Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC C O 68 BANK COLONY SUNDER NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Tender accepted due to lowest and reasonable quoted rates | |
| 2 | L2₹27.3 L+₹1.5 L (5.79%)Rejected-Finance BALSUA P O JHAKOLARI PATHANKOT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Being not a lowest | |
| 3 | L3₹27.6 L+₹1.8 L (6.93%)Rejected-Finance | L3 | Rejected-Finance Being not a lowest | |
| 4 | L4₹30.5 L+₹4.7 L (18.0%)Rejected-Finance | L4 | Rejected-Finance Being not a lowest | |
| 5 | L5₹31.7 L+₹5.9 L (22.7%)Rejected-Finance | L5 | Rejected-Finance Being not a lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) PATHANKOT
GE (WEST) PATHANKOT
REPAIR MAINT TO CERTAIN BLDGS OF JCOS OR CIVILIAN MD ACCN AT CERTAIN LOCATION INCLUDING PERIODICAL SERVICES AND ALLIED WORKS TO MD ACCN UNDER AGE BR-I OF GE (WEST) PATHANKOT
2023_MES_592835_1
GE/PKT-10/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (WEST) PATHANKOT
Please refer tender documents
9 documents required · 9 mandatory
₹500
GE (WEST) PATHANKOT
₹96,000
Yes
16 Jun 2023
2 May 2023
7 Jun 2023
2 May 2023
5 Jun 2023
22 May 2023
3 May 2023 - 12 May 2023
Amount
Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain etc complete all as specified and directed.
M & L for burnt clay brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
All as per serial item No. 2.00 but except bricks. Note: Old Serviceable burnt clay bricks retrieved from demolition shall be used.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed.
All as per srl item No. 5.00 above but on other than fair faces
M&L for 5 mm thick rendering on brick work or concrete surfaces in CM 1:3 as in ceiling of roof slab ,fin, facia, culvert, chajjas, parapet and similar article etc finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M & L for preparation of newly plastered surfaces of wall and applying two coats of cement Base Paint over and including one coat of alkali resistant priming paint complete all as specified and directed.
M & L for preparation of newly plastered surfaces of wall and applying minimum 02mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion over and including one coat of primer complete all as specified and directed.
Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L for cement concrete 1:4:8, type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M & L for 100mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M & L for 50mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection, apron, path, floor and paving finished even and fair complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M & L for joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
All as per srl item No 16.00 above but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and directed.
Supply and fixing joint free non skid coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Supply and fix joint free non skid Ceramic tiles, coloured 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat/redering in cement mortar 1:4 for fixing of tiles complete all as specified and as directed.
M & L for Glazed ceramic Coloured tiles in vertical/dado surface 450mmx300mmx7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and directed.
M&L for 18-20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
M&L for Non abrasive paving (rectified endura) coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15 mm thick screed bed in cement mortar 1:4 including dismantling old tile complete all as specified and directed.
M&L for 25mm thick Cement concrete in sub base for receiving floor tiles and mass concrete using Type B-1,1:2:4 (using 20 mm graded crushed stone aggregate) complete all as specified and directed. Note:- Finishing surfaces of concrete to be even and rough to receive the topping layer or floor tiles etc
Demolition of RCC of any description slab , shelves , chajjas, water tank ,chullah hoods etc and in any position including cutting reinforced as required complete all as specified and directed.
M & L for 35mm thick providing precast cement concrete louvers and jallies (measured solid) in 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate set in cement mortar 1:4 including dismantling of old RCC jalli complete all as specified and directed.
M & L for Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in boundary pillars, RCC jallies post, balusters with plain fair faces, including chamfers, weathering, throating etc. and setting in CM(1:4) with joints to match including dismantling of old RCC post complete all as specified and directed.
M & L for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs for drain, septic tank, soak well, culvert & manholes, shelves etc and similar articles with plain faces set in cement mortar (1:4) complete all as specified and directed.
M & L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished surfaces of concrete complete all as specified and directed.
M & L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.
Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings or PVC sheet in roof including ridges, sunshades or any position etc complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.
