SPL REP TO BLDG P-94 AT AP ALGARAH AND PROVN OF 01 TOILET AND 01 BATHROOM NEAR BLDG P-62 AND PROVN OF 01 TOILET BLOCK (04 SEATER) NEAR BLDG P-32 AND SPL REP TO BLDG P-61 (OR LIVING ) OF 1ST BN SIKKIM SCOUTS AT ALGARAH UNDER GE 867 EWS

Amount

Surface dressing n exc 15 cm deep soft/ loose soil, complete all as specified and as directed.

Surface excavation not exc 30 cm deep and averiging 15 cm deep and getting out in soft/ loose soil, complete all as specified and as directed.

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil, complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and as directed.

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose soil filling under floor, complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point, complete all as specified and as directed.

Demolition of precast concrete block walling and precast concrete articles etc, built in cement mortar, complete all as specified and as directed.

M & L precast cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) block masonry with solid blocks 10cm in and setting in CM 1:6, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for rough finished surface of flat concrete, complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M & L Reinforced cement concrete (Nominal mix) (1:2:4) type B1 (20 mm graded crushed stone ggregate) as in Beams, cantilevers, bressummers,lintels over 1.5m span, complete all as specified and as directed.

Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete, complete all as specified and as directed.

M&L mild steel deformed bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips, complete all as specified and as directed.

M&L mild steel deformed bars 5mm dia and over upto and incld 10mm dia in stirrups, spacer and binders (annealed not less than 0.90mm dia or securing with clips, complete all as specified and as directed.

M & L mild steel TMT Bars10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip), complete all as specified and as directed.

M & L mild steel TMT Bars 6mm to 8mm mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip), complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M/L for 10mm thick rendering CM(1:6) on other than fair faces of brick or concrete surfaces of internal walls finished even and smooth without using extra cement, complete all as specified and as directed.

M & L 10mm thick rendering on fair faces of brick work concrete surface in CM (1:4) on external wall even and fair with WPC and WPC mrasured separately, complete all as specified and as directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6), complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated, complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compond, complete all as specified and as directed.

M&L for Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty, complete all as specified and as directed.

M&L preparing plastered or unplastered new surfaces of wall and applying three coat of white wash, complete all as specified and as directed.

M & L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat or alkali resistant primer, complete all as specified and as directed.

M &L for preparing newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and as directed.

Fixing only of structural mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section), complete all as specified and as directed.

S&F mild steel work as in band, strap, supports or stay for rainwater, ventilating pipes incl bolts if reqd, hoocks and similar small articles conforming to Fe 290 Gde -E-165, complete all as specified and as directed.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A), complete all as specified and as directed.

Demolition of reed, lathing, single or double and plaster or chicken wire lathing on walls, complete all as specified and as directed.

M & L prepration of old painted steel surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints, complete all as specified and as directed.

M & L for Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying two coat of Ist grade synthetic enamel paint over a coate of red oxide primer zinc chrome, complete all as specified and as directed.

M & L for painting on new surfaces with two coats of synthetic enamelled paint on a coat of red oxide primer, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified, complete all as specified and as directed.

S & F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

S&F 1.25mm thick Mild steel sheet eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges, complete all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thick drop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thick stop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed.

M & L hardcore of gauge exc 63mm but n exc 100mm,deposited, spred and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface, complete all as specified and as directed.

M & L for 75 mm thick cement concrete (1:4:8) type D-1, (using 40 mm graded crushed stone aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer complete all as specified and directed, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical suface like, dado and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick screed bed in cement mortar (1:4), complete all as specified and as directed.

Non Skid ceramic colour tilles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed in cm (1:6) in flooring, complete all as specified and as directed.

M&L glazed ceramic coloured tiles 450 x 350 x 7 mm thick, in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 10mm thick back coat in cm (1:4) in dados/skirting, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing , complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification, complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed.

S&F 150mm long aluminium handle cost type anodised, complete all as specified and as directed.

S&F 150 mm size MS Pressed handle, oval type, stove enamelled black and fixed, complete all as specified and as directed.

S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel and fixed, complete all as specified and as directed.

S&F 125 mm size butt hinges, medium weight , cold rolled, mild steel and fixed, complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

S&F 300mm long MS sliding door bolts, bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed.

S&F140 mm long floor door stopper of aluminium alloy body and tounge, anosied with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F in repairs 20mm dia curtain rails, mild steel, chromium plated with incl fixing brackets, stops, rollers etc, complete all as specified and as directed.

S&F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and as directed.

S&F 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed.

M&L 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) for plinth protection, path/ steps etc to be finishing cement concrete surface even and smooth without using extra cement, complete all as specified and as directed.

S&F 110 mm bore PVC bends any radius, complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia, complete all as specified and as directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius, complete all as specified and as directed.

S&F 20mm bore of GI tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed.

S&F 15mm bore of GI tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed.

S&F bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore, complete all as specified and as directed.

S&F 15mm dia fancy type pillar tap, cast copper alloy, capstan heads, chromium plated,screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed.

S&F Angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F two way Angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms), complete all as specified and as directed.

S&F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms), complete all as specified and as directed.

S&F PVC valveless , syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets, complete all as specified and as directed.

M & L PCC (1:4:8), type D-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia, complete all as specified and as directed.

S&F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F 75 mmPVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F of 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single (Single T), complete all as specified and as directed.

