CONSTRUCTION OF MARKET COMPLEX AT DAILY MARKET, CITY CENTRE, DURGAPUR - 16

Earth work in excavation of foundation trenches or drains, inall sorts of soil (including mixed soil but excluding lateriteor sand stone) including removing, spreading or stacking the spoils with in a lead of 75m. as directed. The item includes necessary trimming the sidesof trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturationwith water, ramming complete including the cost of supply of sand. (payment to bemade on measurement of finished quantity)

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement,ifany, in ground floor as per relevant IS codes. a) Pakur Variety

Ordinary Cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement ifany, in ground floor as per relevant IS codes. (i) Pakur Variety, Ground Floor,

Ordinary Cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement ifany, in ground floor as per relevant IS codes. (i) Pakur Variety, First Floor,

Ordinary Cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement ifany, in ground floor as per relevant IS codes. (i) Pakur Variety, Second Floor,

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor), (f) 25 mm to 30 mm shuttering without staging in foundation

Hire and labour charges for shuttering with centering and necessarystaging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor), (a) 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Ground Floor,

Hire and labour charges for shuttering with centering and necessarystaging upto 4 m using approved stout props and thick hardwood planksofapproved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor), (a) 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. First Floor,

Hire and labour charges for shuttering with centering and necessary staging up to 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor), (a) 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Second Floor,

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removalof looserust (ifnecessary), cutting to requisite length,hooking and bending tocorrect shape, placing inproper position andb inding with16 gauge black annealed wire at every intersection, complete as pe rdrawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m, II. Other than SAIL/ TATA/RINL, Ground Floor,

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removalof looserust (ifnecessary), cutting to requisite length,hooking and bending tocorrect shape, placing inproper position and binding with16 gauge black annealed wire at every inter section, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m, II. Other than SAIL/ TATA/RINL, First Floor,

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removalof looserust (ifnecessary), cutting to requisite length,hooking and bending to correct shape, placing inproper position and binding with16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m, II. Other than SAIL/ TATA/RINL, Second Floor,

Brick work with 1st class bricks in cement mortar (1:4), Ground Floor,

Brick work with 1st class bricks in cement mortar (1:4), First Floor,

Brick work with 1st class bricks in cement mortar (1:4), Second Floor,

125mm. Thick brick work with1st class bricks in cement mortar (1:4) , Ground Floor, floor.

125mm. Thick brick work with1st class bricks in cement mortar (1:4) in Firsat Floor.

Plaster (to wall, floor, ceiling etc.) withs and and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface], (ii) With 1:4 cement mortar, (c) 10 mm thick plaster

Plaster (to wall, floor, ceilingetc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface], (ii) With 1:4 cement mortar, (a) 20 mm thick plaster

Plaster (to wall, floor, ceilingetc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface], (ii) With 1:4 cement mortar, (b) 15 mm thick plaster

40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20mm nominal size)with water proofing compound of approved brand @0.2%weight of cement includingcost ofmaterialsover twocoatsof non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxicpaint to be paid seperately) forunder ground water retaining structures.

Neat cement punning about 1.5mm thick inwall, dado,window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Supplying, fitting and fixing Fan Hook for ceiling with1metre long16mm. dia rod complete includingmending damages. Payment for damage and repair to be made separately.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works, a) Span up to 12 Mtr

Supplying, fitting & fixing Zn-Alalloy (55%Al&45%Zn) coating of 150 grams per sq. metre ( followed by colour coated on both side) steel sheet work having minimum yield strength of 550Mpa of trapizoidal profile of approved make (excluding the supporting frame work ) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16mm dia & 3mmth.washer etc. complete with 150 mm endlap and one corrugation minimum side lap.( Payment tobemade on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete. A) UPVC Pipes: (ii) 110 mm. Dia.

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete. B) UPVC Fittings: a) Plain Tee, (ii) 110 mm. Dia.

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessaryclamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structure setc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete. B) UPVC Fittings: d) Shoe, (ii) 110 mm. Dia.

