SPL REPAIR TO BLDG NO P-4/FH, P-4/FC IN ZONE-III, ADDN/ ALTN FOR 02 X ROOMS AT HALDIGHATI LINE NEAR SB AR OFFRS MESS IN ZONE-III, ADDN/ ALTN OF P-455 AT HALDI GHATI LINE AND SPECIAL REPAIR FOR REWIRING IN BLDG NO P-541 (MT SHED) UNDER GE (S) JAIPUR

Amount

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM 11/SR/61SA/BLDG/2021-22/Q3W:450

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified. 11/SR/61SA/BLDG/2021-22/Q3W:175 12/REV/61SA/Q3W/2021-22: 100 23/MIN/61SA/Q3W/21-22: 60

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even. 11/SR/61SA/BLDG/2021-22/Q3W:150

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces including finished even & smooth without using extra cement on ceiling. 11/SR/61SA/BLDG/2021-22/Q3W:125 12/REV/61SA/Q3W/2021-22: 75 23/MIN/61SA/Q3W/21-22: 60

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of 1mm thick Birla wall care putty on walls all as specified & directed by Engineer-in-Charge 11/SR/61SA/BLDG/2021-22/Q3W:175

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces. 11/SR/61SA/BLDG/2021-22/Q3W:125

M&L for applying two coats of primer over the surface of walls of approved make all as specified and directed upto two or three stories bldg all as specified. Note :- The make of primer shall be of ASIAN or equivalent make 11/SR/61SA/BLDG/2021-22/Q3W:150

M&L for preparing of New plastered surfaces of including cornices pillasters and other wall features and applying two coats of weather based paint of approved shade over wall care putty including scaffolding arrangement, trestles, ladders etc and cleaning of furniture and floors , doors/ windows upto two or three stories all as specified and directed Make should be ASIAN and paint to be prepared by machines only and can be of different shades. Note :- 1.The paint shall be applied by rollers and other finishing tools to ensure smooth surface and consultaion with experts of ASIAN paints will also be taken whereever necessary. 2. Painting shall be done by experts or by Asian paints experts. 11/SR/61SA/BLDG/2021-22/Q3W:150

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for. 11/SR/61SA/BLDG/2021-22/Q3W:10

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing 11/SR/61SA/BLDG/2021-22/Q3W:100 12/REV/61SA/Q3W/2021-22: 150

S&F Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in cement mortar (1:4) 11/SR/61SA/BLDG/2021-22/Q3W:100 12/REV/61SA/Q3W/2021-22: 100 23/MIN/61SA/Q3W/21-22: 20

M&L for coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.16 sqm but not exceeding 0.38 sqm , in floors etc, set and jointed in neat cement slurry or tiles addeshive and pointed in white or coloured cement to match over 15mm thick Screed bed in Cement Mortar (1:4) Pattern and colour as directed by Engineer-in-charge. 11/SR/61SA/BLDG/2021-22/Q3W:30 12/REV/61SA/Q3W/2021-22: 50 23/MIN/61SA/Q3W/21-22: 12

S&F light shade Vetrified Ceramic tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) . 11/SR/61SA/BLDG/2021-22/Q3W:50

All as per item no 13.00 above but on Vertical surface such as Skirting/ dado etc including 15 mm thick Cement plaster in CM ( 1:4) on stone masonry surface or other than fair face of Brick masonry and finished fair and even 11/SR/61SA/BLDG/2021-22/Q3W:5

M&L CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn fixed in repair. 11/SR/61SA/BLDG/2021-22/Q3W:1

S&F in repairs PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. 11/SR/61SA/BLDG/2021-22/Q3W:10

M & L 15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in Repair 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 2

S&F in repair CP wall Mixer with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn 15mm bore for mixing hot & cold water and complete all as specified . 11/SR/61SA/BLDG/2021-22/Q3W:1 12/REV/61SA/Q3W/2021-22: 2

M&L Towel ring of brass CP Square flange and fixed in repairs 11/SR/61SA/BLDG/2021-22/Q3W:1 12/REV/61SA/Q3W/2021-22: 2

M&L Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colour (Make-CERA CAT PART NO CP 140 or equivalent of MARC, JAQUAR) and fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:1

