Improvements to Ramachandra Nagar Park at Ayyapanthangal Panchayat , Kundrathur Panchayat union under MLA CDS Scheme Funds of the Year 2024-25 in Kancheepuram District

Collection and supply of M Sand and filling in to the basement including cost conveyance to the siteand all labour charges for filling and including water consolidating etc.,

Plain Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges etc., complete.

Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc

Plain Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Swing 2 Seats:Swing Top pipe and supporting pipe made of Corrugated steel pipes ,seats made of FRP materials 18 inch X 12 inch size and Heavy Duty stainless steel chain,paint of all weather two coats using Epoxy paint including cost and conveyance of all materials,labour charges etc.

Seesaw 2 Board:Seesaw Top pipe and supporting pipe made of steel pipes ,See saw pipe length 7 ft ,seats made of FRP material with safety hand grip to play 4 children simultaneously,paint of all weather two coats using Epoxy paint including cost and conveyance of all materials,labour charges etc.

SLIDER made of GI sheet and ladders made of 1 inch pipe and 1/2 inch cross steps - Slide and Ladder centrally supported by 1-1/4 inch pipe ,paint of all weather two coats using Enamel paint including cost and conveyance of all materials,labour charges etc.

Bridge Ladder:Vertical and horizontal GI pipes of bridge ladder made of 1 inch and cross bars of ladder made of 1/4 inch. Height 5 1/2 ft,paint of all weather two coats using Epoxy paint including cost and conveyance of all materials,labour charges etc.

Brick work in Cement Mortar 1:5 (One cement and five sand) using Country Bricks ground moulded of size 23 x11 x7cm. For the following including curing etc., complete complying with standard specification.

Plastering with CEMENT MORTAR 1:5 (one cement and five sand)12 mm. thick in all floor including curing etc.Complete complying with standard specification.

Emulsion Colour washing Two coats with freshly burnt shell lime in all floors using best quality and approved variety of colour pigments including cost of all materials, brushes,and scaffolding charges etc.. Complete

Supply & Fixing of MS Grills of Size 1.80m x 0.60m including cost and conveyance of all materials to site and all labour charges etc complete

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

Leg Press: Supply ,Erection, and fixing of leg press of size 2030mm x 340mmx 1535mm,Area of 7.4 Sq ft, Material of pre galvanised Mild Steel of 3mm thick,Paint of all weather two coats of powder coated paint,Sealed ball bearing,Steel and Footrest/Food Paddle for long lasting life Etc,including cost and conveyance of all materials and labour charges etc.

Air walker/Leg & Thigh Exerciser : Supply ,Erection, and fixing of Airwalker of size 1122mm x 510mmx 1489mm,Area of 5.3 Sq ft, Material of pre galvanised Mild Steel of 3mm thick,Paint of all weather two coats of powder coated paint,Sealed ball bearing,Steel and Footrest/Food Paddle for long lasting life Etc,including cost and conveyance of all materials and labour charges etc.

Shoulder Builder: Shoulder builder equipped with 1. vertical post of dia inch, height 5 ft 2. Rotating/Spinning wheels (2 Nos) of dia 3 ft made of 1 inch pipe along with interior cross bars (2 nos) of 1 inch pipe with necessary provisions for handle to spin the wheel,Paint of all weather two coats using powder coated paint,including cost and conveyance of all materials and labour charges etc.

Hip Twister: Hip Twister equipped with 1. Vertical square channel post of size 70mmx70mmx6mm 2. Horizontal post (top and bottom) using square channel of size 50mmx50mmx6mm 3. Pedal (2 Nos) of dia 1 ft 6 inch made of checkered plate of 6mm thick with minimum ground clearance of 0.5 ft, and also necessary bearing to spin and necessary provision such as 1 inch handle to provide support,Paint of all weather two coats using powder coated paint,including cost and conveyance of all materials and labour charges etc.