S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note :- Gap between wall and galvalume sheet as required at site to be filled in cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) & Cutting grooves 75 mm wide & 65 mm deep in stone/brick/concrete wall by mechanical cutter only shaping horizontal face of groove without any extra cost.
S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and as in ridge etc fixed with self-tapping screws complete all as specified and directed.
M&L for for 6 mm thick fibre cement corrugated or semi-corrugated sheet in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed. Note :- Gap between wall and fibre cement sheet as required at site to be filled in cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) & Cutting grooves 75 mm wide & 65 mm deep in stone/brick/concrete wall by mechanical cutter only shaping horizontal face of groove without any extra cost.
All as per serial item No. 35.00 above but except sheets. Note :- Serviceable quantity obtained from dismantling shall be reused under this item.
M&L for 6mm thick fiber cement two piece adjustable serrated ridge suitable for corrugated or semi corrugated sheets in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed
Dismantling timber scantlings 40sqcm and over in section, in any position as in wooden trusses in framed work of any description complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for including grills, door, truss, gate, rafters, purlins etc complete all as specified and directed.
S &F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; railings; framework of water tanks,coolar stand ,framed and hung as in steel gates including pintle hinges, stops,hand-made sliding bolts etc and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed.
S &F for rolled mild steel in hollow section as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; and supports to roof covering, sun-shades, vertical poles,cooler stand etc fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed.
M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for preparation of old plastered or unplastered ,old decorated surfaces of wall surface and applying one coat of distemper oil emulsion complete all as specified and directed.
M & L for complete removal of existing treatment on old plastered or unplastered or old decorated wall surface and applying minimum 1.5 mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion over one coat primer complete all as specified and directed.
M & L for complete removal of existing treatment on old plastered or unplastered or old decorated ceiling surface and applying two coats of white wash complete all as specified and directed.
M & L for complete removal of existing treatment on old plastered or unplastered or old decorated wall surface and applying two coats of white wash complete all as specified and directed.
M & L for preparation of old painted wooden surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
All as per srl item No 47.00 above but on steel surfaces
Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1 sqm above but not exc 2 sqm each and removing from site complete all as specified and directed.
S&F for factory made Pressed steel frame of size 125x60x1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete and back filling of hollow portion of frame including fixing of hold fast with plain cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate complete all as spd and directed
S&F for factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing and complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing and complete all as specified and directed.
All as per srl item No. 54.00 but wire gauzed ie.panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.The rate included for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm.
S&F factory made 35mm thick of 2nd class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain ,chamfered or rounded. fitted with cut and mitered beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, kiln seasoned, chemically pressure treated complete all as specified and directed.
S&F Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F Factory Made 30mm thick High density fibre panel board (HDF) door shutter as per details shown in drawings No. CEPZ/C-TD-037/13 sheet 1/2 & 2/2 respectively & conformed to IS: 15380-2003 complete all as specified and directed.
S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured 3mm thick glass and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed
M&L for preparation of newly wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F butt hinges medium weight 100 mm cold rolled mild steel including welding to steel frames as required at site complete all as specified ..
S & F 250mm long Aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed complete all as specified and directed.
All as per srl item No 62.00 above but fixed in repairs
S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding to steel frames as required at site and complete all as specified and directed.
S &F 200mm long aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
All as per srl item No 65.00 above but fixed in repairs
S & F 150mm long Extruded aluminum alloy handles, fabricated type, anodised complete all as specified .
All as per srl item No 67 above but fixed in repairs
S & F 140mm long Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S &F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
M & L for 18/19mm thick Pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood lipping fixed with screws to steel/timber frame work as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc including taking down old shutters & shelf etc complete all as specified
M&L for 18mm thick ultra voilet printed PVC board (weight not less than 12 Kg/Sqm) duly edge bonded with 0.8mm thick PVC taping as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc fixed with screws to steel/timber frame work etc including taking down old shutters & shelf etc complete all as specified.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.
S&F 100mm long Hasp & staple, safety type, aluminum anodised with hinge pin including bolt to hinge plate with screws complete all as specified.
S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
All as per srl item No 76.00 above but 20mm bore Steel water tubing
S & F for 15mm bore Steel water tubing 'medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
All as per srl item No 78.00 above but 20mm bore Steel water tubing
Re-fixing 15mm bore old steel water tubing with all new GI fittings etc in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed.
