2000 cycles, in built BMS for battery safety, maintenance free operating temperature of (LiFePo4 -10 deg. to +55 deg. c, High efficiency>90%, battery charging time not more than a day, Reverse polarity protection for battery & solar panel, over charge & deep discharge protection for battery, over voltage & over current protection from solar PV module, dusk to Dawn operation, cooling air natural.BIS/MNRE/IEC approved

FOR P.H.NO. - II Dismantling the existing defective fixture after disconnection of all electrical connection by deploying skilled personnel & kept at site all complete as per direction of E.I.C.

Supply delivery at site of 100 Watt LED Street light luminaire with pressure die cast aluminium housing ,heat resistant toughened glass with frame offering (IP-66) protection. (Make-Philips(Type-BVP 175 LED 110 CW 100W FG GR PSU )/CGL/Similar type of approved make)

Fitting fixing the fixtures as in item no. 6 in existing pole including making interconnection from pole box to fixture with 2.5 Sq.mm copper wire by supply fitting fixing of necessary fixing materials as per direction E.I.C.

Supply fitting fixing of 16A DP MCB with box.

Supply delivery at site of 1.1 KV grade 6 Sq.mm 2core Al.Ar. Cable. (Make-Gloster/Mescab/Polycab/Havells/any other approved make) Cable should be supplied as per site requirement.

Laying of above cable as in item no. 9 on wall/surface incl. S & fitting fixing of required nos. of MS saddles with earthing attachment , making holes etc. as necy. Mending good damages and painting all complete as per direction.

Finishing the end of cable as in item no. 9 by crimping method incl. supplying and fixing solderless socket , tapes, anticorrosive paste & jointing materials all complete as per direction.

Earthing the pole with ¾” inch dia x 6’ ft. long G.I. Earth spike along with 1 x 6 SWG G.I. wire, bolts, nuts and washers of suitable size driven up to a depth of 6.25’ ft. below G.L and restoring the surface duly rammed as per I.E. Rules and direction.

Testing commissioning the whole installation upto entire satisfaction of E.I.C.

Add: GST @ 18%

Add: CESS @ 1%

KARTICK BAL (BID ID -6825147)

KUNDU ELECTRICAL ENTERPRISE (BID ID -6816789)