Certain repair to roof joinery plumbing sanitary and other misc items to Md and OTM Accn in sectors 37, 38, 42, 24, 30, 29, 28, RCMA 3 BRD and certain repair works in prefabricated rooms at first floor of TBRL Sector-30 Chandigarh

Amount

Material and labour for point wiring concealed type with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories & pressed steel terminal boxes suitable for moudular type fittings and brass screws with cup washers for fixing switches / socket / regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for the following, complete all as specified and as directed. (a) One fan/light point controlled by one way switch.

All as per serial item No 1.00 above but One 3 pin 5 Amps socket out let point on the independent board.

All as per serial item No 1.00 here-in-before but for one 15 Amp, socket outlet point controlled by one switch and wiring with 2.5 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 1.50 Sqmm unsheathed PVC insulated earth wire on Independent board.

Supply and fix for moduler switch one way 6/10 Amps,single pole,230 volts moduler type of apporved colour Make:- Crabtree (Schneider) cat part No-ACASXXW061 or equivalent out of the make mentioned in PS.

Supply and fix for modular type fan Regulator 5 step high speed (2Module) 100/120W, 230V complete all as specified and as per directed.

Supply and fix for moduler switch one way 16 Amps,single pole 230 volts moduler type of apporved colour complete all as specified and as per directed.

Supply and fix for socket outlet 6/10 amps 5 pin shuttered moduler type of apporved colour complete all as specified and as directed.Make:- Crabtree (Schneider) Cat part No:-ACMKPXW065 or equivalent out of the make mentioned in PS.

Supply and fix for socket outlet,6/16 Amps 3 pin combined shuttered moduler type of apporved colour complete all as specified and as directed. complete all as specified and as per directed.

Supply and fix for modular white cover plate with frame 1 moudule in Pearl white/approved shade for housing modular swithc/sockets Make : Crabtree (Schneider) or equivalent out of the make mentioned in PS.

Supply and fix for modular white cover plate with frame 2 moudule in Pearl white/approved shade for housing modular swithc/sockets Make : Crabtree (Schneider) or equivalent out of the make mentioned in PS.

Supply and fix for modular white cover plate with frame 3 moudule in Pearl white/approved shade for housing modular swithc/sockets Make : Crabtree (Schneider) or equivalent out of the make mentioned in PS.

Supply and fix for modular white cover plate with frame 6 moudule in Pearl white/approved shade for housing modular swithc/sockets Make : Crabtree (Schneider) or equivalent out of the make mentioned in PS.

Supply and fix for modular white cover plate with frame 8 moudule in Pearl white/approved shade for housing modular swithc/sockets Make : Crabtree (Schneider) or equivalent out of the make mentioned in PS.

Supply and fix for dummy plates Make : Crabtree (Schneider) or equivalent out of the make mentioned in PS.

Supply only GI box suitable for modular switch sockets complete for 1 and 2 module

Supply only GI box suitable for modular switch sockets complete for 3 module

Supply only GI box suitable for modular switch sockets complete for 6 module

Supply only GI box suitable for modular switch sockets complete for 8 module

Supply and fix in replace Ultra slim edge lite panel in aluminium casting, recess mounted 600x600 mm square fixture in white finish, suitable for low ceiling height LED light fitting 36 watt 230 volt energy efficient and connecting up and all as specified and as directed . Make : CROMPTON Cat part No: LCTRL-36-FO-CDL or equivalent out of the make mentioned in PS.

Supply, installation, testing and commissioning of Hi wall split type air conditioner indoor/outdoor unit of 1.5 ton capacity electric driven single phase 230 volt AC 50 c/s complete with cordless remote control unit with inbuilt air ioniser and plasma filter with 5 star rating, Non CFC suitable for operation on refrigrant R-410a and energy efficient

Supply and fix voltage stabliser for automatic operation single phase naturally air cooled type & designed for input variation between 170 V to 250 V with output voltage stablised at 230 V with accuracy of +/- 2.5% of capacity 5 KVA

Supply and fixing metal clad single pole and natural enclosure 240 volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amp suitable for Geyser/ AC point complete.

Material and labour for sub main wiring with two runs of single core, PVC insulated, unsheathed ,multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade and one run of 2.5 Sqmm PVC insulated earth continuity copper conductor cable drawn through and inculding suitable size of PVC concealed conduit with all necesary accessories such as bends, tees, junctions boxes, elbows etc complete with all in coming and out going cable connections complete all as specified and as directed. (Note : Two runs of 4 Sqmm cable, one run of 2.5 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Supply and fix sheet metal enclosure DB's double door for mounting MCB of 240 volt,12 way SPN with 200A rated busbar single pole and neutral and fixing in position including copper lugs for cable connection complete all as specified and directed .