All as per srl item No 80.00 above but 20mm bore old steel tubing
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified
S&F for in repair Door cill powder coated aluminum brush type polypropylene screwed down to shutters complete all as specified .
S & F in repair for curtain rails 25 mm dia of pre painted aluminium with fixing brackets, stops, rollers, knob etc complete all as directed.
S&F in repairs heavy duty stainless steel bright finished ,fancy type decorative brackets fixed with PVC plug/gutty & screws etc complete all as specified .
Demolition and breaking up drain pipes (PVC,Salt glazed ware, AC or Reinforced concrete) set in cement mortar,internal dia of pipe in 75/110mm including earth work complete all as specified.
S&F for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors including earth work complete all as spd and directed.
S&F for PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors including earth work complete all as spd and directed.
Taking down eaves gutter and rain water pipe any size any pattern ,PVC/ AC pipe including all fittings ,Internal dia of pipe in 75/110mm complete all as specified and directed.
S&F for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F for PVC (SWR) bends ISI marked any radius 75mm dia complete all as spd and directed.
S&F for PVC (SWR) bends ISI marked any radius 110mm dia complete all as spd and directed.
Disconnecting existing tanks (PVC/RCC) of capacity exc 250 & not exc 500 liters, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position & Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.
S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with incl all GI fittings all as specified in SSR Part I including dismantling of old PVC/RCC water tanks complete all as specified.
All as per srl item No 95.00 above but water storage tanks of 1000 ltrs capacity
S & F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic bal screwed for iron pipe & fixed (min. weight 20mm-210 gms) complete all as specified and directed.
S & F in repair for sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.
S & F in repair for sinks made of stainless steel 01mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with screw of required size including necessary fittings/nuts, bolts & washers complete all as specified and directed.
S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete, including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified.
S & F in repair for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.
S&F in repair for for Vitreous China wash basin, white or in matching colour of tiles, flat back, size 630x450mm including brackets, CP brass waste fitting 32 mm dia,PVC waste pipe 750 mm long( Minimum) cutting for and pinning in ends of brackets or erecting stand complete all as specified.
S & F in repair for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified.
S & F in repair for 15mm dia PVC connections 600mm long with PTMT nuts complete all as specified.
S & F in repair for 125mm dia chromium plated perforated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified .
S & F in repair for PVC Bathroom cabinet Mirror of size 450mmX350mm wall Mounted, Shape Rectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
S & F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repair CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. Make : ACN-1121BN of JAQUAR or equivalent in any of the make mentioned in list of products.
S & F in repair 15mm bore dia fancy type, chromium plated angular valves /stop valves, cast copper alloy, screwed down, high pressure ,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed.
S&F in repair for 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or above butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (minimum weight 575 grams) complete all as specified and directed.
S&F in repair for 15mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type),cast copper alloy, screwed down, high pressure, with crutch or above butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed.
S & F in repair 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for basin, sink, bath complete all as specified and directed.
S&F in repair for Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S & F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make : ACN-1173 of JAQUAR or equivalent in any of the make mentioned in list of products.
S&F in repair for peg set of 05 Pin Stainless Steel Grade AISI 304, fancy type, superior quality and fixed with screws complete all as specified and directed.
S & F in repair for 75mm PVC floor trap, with perforated grating incl jointing to waste pipe fixed with solvent cement complete all as specified.
Repairs to any type of wooden joinery works such as door, window, Ventilator, wardrobes, cupboard, kitchen cabinet of any description by taking down & re-fixing in the same opening including Re-securing, easening / plaining, adjusting, re-fixing builders hardware, renewal of screws, welding (if required) etc making smooth functioning etc complete all as specified and directed.
S&F in repair for 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (minimum weight 665 grams) complete all as specified and directed.
S & F in repair for Bib tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms) complete all as specified and directed.
S & F in repair for gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed.
S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut,bolts, fixed with wooden/MS beads & screws etc complete all as specified and directed.
M & L for 04 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and directed.
M & L for 04mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and directed.
Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed
S & F for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) complete all as specified and directed.
