SPECIAL REPAIR TO SUN SHADES, GI/CI PIPE LINE WITH C-PVC AND OTHER REV WKS AT MIL STN TALBEHAT

Amount

Taking up cast iron /GI water mains (including all fitting) with Tees/Bend / Elbow for CI pipes spigot and socket ends and lead joints including burning out joints and recovering lead of size 80mm bore complete all as specified and directed by Engineer- in-Charge .

All as per above item No1 hereinbefore but 50mm bore complete all as specified and directed by Engineer- in-Charge.

All as per above item No 1 hereinbefore but 25mm bore complete all as specified and directed by Engineer- in-Charge.

All as per above item No 1 hereinbefore but 20mm bore complete all as specified and directed by Engineer- in-Charge.

Supplying and laying of C- PVC pipes SDR-11 of size outer diameter 50 mm & Plain CPVC SDR 11 fittings in trenches complete with all fittings such as tees, elbows, bends etc complete all as specified and directed by Engineer- in-Charge. Make: Ashirvad/supreme/Prince.

-Ditto - but CPVC pipe of bore 75 mm Inner diameter with CPVC Schedule 80 pipes & plain/ Threaded CPVC Schedule 80 fittings i.e. tees, elbow , bend, nipple & threaded coupler etc. and required jointing materials complete all as specified and directed by Engineer- in-Charge .

Supply & fixing 25 mm bore steel water tubing medium grade, galvanised with all fittings i.e. tees, elbow ,bends nipples and fixture fixed on wall /ceiling /in floor complete all as specified and directed by Engineer-in-charge Make : Jindal/swastic/Parkash Surya.

All as per above item No 11 herein before but of size 20 mm bore complete all as specified and directed by Engineer- in-Charge.

S&F in replacement of 80 mm bore sluice valve, cast iron body, both end flanged type in same position comprising with high tensile steel spindle, class PN-1.6,( ISI marked), conforming to IS-14846-2000, operating wheel, including nut bolt & washers for flanged joints and jointing material complete all as specified and as directed by Engineer in Charge. Make : Kartar/ IVC/ Upadhaya

Supply & fixing CPVC Ball Valves 50 mm including jointing materials i.e. threaded coupler , elbows , bends etc screwed both ends for CPVC pipe complete all as specified and directed by Engineer-in-Charge . Make : Leader/ venus/L&T/ Jindal/Ashirwad/prince

Supply & fixing Gun metal Ball Valves 20 mm cast copper alloy screwed down high pressure with handle screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge. Make : Leader/ venus/L&T/ Jindal

Excavation in trenches in soft/disintegrated rock/hard dense soil etc n. exc 1.5 m wide and not exc 1.5m in depth for foundation etc or for shafts, manholes, pier holes etc not exc 10 Sqmr on plan and not exc 1.5 mtr in depth and getting out complete all as specified and directed by Engineer- in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm each layers complete all as specified and directed by Engineer- in-Charge.

Removal of excavated material & surplus spoil not exc 50 m to a distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engineer- in-Charge.

M&L for construction of brick masonry valve pit chamber of following sizes (internal dimension) including necessary excavation and earth work in any type of soil and M.S Chequered plate cover 6 mm thick and angle iron 40 x 40 x 4 mm frame including locking arrangement with lock and key of (50mm brass and 6 lever) , complete all as specified, duly painting the steel surfaces in two coats of synthetic enamel paint over one coat of primer including plaster and PCC work complete all as specified and directed by Engineer- in-Charge.

Size 900 x 900 x 900 mm

M & L aluminium strip 25x3.15 mm with saddles and fixing screws etc for conductor from roof to ground level & connected to testing point complete all as specified and directed by Engineer- in-Charge.

M & L Galvanised iron strip 32x6 mm buried in ground level & connected to earth plate complete all as specified and directed by Engineer- in-Charge.

M & L single pointed Air termination aluminium rod 12mm dia, 300 mm long complete all as specified and directed by Engineer- in-Charge.

Supply and fixing porcelain vitreous white/brown/green spacers insulator of size 75mmx35mmx40mm height complete with one number galvanized iron stud bolts 66mm dia x 40mm long including nut & washers and two number galvanized iron fixing bolts of size 10mm dia and 50 mm long including washers and drilling holes for holding /fixing aluminium strip/roof conductor as required including testing on completion complete all as specified and as directed by the Engineer-in-Charge.

M&L for cement concrete in foundations, filling and mass concrete type C-2 (1:3:6) 40mm grade aggregate complete all as specified and directed by Engineer- in-Charge.

Supply and laying or fixing in replacement GI tubes light grade 32 mm dia, on place of rusted GI pipe in support of cables, on roof/pole/wall/laid in floor/in trenches complete all as specified and directed by Engineer- in-Charge. Make:- JINDAL, TATA, PRAKASH.

M&L for Earthing complete with galvanized earth plate electrode 600x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron strip (32x6 mm) by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 3 and testing on completion including adequate charcoal dust common salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-0 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe connected to earthing point complete all as specified and directed by Engineer- in-Charge.

M&L for Cutting holes not exc 150 Sqcm into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and making good, cutting not exc 10cm girth complete all as specified and as directed by Engineer-in-Charge.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

S&F Rolled mild steel in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, including all necessary drilling bolting or riveting etc. and similar work all as required and complete all as specified and as directed by Engineer-in-Charge conforming to Fe 290-W (Gde E-165).

S & F Mild Steel screw bolts of 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to and with washers and one hexagonal or square nut exceeding 10 cm and not exceeding 15 cm long complete all as specified and as directed by Engineer-in-Charge.

Preparation of new or previously untreated steel surfaces of any description over 10 cm width or grith, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide of zinc chrome complete all as specified and as directed by Engineer-in-Charge.

Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.

S & F Pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed by Engineer-in-Charge. Make :TATA BLUE SCOPE / JSW STEEL/META COLOUR.

M/S SHIVA TRADERS

M/S Kharya Associates

M/s Indu Enterprises