M & L for providing precast cement concrete type B1 CM 1:2:4 (20mm graded aggregate)cover slab for manholes hoods, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed.

S&F for Vitreous china wash basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets and waste pipe, complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F toilet paper holder with flat recessed type stainless steel fixed to wall, complete all as specified and as directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets, complete all as specified and as directed.

S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and as directed.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long, complete all as specified and as directed.

M&L 4mm thick E board (Everest) non combustible moisture design building boards (600 x 600 x 4mm) , fixed or laid /inserted to GI snap grid framework with screw in ceilings, complete all as specified and as directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S, complete all as specified and as directed.

M&L three coats of white wash on ceiling on boards, complete all as specified and as directed.

M & L chequred cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick screed bed in CM 1:6, complete all as specified and as directed.

M & L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains, complete all as specified and as directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc, complete all as specified and as directed.

M & L Add or deduct for each 25 mm girth or part thereof over or under 30cm for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level, complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in flooring finished even and smooth using extra cement, complete all as specified and as directed.

M&L machine pressed chequered cement concrete tiles size 30cm x 30cm x 25mm thick and above, set,jointed and pointed in neat slurry with grey cement and pigments in floors cut and polished. over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:6), complete all as specified and as directed.

Taking down chowkhats or frame n.exc 1.50 and each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars, complete all as specified and as directed.

S&F mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde 250 quality A), complete all as specified and as directed.

M&L for 1.6mm thick MS Plates (plain or chequered) channels, in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts;square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F 3mm thick sheet glass, oridinary quality and glazing with oil putty in square n etc 0.5 sqm in each pane, complete all as specified and as directed.

S&F Pressed steel frames of size 165x60 mm for door with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate etc, complete all as specified and as directed.

S & F 30mm thick flush door shutters , solid core construction with black board core and plywood face panels,commercial type on both face complete all as specified hard & fitted to chowkats, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light /Fan point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC rectangular block with 3 mm thick plastic laminated sheet cover of suitable size (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc, complete all as specified and as directed.including testing on completion.

All as per item No116 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size, complete all as specified and as directed.

All as per item no.0116 above but One 3 pin socket outlet, 5 Amps, independent, with cables 2.5 sq. mm size, complete all as specified and as directed.

All as per item no.0116 above but One 3 pin socket outlet, 15 Amps, independent, with cables 4 sq. mm size, complete all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5/6amps, one way all as specified and as directed, complete all as specified and as directed.

S & F in replacement Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type, complete all as specified and as directed.

Supply and fixing lamp/angle holder insulated body with back plate for batten fitting, complete all as specified and as directed.

S&F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 9W, complete all as specified and as directed. Make : CAT Part No : LHLDDBEBBI8R009 of havells or Equivalent of Crompton/Philips.

Supply and fix sSwitch socket combination 2 in 1, 6A flush type, complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal, complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 18, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC, complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, complete all as specified and as directed.

Supply and fixing MCB SPN 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed.

M&L Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the concealed to wall/ceiling including one run of 4 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor, complete all as specified and as directed. (NOTE : Two runs of single core 4 sqmm and one run of 4 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.)

Supply and fixing MCB SP 6 To 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed.

Supply and fix MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1 , 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I, complete all as specified and as directed.

S&F 1100 volts grade heavy duty PVC insulated stranded aluminium conductor cable of cross-sectional area 10 Sqmm size (one twin core cable flat or circular, served with inner sheathing of PVC tape and overall PVC sheathed) in service connections, suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire and testing on completion, complete all as specified and as directed.

M & L for Supply and pour natural river sand for cushioning of underground cable in trenches 8 cm below the cable and 15 cm thick over the cable all as directed and specified including watering and consolidation, complete all as specified and as directed. Note: Punned thickness of sand to be consider for measurement purpose.

Supply and laying reinforced precast concrete cable cover class LV type 1 flaat size 250mmx 150mm x40mm laid in trenches for cable protection, complete all as specified and as directed.

Supply& laying cable XLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with multistranded aluminium conductor of size 25 sqmm 4.0 core ISI marked ( IS - 7098 Part-1)on wall with the help of shadel, complete all as specified and as directed.

S & F Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clamps with bolts nuts and washers including taking down unserviceable one, complete all as specified and as directed.

S&F gun metal, globe or gate valves of 25 mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including, complete all as specified and as directed.

S&F gun metal, globe or gate valves of 20 mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including, complete all as specified and as directed.

S&F Rotational moulded polythene water storage tank (cylindrical vertical with closed tops ) hoisted and fixed in position of 1000Ltrs capacity including tank cover and all necessary connection of tank nipple, complete all as specified and as directed.

S&F steel water tubing of the 25 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground, complete all as specified and as directed.

S&F steel water tubing of the 20 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground, complete all as specified and as directed.

S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 20mm bore pipe, complete all as specified and as directed.

M&L for cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50mm, complete all as specified and as directed.

M&L for construction of angle iron stage made out of MS equal angle of suitable size of thick complete including fabricated work, complete all as specified and as directed.

MS BRAHMA CONSTRUCTION (BID ID -3377494)

GYANENDRA THAPA (BID ID -3377493)

M/S JAYSHREE CONCERN (BID ID -3377455)

DEEP CHANDRA JOSHI (BID ID -3377436)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3377427)

RAMESH GURUNG (BID ID -3377372)

SANJAY MITTAL (BID ID -3377373)