M & L for preparation of old plastered or unplastered ,old decorated surfaces of wall surface and applying one coat of Cement Base Paint complete all as specified and directed.
M&L for Demolition & taking out sunken PCC, tiles including taking down old plaster from wall & floor surface and rendering 15mm thick plaster in cement sand mortar (1:4) mixed with water proofing compound (conform to IS-2645) as per manufacturer’s instructions and applied both on floor and wall in sunken portion and all pipe joints pipe shall be sealed properly and surfaces shall be cured and allowed to dry. Then apply a coat of Moisture Cured High Tensile Elastomeric Modified Poly Urethane Based Liquid Membrane on floor & wall as per manufacturer’s instructions, then Sunken floor filled with PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate to receive floor toping after carrying out the required tests of water proofing complete all as specified and directed.
M & L for 50 mm bore ‘medium grade’ galvanized pipe as in spout including neccesary cutting to wall/beam etc and proper setting in cement mortar 1:3 complete all as specified and directed.
S & F for second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sqcm and not exc 25 Sqcm including taking down old fillets complete all as specified
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required Internal dia of pipe 75mm/100mm complete all as specified and as directed.
S &F for 75mm bore spun Cast iron soil, waste and vent pipes , in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.
S &F for 100mm bore spun Cast iron soil, waste and vent pipes , in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.
S &F for 75mm bore spun Cast iron soil, waste and vent pipes , in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.
S &F for 100mm bore spun Cast iron soil, waste and vent pipes , in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.
S &F for 75mm bore Bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S &F for 100mm bore Bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
M & L for Cast iron floor trap75mm bore , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
M &L for two coat plaster 35 mm thick (20 mm + 15 mm) on fair faces or other than fair faces, rough surface of brick/stone/concrete masonry surface of wall, fin, facia, chajjas, parapet and similar article in cm 1:3 finished even and smooth without using extra cement complete all as specified and as directed.(Note:- WPC shall be measured and paid separately) Note :- Two coat plaster shall be carried out as mentioned in clause 14.18 of SSR-2009, Part-I complete all as specified and directed.
M & L for rendering 10mm thick in CM 1:4 on fair faces of brick work, stone, concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and as directed. Note: All rendered areas site to be cleaned and hand over as earlier without any extra cost to Govt.
All as per item no. 142.00 here-in-before but in paches not exc 3 sqm each patch
M & L for rendering 10mm thick in CM 1:4 on other than fair faces of brick work ,stone, concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and as directed. Note: All rendered areas site to be cleaned and hand over as earlier without any extra cost to Govt.
All as per item no. 144.00 here-in-before but in paches not exc 3 sqm each patch
M&L for 05 mm thick rendering in paches not exc 3 sqm each patch on brick work or concrete surfaces in CM 1:3 as in ceiling of roof slab ,fin, facia, culvert, chajjas, parapet and similar article etc finishing surfaces even and smooth without using extra cement complete all as specified and as directed. Note: All rendered areas site to be cleaned and hand over as earlier without any extra cost to Govt.
Supply only liquid water proofing compound all as specified and as directed.
M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. Note: All painted areas site to be cleaned and hand over as earlier without any extra cost to Govt.
M & L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint in any tint without any brush marks on the surface & matching with existing work over and including one coat of primer (as per manufacturer’s recommendations) including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes & leaving premise clean and tidy complete all as specified and as directed.
All as per ser item no 149.00 here-in-before but applying two coats of cement Base Paint in any tint over and including one coat of alkali resistant primer (as per manufacturer’s recommendations)
All as per ser item no 149.00 here-in-before but applying minimum 1.5mm thick white cement wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion in any tint over and including one coat of primer (as per manufacturer’s recommendations)
All as per ser item no 149.00 here-in-before but applying one coat of wall care putty 1.5 mm thick on the surface and sand papering the same when surface is dry,making the surface absolutely smooth and applying two coats of plastic emulsion paint(water thinable) confirming to IS 5411
M&L for preparation of old plastered or unplastered ,old/un decorated surfaces of wall surface by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of cement Base Paint in any tint without any brush marks on the surface & matching with existing work including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes & leaving premise clean and tidy complete all as specified and as directed.