M&L Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour (Make-CERA CAT PART NO CQ 608 or equivalent of MARC, JAQUAR) fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:6

M&L CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 604 or equivalent of MARC, JAQUAR) fixed in repair. 11/SR/61SA/BLDG/2021-22/Q3W:1

S&F in repairs Vitreous China wash hand basin flat back basin including half pedastal CERA Part No 1071 CYRCSS white / , coloured, , size 610x560mm including CP waste coupling but excluding taps, waste chain & plug & ( Make-Make-CERA, HINDWARE/ PARRY WARE or equivalent of), fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:2

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete Make-Cera, Parryware, Hindware or equivalent) fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:1 12/REV/61SA/Q3W/2021-22: 2

S&F in repairs vitreous china water closet Indian type 580 mm long pan white with 'P' or 'S' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion. 11/SR/61SA/BLDG/2021-22/Q3W:1

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity ( Make-HINDWARE CAT PART SLEEK PLUS or equivalent) fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 2 23/MIN/61SA/Q3W/21-22: 1

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed(Make-MARC CAT PART NO MAC 3020 or equivalentof CERA, JAQUAR) fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:4

S&F CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB (Make-Make-CERA CAT PART NO CM 104 B or equivalent of MARC, JAQUAR) fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 2

Taking down the existing unserviceable stop valve and S&F stop valve 15mm, copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. 11/SR/61SA/BLDG/2021-22/Q3W:4 12/REV/61SA/Q3W/2021-22: 2 23/MIN/61SA/Q3W/21-22: 2

S&F in repair Stop valves 20 mm bore, . copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 4 23/MIN/61SA/Q3W/21-22: 2

S&F in repairs of CP pressure JET for EWC including flexible pipe for 15 mm dia bore 11/SR/61SA/BLDG/2021-22/Q3W:1

Dismantling of old U/S grating and M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap.( Make Paryag and equilant ) 11/SR/61SA/BLDG/2021-22/Q3W:6

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore 11/SR/61SA/BLDG/2021-22/Q3W:15 12/REV/61SA/Q3W/2021-22: 30

20 mm bore 11/SR/61SA/BLDG/2021-22/Q3W:10 12/REV/61SA/Q3W/2021-22: 20

M&L Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed 11/SR/61SA/BLDG/2021-22/Q3W:12

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks & removing to store 11/SR/61SA/BLDG/2021-22/Q3W:2 23/MIN/61SA/Q3W/21-22: 1

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 4 23/MIN/61SA/Q3W/21-22: 1

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500/1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish 11/SR/61SA/BLDG/2021-22/Q3W:2

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 4 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frame) 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 5

All as per Ser Item No 40.00 above but pin headed figured glass 4mm thick 12/REV/61SA/Q3W/2021-22: 5

S&F Tooth brush holder/ Tumbler brass CP for putting bathroom utilities ((Make-CERA, Parryware, Hindware or equivalent) fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:1

S&F Soap dish brass CP ((Make-CERA CAT PART NO CA 103 or equivalent of MARC, JAQUAR) fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:1 12/REV/61SA/Q3W/2021-22: 2 23/MIN/61SA/Q3W/21-22: 1

S&F Cast Iron sand cast soil, waste and vent pipe 75mm bore in any length with or without ears with cement joints fixed to walls including taking down existing pipe. 11/SR/61SA/BLDG/2021-22/Q3W:10

S&F Cast Iron sand cast soil, waste and vent pipe 100mm bore in any length with or without eaars with cement joints fixed to walls including taking down existing pipe. 11/SR/61SA/BLDG/2021-22/Q3W:10

S&F Cast Iron bends any radius 75mm dia 11/SR/61SA/BLDG/2021-22/Q3W:4

S&F Cast Iron bends any radius 100 mm dia 11/SR/61SA/BLDG/2021-22/Q3W:4

S&F in repairs Cast Iron branch pieces single, (Single T) equal or unequal 75mm dia including taking down existing pipe. 11/SR/61SA/BLDG/2021-22/Q3W:2

S&F Cast Iron branch pieces single, (Single T) equal or unequal 100mm dia 11/SR/61SA/BLDG/2021-22/Q3W:2