Supply and fix for MCB SPN 40 Amp, AC, 415 volts,C series 10KA rating complete all as specified and as directed.

Supply and fix for MCB SP 16 to 32 Amp, AC, 230 volts 10 KA 'C' series rating complete all as specified and as directed.

Supply and fix for ceiling fan, 230 volts, single phase, 1200mm sweep, 5 Star rating with all accessories complete including taking down existing unserviceable ceiling fan of any description and size all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets, all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed

Demolition of brickwork built in cement mortor or cement lime mortor complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as directed.

Material and labour for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6)

All as per serial item No 32.00 above but except bricks

Material and labour for Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built CM(1:4)

Material and labour for reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Material and labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for formwork in footings lintels , beams , plinth beam vertical like etc.

Material and labour for vitirified double charged/ultra charge ceramic floor tiles 8 to 10mm thick (Square/Rectangular) polished area of each tiles exc 0.42 Sqm but not exc 1.00 sqm in floorsa etc set and jointed in neat cement slurry and pointed in coloured cement/pigment to match over 15mm thick cement screeding in cement motar (1:6) complete all as specified and directed

Material and labour for 15 mm thick rendering on fair faces of brick work of concrete surfaces with CM (1:6) even & smooth (with out using extra cement) complete all as specified and directed.

Material and labour for 10 mm thick rendering on fair faces of brick work of concrete surfaces with CM (1:4) even & smooth (with out using extra cement) complete all as specified and directed.

Material and labour for 3mm thick wall care putty on wall surfaces complete all as specified and directed

Material and labour for preparing newly plastered or previously untreated wall surfaces and applying two coats of plastic emulsion paint over one coat of primer complete all as specified and directed.

Material and labour for providing 6mm thick E Board (Classic) false ceiling of size 610X610fixed coloured/white with aluminium snap grid frame work of same size as aluminium Tee of size 25X25X1.50mm as main runner, 25X25X1.25mm thick aluminium tee as crss runner and aluminium angle of size 25X25X1.25m at the perimeter, including GI hangers of 6mm dia (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 X 3 size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including taking down/dismantling of existing old ceiling if any descrription, complete all as specified and directed. ( Note : The design and specification of the ceiling boards to be appproved by the user/AGE/GE prior to fixing in ceilling)

Material and labour for solid PVC wall panelling with 5mm thickness and size of each pannel 200mm wide with wood grain printed PVC Sheet complete including locking beading and PVC Sheet filet of wiudth 35mm for wall paneling inclusive of of fixing on to wall surface with suitable frame work of (1 mtrX 1mtr Grid) complete all as directed and specified

Supply and fix for 5.5 mm thick sheet glass best quality tinted and glazing with al beds complete all as specified and directed..

Material and labour for making hatching on sheet glass in any design/emblem of required as directed

Supply and fixing of aluminium grill of diamond shape of size 50 X 50mm and 5.5mm dia of bar including frame fitted with complete all as specified and directed.

Supply and fixing in repairs venition blinds, sheer demount blinds with aluminium roller tube, cassettee colour white fabric weight 140 gms, light control 70% fabric composition 100% polyester complete all as specified and as directed. (Make : Vistra or equivalent as approved by GE)

Removing and disposal of debries materials excedding 250 mtr but not exceeding 500 mtr and depositing outside the factory/Office complex area all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each encls all asessery complete all as specified and as directed.

Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and as directed.

All as per serial item No 54.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.

Refixing of chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each and refixing in same opeing complete all as specified and as directed.

All as per serial item 57.00 above But not exc 1.00 Sqm each

Supply and fix for factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

Supply and fix for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and as directed.

Supply and fix for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

Supply and fix for aluminium anodized handle of extruded section 75 mm long complete all as specified and as directed.

All as per serial item No 62.00 but 125mm long.

Supply and fix for aluminium anodized door stopper 140mm long overall length complete all as specified and as directed.

Supply and fix for MS butt hinges medium weight cold rolled 100mm size complete all as specified and as directed.

Supply and fix for continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick all as specified.

Aluminium alloy, anodised, sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Mild steel sliding door bolts, plate type 250mm long stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

Supply and fix for factyory made ERW section window Box type (`P' Section) with hinges, steel handl peg stay, complete with glazing bars, dovetailed or welded (to receive glazed or gauged).

All as per serial item No 69.00 but w/o glazing bars

Supply and fix for steel ventilators with top hung shutters incl Hinges steel peg stay complete

Material and labour for plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints using 2nd class hardwood (hollock) complete all as specified and as directed.