All as per ser item no 153.00 here-in-before but applying one coat of distemper oil emulsion in any tint on wall surface
All as per ser item no 153.00 here-in-before but applying one coat of weather proof exterior emulsion Paint in any tint
All as per ser item no 153.00 here-in-before but applying two coats of white wash on wall
All as per ser item no 153.00 here-in-before but applying two coats of white wash on ceiling surface
All as per ser item no 153.00 here-in-before but applying one coat of plastic emulsion paint(water thinable) confirming to IS 5411
All as per ser item no 153.00 here-in-before but applying one coat of synthetic enamel paint on any type of brick, stone, concrete, asbestos cement, Heritage/textures finish or plaster/un plaster surface on floor/wall surface over 10cm girth or width, not otherwise described
M &L for complete removal of existing treatment of wall surface and applying two coats of cement Base Paint over and including one coat of alkali resistant primer (as per manufacturer’s recommendations) in any tint without brush marks on the surface & matching with existing work including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes & leaving premise clean and tidy complete all as specified and as directed.
All as per ser item no 160.00 here-in-before but applying minimum 1.5mm thick white cement putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion in any tint over and including one coat of primer (as per manufacturer’s recommendations)
All as per ser item no 160.00 here-in-before but applying two coats of weather proof exterior emulsion Paint in any tint over and including one coat of primer (as per manufacturer’s recommendations)
All as per ser item no 160 here-in-before but applying one coat of wall care putty 1.5 mm thick on the surface and sand papering the same when surface is dry,making the surface absolutely smooth and applying two coats of plastic emulsion paint(water thinable) confirming to IS 5411
Taking down old any type description of Heritage ,Texture finished surface including preparation of surface and M & L for applying heritage/Texture finish surface such as fine flakes features/heritage flakes textures features/heritage granite finish/ heritage granules finish/ heritage surface textures/metallic/stone finishes/natural finishes/super matt paint finish/fine flakes /fine granules etc complete application process as per manufacturer’s recommendations in any tint design & pattern as approved by GE including bonding agent & top coat including trowelled on the surface on internal or external surfaces including matching with existing work including necessary scaffolding any height height as required at site complete all as specified and as directed. Note: All painted areas site to be cleaned and hand over as earlier without any extra cost to Govt
M & L for applying two coat of synthetic enamel paint over and including one coat of primer (as per manufacturer’s recommendations) on any type of brick, stone, concrete, asbestos cement, Heritage/textures finish or plaster/un plaster surface on floor/wall surface over 10cm girth or width, not otherwise described, finished without brush mark & matching with existing work/ surface including preparation of old surface including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.
M & L for preparation of old painted wooden surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.
All as per ser item no 166.00 here-in-before but on steel surfaces
M & L for French polishing on surfaces of any description, width or girth including cleaning & preparing the surface including a coat of wood filler on old works with one or more coats in any colour finished without brush mark on surface including necessary scaffolding if required including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.
M & L for cutting down plants / trees of girth not exc 15 cm & surface area not exc 0.36 sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and pouring chemical to burn out roots etc and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) or cement mortar 1:2 complete all as per manufacturer instructions and as specified.
M & L for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimeter high but not exceeding 30 centimeter high etc with synthetic enamel paint including necessary scaffolding if required including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.
M & L for writing Stops, commas, short lines, dashes, hyphens, brackets, etc with synthetic enamel paint. including necessary scaffolding if required including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.
M & L obliterating the old writing of any description, not exceeding 0.1 square meter, match with the existing work including necessary scaffolding if required including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed.
M & L for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint in two coats without any brush marks & matching with existing surface, white or golden yellow or any colore/tint as approved by GE including preparation of previously treated/painted surfaces of road to receive the painting complete all as specified and directed. Note:-(a) The rates included for cleaning road surface. (b) 'The line painting shall stand out boldly and solidly without showing signs of brush marks or surface underneath.
Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 1,14,252.60). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249
GANDOTRA CONSTRUCTION CO
INDERJIT SINGH
Om Sai Ram Builders
M/S Raghuvanshi Builders
M/S CHAMAN LAL GUPTA
JP AND CO.
M/S KANWAR VIKAS SINGH
Amarjit Brothers
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .