Certain repair to steel furniture in GE E FZR Cantt

Amount

ALMIRAH LARGE / MEDIUM STEEL GE.(FD-67(M), FD-350 & FD-1031 Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of almirah large steel including cutting, welding, turning, bending etc all as shown on drg complete all as specified and directed.

All as per Ser item No. 1.00 above but replacement of unsv Shelves made out of PBI sheet 1 mm thick.

All as per Ser item No. 1 above but replacement of unsv Mild steel chromium plated(CP) handle 120 mm of approved quality

All as per Ser item No. 1 above but replacement of unsv Mild steel lock 65 mm with screw, key plate and keys of approved quality

All as per Ser item No. 1 above but replacement of unsv Locking device complete as per drg.

All as per Ser item No. 1 above but welding to Almirah large steel

LOCKER STEEL (DRG NO FD-84) Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of Locker steel including cutting, welding, turning, bending etc all as shown on drg complete all as specified and directed.

All as per Ser item No. 7 above but replacement of unsv Bottom Sheet made out of PBI sheet 1 mm thick

All as per Ser item No. 7 above but replacement of unsvChromium plated(CP) handle 100 mm Make : Godrej/Super Gold.

All as per Ser item No. 7 above but replacement of unsv MS hasp and stapple 75 mm.

TABLE DINING OR STEEL AL TOP (DRG NO FD-84) Supply & fixing as in replacement of unserviceable Top made out of 19 mm thick block board commercial Ist quality covered with aluminium sheet 24 guage thick with steel screws unserviceable components/parts of table dining OR's steel including cutting, welding, turning, bending etc pest all as shown on drg complete all as specified and directed. (Note:- Blockboard shall be in one piece and joints etc in the length/width shall not be accepted in any case)

All as per Ser item No. 11 above but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 11 above but replacement of unsv PVC toe black in colour of good quality.

TABLE OFFICE OFFRS STEEL (DRG NO FD-1003) Supply & fixing as in replacement of unserviceableTable top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (sheesham) edging all around the table fixed with nails all as shown in drg of table office Officer's steel including cutting, welding, turning, bending etc all as shown on drg complete all as specified and directed. Note:- Joints in Block board shall not be accepted in any case)

All as per Ser item No. 14 above but replacement of unserviceable drawercomplete including necessary denting, repairing, welding bottom channel complete all as specified and directed.

All as per Ser item No. 14 above but welding toTable office officer steel

All as per Ser item No. 14 above but replacement of unsv Rubber Shoes black in colour of approved quality.

TABLE OFFICE CLKS STEEL (DRG NO FD-1104) Supply & fixing as in replacement of unserviceableTable top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (sheesham) edging all around the table fixed with nails all as shown in drg. complete all as specified and directed. Note:- Joints in particle board shall not be accepted in any case) of table office Clk's steel including cutting, welding, turning, bending etc all as shown on drg.

All as per Ser item No. 18 above but replacement of unserviceable drawercomplete including necessary denting, repairing, welding bottom channel complete all as specified and directed.

TABLE 3X3 STEEL (DRG NO FD-1009) Supply & fixing as in replacement of unserviceable Table top made out of 19 mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa teak faced bonded with phenol formal dehyde including hard wood (sheesham) beading 19x6mm all around the table fixed with nails all as shown in drg. of table 900x900mm steel including cutting, welding, turning, bending etc all as shown on drg complete all as specified and directed. Note :- Joints in particle board shall not be accepted in any case).

All as per Ser item No. 20 above but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

TABLE 3X2 STEEL WITHOUT DRAWER (DRG NO FD-1008) Supply & fixing as in replacement of unserviceable Table top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (sheesham) edging all around the table fixed with nails all as shown in drg. of table 900x600mm steel without drawer including cutting, welding, turning, bending etc all as shown on drg complete all as specified and directed. Note:- Joints in particle board shall not be accepted in any case).

All as per Ser item No. 22 above but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 22. above but replacement of unserviceable PVC toe black in colour of good quality.

TABLE 3X2 STEEL WITH DRAWER (DRG NO FD-1008) Supply & fixing as in replacement of unserviceable Table top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (sheesham) edging all around the table fixed with nails all as shown in drg of table 900x600mm steel with drawer including cutting, welding, turning, bending etc all as shown on drg complete all as specified and directed ( Note:- Joints in particle board shall not be accepted in any case).

All as per Ser item No. 25 here in before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 25 here in before but replacement of unserviceable PVC toe black in colour of good quality.

All as per Ser item No. 25 above but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as specified and directed.

CHAIR CBA STEEL (DRG NO FD-75) Supply & fixing as in replacement of unserviceable bottom seat of chair CB steel with arms made out of 1st class seasoned hard wood teak duly caned with 2 to 2.5 mm wide white cane plastic as Godrej Pattern. Make SHAH/Premier including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel with arm all as shown on drg, complete all as specified and directed.

All as per Ser item No. 29 above but replacement of unserviceable back.

All as per Ser item No. 29 above but replacement of unserviceable arm made from 1st class seasoned sheesham wood of chair steel with arms including two coats of synthetic enamel paint black over a coat of pink primer.

All as per Ser item No. 29 above but S & F flat iron 535x25x5 mm as in stiffener to support seat frame of chair CB steel with arms including cutting welding etc.

CHAIR CBB STEEL Supply & fixing as in replacement of unserviceable bottom seat of chair CB steel without arms made out of 1st class seasoned hard wood sheesham duly caned with 2 to 2.5 mm wide white cane plastic as Godrej Pattern. Make SHAH/Premier including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel without arm all as shown on drg, complete all as specified and directed.

All as per Ser item No. 33 above but replacement of unserviceable back.