Supply and fix for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and as directed, thickness of M S Sheet 1.25mm.

Supply and fix for 125 x 60 mm pressed steel door frames with one or more rebates, including necessary fittings hinges with steel, thickness of M S Sheet 1.25mm.

Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members all as specified and as directed.

Supply and fix for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix for 40 mm thick flush shutters, solid care construction, with block board care and plywood face panels, commercial type on both sides all as specified.

Supply and fixing for 19mm thick prelaminated particle boards (both side laminated) of interior grade type II of approved shade fitted in cup board shutters complete all as specified and as directed.

Material and labour for french polishing on new wooden surfaces of any description, width or girth including cleaning & preparing the surfaces with a coat of wood filler on with 2 or more coats all as specified & as directed.

Supply and fix for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, all as specified.

Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and as directed.

All as per item No 82.00 above but steel surface over a coat of red oxide zinc chrome primer.

Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 13 sqcm and n.exc. 25 Sqcm clean sawn, secured with nails or brads all as specified.

Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair all as specified and as directed.

Supply and fixing for MS barrel tower bolt stove enameled black with bright bolt 150mm long complete all as specified and as directed.

Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and as directed.

Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

All as per item No 88.00 above but fixed in repairs.

Material and labour for 19mm thick block board grade-I quality exterior grade commercial type fixed with screw to timber frame work all as specified.

Material and labour for veneered decorative 6mm thick ply wood grade-I (with BWR resin) with one side decorative face fixed with screw all as specified.

Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fasteing and fixing complete fixed in repair all as specified and as directed.

Supply and fixing for fancy type curtain rods fixed in repairs.Supply and fixing for mild steel brackets for curtains rod fixed in repairs.Supply and fixing for mild steel brackets for curtains rod fixed in repairs.

Supply and fixing for 15 mm brass CP pillar tap with capstan head screwed down ,complete all as specified

Supply and fixing for tubes 15 mm bore, medium grade gavanized with all fittings and fixed in repair complete to wall and ceilings or laid in floors, complete all as specified

Supply and fixing for tubes 20 mm bore, medium grade gavanized with all fittings and fixed in repair complete to wall and ceilings or laid in floors, complete all as specified

Dismantling translucent sheeting for any description as in roof covering all as specified.

Supply and fixing for 2mm thick fibre glass reinforced translucent plain sheeting with two corrugation, side tap fixed with L-type or J-type hook bolts all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Supply and fix 0.5mm thick Hi-rib trapezoidal pre-painted galvalume sheet (1060mm) sheet of 550 mpa strength with 30mm crest height and 200mm pitch distance with guard film, side lap and end lap and fixing with nut bolt as per manufacturers instruction, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified.

Supply and fixing for 4.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with oil putty all as specified.

Supply and fixing for figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm.

Material and labour for anodised aluminium standard section of size 44.45X101.60X2.0mm thick for door/window frame including jointing aluminium cleats of suitable size and lugs, etc complete all as specified.

Material and labour for anodised aluminium door shutters single/double leaf, side hung type, with top rail of size 44.45X101.60X1.60mm thick, bottom & lock rail 44.45X101.60X1.60mm thick styles/meeting styles shall be of size 85X44.45X1.60mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 150mm long 2 nos to ach shutter complete all as specified.(Prelaminated board and glass to be measured & paid separately).

Supply and fixing for aluminium anodised window.ventilator shutters, side hung type without sash bars, aluminium secton of size 83.85mm x 44.45mmx1.6mm thick including necessary jointing cleats glazing clips, rubber packing aluminium anodised snap beading, screw, aluminium beadings such as peg stay 150mm long-01 No, Aluminium handle size 100mm -01 No hinges type B-21, 100mm long (2 Nos) on each shutter to be fitted with glass panes etc complete all as specified and as directed. (Note :- Glass panes to be measured & paid separately.

Supply and fixing for plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading complete all as specified.

Supply and fixing for 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc all as specified.

Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing laminated board, glass etc rubber/aluminium beading where defective and fitted in position complete all as specified. (laminated/particle board, rubber/aluminum beading measured separatly)

Supply and fixing for double action floor spring for aluminium door shutters fixed in repairs all as specified.

Supply and fixing for in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified.

Supply and fixing for in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters all as specified.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness

Material and labour for for Non - skid Ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15mm tk in cement motar 1:6. all as specifed and as directed

Material and labour for glazed ceramic tiles (coloured) 300X450X7-8mm thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over 15mm thick rendering CM 1:4 all as specified and as directed.