Protective and Decorative Acrylic exteriore mulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required.The rate includes cost ofmaterial, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsionpaint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat

Rendering theSurface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Acrylic Distemper to interior wall,ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Supplying and laying true to lineand level vitrified tilesof approved brand (size not less than 600mmX600mmX10 mmthick) in floor, skirting etc. set in20mm sand cement mortar (1:4) and 2mm thick cement slurry back side of tiles using cement @ 2.91Kg./sq Morusing polymerised adhesive (6mm thick layer applied directly over finished artificial stone floor / Mosaic etc without any backing course) laid after application slurry using1.75Kgof cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete in cluding the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive adgrout material to be supplied by the contrr]e) I (I) With application [email protected]/ Sq.m, 20 mm sand cement mortar (1:4) & 2mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour

Supplying, fitting andfixing Stainless Steel railing consist of 38mm dia and 900 mm height vertical balu stradeat every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE304 containing 7.5% nickle (Interior Grade) Brushed / Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. xiii) 12mm thick cleared toughened glass conforming to IS: 2553-1992 (Part-II)

Supplying heavy duty hydraulic double action floor spring along with top pin / set of pivots conforming to IS:6315 or any approved make as per direction of Engineer in charge.

Supplying fitting and fixing in position approved P.V.C.door frame (Matt finish) made of extruded P.V.C.multi chamber hollow section having dimensions 60 mm x 50 mm x 2mm (+/-0.2mm),horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges,one steel tube 40 mm x 20 mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will thenbe fixed in the opening with the help of P.V.C. ex pandable fastner / woodeng uttiesand galvanised steel screws including cost of all material sand labour,hire charges of tool sand appliances,carriageof all materials, taxes and all other incidental charges complete.

Supplying, Fitting & Fixing 30 mm thick thick both side pre laminated Double Leaf Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tube sof 19 gauge thick ness and size 19mmx19mm for styles, topand bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture,M.S. frame covered with 5mm th. heat moulded PVC“C ”channel of size 30mm th, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either sides forming styles; and 5mm th. 95mm wide PVC sheet out of which 75mm shall be flat and 20mm tapered in 45degree on the inner side to form top & bottom rail and115mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5mmx2) th., 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5mm th. both side PVC sheet tobe fitted in theM.S. frame welded / sealed to the styles & rails with7 mm (5mm+2mm)th.x15mmwide PVC sheet beading on inner side and joined together with solvent cement adhesive.Anadditional5mmth.PVCstripof20mmwhichistobestuckonthe interior side of the “C” channel usingPVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS : 1239 (Part-I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fittedwith holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.Payment forpaintingwill be made seperately) (a) For Exposed Work PVC Pipes, 40 mm Dia. Pipes.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS : 1239 (Part-I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fittedwith holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing material sand two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.Payment forpaintingwill be made seperately) (a) For Exposed Work PVC Pipes, 25 mm Dia. Pipes.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS : 1239 (Part-I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fittedwith holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing material sand two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes, 20 mm Dia. Pipes.

Supplying, fitting and fixing bib cock or stop cock. (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model- Tropical / Sumthing Special of ESSCO or similar

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing pillar cock of approved make. f) (ii) CP 2-way bib Cock- 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).

Supplying, fitting and fixing shower of approved brand and make. (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model-ALLIED of Jaquar or similar).

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (ii) Plastic (hallow type) white

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Supplying, fitting and fixing 10 litre P.V.C. low - down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long

Supplying,fitting and fixing approved brand 32mm dia.P.V.C.wastepipe, with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long

Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (Z) Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings. 40 mm Dia.

Supplying, fittingand fixingwhitevitreous chinabest quality approved make wash basin with C.I. brackets on 75mm X 75mm wooden blocks, C.P. waste fittings of 32 mm dia.,one approved quality brass C.P.pillar cock of 15mm dia., C.P. chain with rubber plug of 30mm dia.,approved quality P.V.C. waste pipe with C.P.nut 32 mm dia., 900mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damage sand painting the brackets with two coatsof approved paint. (i) 450 mm X 300 mm size

Add, G S T @ 18.00% for the Item no. - 1 to 62

Add, C E S S @ 1.00% 1.00% for the Item no. - 1 to 63