All as per Ser item No. 33 above but S & F flat iron 420x25x5 mm as in stiffener to support seat frame of chair CB steel without arms including cutting welding etc.

TEAPOY VARANDAH STEEL (DRG NO FD-383) Supply & fixing as replacement of the following unsv component/parts of Teapoy verandah steel including cutting, welding, turning bending etc complete all as specified and shown in drg Teapoy top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (sheesham) edging all around the table fixed with nails all as shown in drg complete all as specified and directed.

Replacement of MS Flat iron 490x20x3mm to be welded with frame under bottom seat complete all as specified and directed

Replacement of unsv rubber shoes of approved quality to teapoy verandah complete all as specified and shown on drg

TEAPOY VARANDAH MAP (DRG NO FD/E6/MAP/17) Supply & fixing as replacement of the following unsv component/parts of Teapoy verandah steel including cutting, welding, turning bending etc complete all as specified and shown in drg Teapoy top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (sheesham) edging all around the table fixed with nails all as shown in drg complete all as specified and directed.

All as per Ser item No. 39 above but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top and bottom rail/side rail

Replacement of unsv rubber shoes of approved quality to teapoy verandah complete all as specified and shown on drg

Chair Computer (DRG NO FD/E6/MAP/01) Supply & fixing as in replacement of unserviceable acrylic fiber with foam cushion & PVC Beading of approved shade of seat & back of chair Computer as shown on drg, complete as specified and directed

Replacement of armrest made of black integral skin polyurethane reinforced of Chair Computer as shown on drg, complete all as specified and directed.

Replacement of Gas lift Mechanism with 100mm stroke length of Chair Computer as shown on drg complete all as specified and directed.

Replacement of pedestal of size 700mm with 05 Nos of nylon twin coaster wheels of chair computer as shown on drg, complete all as specified and directed.

Replacement of twin wheel nylon coaster wheels of chair computer as shown on drg, as specified and directed.

Chair Writing MAP (FD/E6/MAP/12) Supply & fixing as in replacement of unserviceable acrylic fiber with foam cushion & PVC Beading of approved shade of seat & back of chair Writing as shown on drg complete all as specified and directed.

Replacement of armrest made of black integral skin polyurethane reinforced of Chair Writing as shown on drg, as specified and directed.

Charpoy GI Pipe Hardtop (DRG No FD-229) Removing of old unsv plytop from charpoy GI pipe and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with 75 mm long x 6 mm dia full threaded nut and bolts with washer in bothside by drilling 2 Nos of hole in long rail and 2 Nos of hole on short rails. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified and directed.

S & F new iron strip of size 900x30x5 mm thick duly black painted in 2 Nos on long rails below ply wood top.

Removal of unsv long rail from existing frame of charpoy of GI pipe and supply and fixing of new long rail made out of GI pipe 32mm nominal bore medium grade ISI marked complete all as specified and shown on drg.

Removal of unsv short rail from exiting frame of charpoy of GI pipe and fixing of short rail made from unsv long rail retrieved from charpoy GI pipe after cutting threading of both ends to the requires size complete all as specified and shown on drawing.

Removal of unsv leg from existing frame of charpoy GI pipe and fixing by made from unsv long rail/Short rail retrieved from charpoy GI pipe including cutting threading complete all as specified and directed.

Repair of Charpoy GI frame including tightning, cutting, threading of both ends to the required size of long rail, short rail, leg complete all as specified and shown on drawing.

Removal of unsv elbow three way 32mm bore from existing frame of Charpoy GI pipe and supply and fixing new elbow GI three way 32mm bore medium grade ISI marked complete all as specified and shown on drawing.

Removal of unsv check nuts from existing frame of charpoy GI pipe supply and fixing new check nuts GI 32mm bore medium grade ISI marked complete all as specified and shown on drawing.

Welding of leg of charpoy GI pipe all as per drawing.

PAINTING TO STEEL FURNITURE Material & labour for preparation of old painted steel surface and apply in one coat of synthetic enamel paint of green /black or white graded inside/outside surfaced of steel furniture complete all as specified and directed.

ALMIRAH STTEL (DRG NO (FD-67(M) All as per Ser itemNo. 58 above but on Almirah steel medium with shelves complete external including top & bottom complete as specified and as directed.

All as per Ser item No 58 here-in-before but on almirah large with shelve complete internal and external including top and bottom (Drg No FD-1031)

All as per Ser itemNo. 58 here-in-before but on almirah large with shelves complete external including top and bottom. (Drg No FD-1032)

All as per Ser itemNo. 58 here-in-before but on Locker steel complete internal and external including top, bottom & shelves. (Drg No FD-222)

All as per Ser itemNo. 58 here-in-before but on Locker steel complete external including top & bottom and shelves. ( Drg No FD-223)

All as per Ser itemNo. 58 here-in-before but on Table office clerk steel. (Drg No FD-84(M) ).

All as per Ser itemNo. 58 above but on Table office officer steel. ( Drg No FD-84(M) )

All as per Ser itemNo. 58 above but on Table 900x900x760 steel. (Drg No FD-1009)

All as per Ser itemNo. 58 above but on Table 900x600x760 steel with drawer/without drawer. (Drg No FD-1007)

All as per Ser itemNo.58 above but on Teapoy verandah/ Teapoy Varandah MAP

All as per Ser itemNo. 58 above but on Chair CB steel with/without arms. (Drg No FD-75(M) )

All as per Ser itemNo. 58 above but on Rack/ Book Case steel.

All as per Ser itemNo. 58 above but on Trestle store room steel/iron. (Drg No FD-1043).

AS CONSTRUCTION

Sethi and Company

M/s Surjit Singh and bros

M/s Sham and Company