Dismantling of brick tiles or terracing tiles, single layer on roof & and stacking serviceable tiles for use and disposal of unserviceable material all as specifed

Demolition mud in roofs , any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)

Material and labour for 40mm thick brick tiles laid over and including cement mortar 1:4 on bricks or concrete surface of slab finished even and fair using WPC @ 2% by the weight of cement incl flush pointing over brick tile in cement mortar 1:3 complete all as specified and directed

Roughning the surface cleaning and washing down with water to remove dust etc

Cutting grooves in bricks work 75mm wide and 65mm deep and shaping horigontal face of groove with cement mortar 1:3 including filling the groove with cement mortar 1:3 after tuching the felt and finishing surface even and fair complete all as speficified and directed

Cutting out cracks to V section in existing roof surfaces or terraces, cleaning out, wetting grouting with cement and sand slurry 1 : 3 mixed with integrall water proofing comound all as specified

Material and labour for plain cement concrete Type B-0, 1:2:4 (using 20 mm graded granite stone aggregate) in roof kerbs, mud stops, rounded or chamfered on edges.

Providing plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate on roof surfaces as padding to receive waterproofing treatement and to the required slope including finishing the exposed surface even and fare all as specified and directed

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning of surfaces.

Material and labour for APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster nonwove fabric (wt n less than 150gm/Sqm) laid on primed surface by forced application complete all as specefied.

Supply only integral water proofing compound (WPC), ISI marked complete all as specified and as directed.

Clearance and removing bushes vegetation growth including taking out roofs of bushes/vegetation growth upto 30 cm depth and disposal of rubbish to a distance not exc 100 m complete all as specified and as directed

All as per item No 135.00 above except bricks.

Cleaning of bricks/cement mortar from bricks built in cement mortar stacking for measuring including all handling etc as directed by Engr-in-Charge.

Taking down of cement plaster of including racking joints, scrubbing down with water and hacking for key on walls.

Material and labour for two coats of cement base paint on walls incl preparation of new plastered surfaces.

Material and labour for prepration of new wall surface and apply two coats of Oil Bound Distemper all as specifed and as directed

Waste coupling of PTMT ,for WHB any colour half or full thread suitable for 32 mm size discharge pipe as in repair complete all as specified and as directed

PVC Waste pipe 900 mm long suitable 32 m dia waste coupling fixed as in repair complete all as specified

Taking up or down 15 MM steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20 MM steel tubing and connections, including cleaning for refixing or removal to store

Plug type bib taps15 MM, cast iron, screwed for iron pipe and fixed

PVC connections 15mm size with PTMT nuts of length 300mm

Supply and fixing for Stop valve concealed type fancy cromium plated with long shank and cup all as specified and directed by engr-in charge

Supply and fixing in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

Supply and fixing for Viterous china wash basin,white ,flat back size 550x400mm ,including fixing acessories like galvanised brackets and rag bolts complete fixed all as specigied and directed

Supply and fixing for viterous china squatting pan of pattern long pansize 580mm, with P or S trap front or back inlets and foot rst complete fixed all as specigied and directed

Supply and fixing for chromium plated shower roses with or without swivel joints any size including fixing to steel pipe

Supply and fixing for Pvc valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets

Supply and fixing for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

Material and labour for preparation of new plastered surfaces of walls by applying one coat of primer using necessary filling compound of white cement wall putty 2mm minimum, to obtain smooth regular/even finish, using sand paper etc and applying two coats of smooth exterior acrylic emulsion paint as approved by GE, complete all as specified and as directed.

Brass CP mixer for wall mixing non- Telephonic (Somany 221019 or eqvlt) hot & cold water screwed down for iron pipe and fixed

Brass CP mixer for wash basin (Centre Hole Basin Mixer Somany -220912 or eqvlt hot & cold water screwed down for iron pipe and fixed

Supply and fixing for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

Mild steel, plain black sheet 1.25mm thick in wall cladding, steel gates and cupboard and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

Machine cut kota stone slab flooring 20-25mm laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed 15mm thick in CM 1:4 all as specified and directed.

All as per item No 167.00 above but on treads of steps in single piece complete

Kota stone slab 15-20mm thick in risers of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment incl screed bed 15mm thick in CM 1:4 all as specified and directed.

Material and labour for Two coats of OBD on old plastered /unplastered surface walls, white or tinted incl preparation of old surface as directed as specified.

One coat of OBD wash on old surface of walls incl preparation of old surface as directed as specified.

One coat of OBD on ceiling on old surface of ceiling incl preparation of old surface as directed as specified.

Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (excluding fixing bolts, flushing cistern and flush pipe) all as directed and specified.

GOODWILL ENGINEERS

M/S MATLOOB AHMED