S&F Cast Iron cowl 100mm dia 11/SR/61SA/BLDG/2021-22/Q3W:3

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement 11/SR/61SA/BLDG/2021-22/Q3W:3

S&F in Repairs of bathroom Glass corner of best quality complete all as specified and directed. 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 6

M&L for Fancy type MS bracket suitable for curtain rod fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:10 12/REV/61SA/Q3W/2021-22: 8 23/MIN/61SA/Q3W/21-22: 2

M&L of 20 mm dia Drapery Fancy type curtain rod fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:12 12/REV/61SA/Q3W/2021-22: 20 23/MIN/61SA/Q3W/21-22: 8

M&L for Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:10 12/REV/61SA/Q3W/2021-22: 8 23/MIN/61SA/Q3W/21-22: 2

M&L 28mm thick factory made PVC Supreme Door Shutter consisting of frame made out of m.S. tubes of 19 gauge thickness nd size of 40mmx20mm for stiles, top and bottom rails having a coat of steel primers of approved make and manufacture. M.S. Frame covered with 4mm thick heat moulded Prelam PVC 'C' Channel of size 28mm thickness,75mm width out of which 60mm shall be flat and 15mm shall be tapered in 45dgree angle on either sides forming stiles, top and bottom rail and 100mm widePrelam PVC sheet out of which 100mm shall be be flat and 15mm shall be tapered An additional of 5mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete on both sides to form lock rail.Lock rail shall be provided on either side of panel. Panelling of 4mm thick PVC sheet to be fitted in the MS Frame welded/sealed to the stiles with 8mm (4mm + 4mm) x 12mm wide PVC sheet as beading on inner side and 8mm (4mm + 4mm) x 20mm wide PVC sheet as beading on the inner tapered side of lock rails joined together with solvent cement adhesive. An additional of 4mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification and drawing. 11/SR/61SA/BLDG/2021-22/Q3W:5 23/MIN/61SA/Q3W/21-22: 1.8

M&L Factory made Adjustable (PVC) Doorframe of the size 65mm x 60mm with a wall thicknes of 4mm, made out of extruded 4mm PVC foam sheet, metre cut at two corners and joined with 2nos. of 150mm long brackets of 15 x 15mm M.S. Square tube. The two vertical door profile are to be reinforced with 40 x 20mm M.S. tube of 19 guage through out the frame. The doorframe shall be fixed to the wall using 65/100mm long M.S. Screw through the frame by using PVC fastners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge. 11/SR/61SA/BLDG/2021-22/Q3W:15 23/MIN/61SA/Q3W/21-22: 2.36

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position. 11/SR/61SA/BLDG/2021-22/Q3W:5

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick 11/SR/61SA/BLDG/2021-22/Q3W:6 23/MIN/61SA/Q3W/21-22: 6

M&L 35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated. 11/SR/61SA/BLDG/2021-22/Q3W:6 23/MIN/61SA/Q3W/21-22: 2.1

M&L 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats. 11/SR/61SA/BLDG/2021-22/Q3W:6

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete. 11/SR/61SA/BLDG/2021-22/Q3W:20 23/MIN/61SA/Q3W/21-22: 6

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. 11/SR/61SA/BLDG/2021-22/Q3W:10 12/REV/61SA/Q3W/2021-22: 12

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, . or extruded sections & fixing bolts & sliding bolts of extruded sections or . aluminium alloy. 11/SR/61SA/BLDG/2021-22/Q3W:10 12/REV/61SA/Q3W/2021-22: 12

S&F Aluminium handles 125 mm size, . type, anodised 11/SR/61SA/BLDG/2021-22/Q3W:10 12/REV/61SA/Q3W/2021-22: 12

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed. 11/SR/61SA/BLDG/2021-22/Q3W:2

S&F MS spring hinges 300 mm, ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden/ angle iron chowkats . 11/SR/61SA/BLDG/2021-22/Q3W:2

M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer 11/SR/61SA/BLDG/2021-22/Q3W:15 23/MIN/61SA/Q3W/21-22: 2.1

Dismantling structural steel work including doors, gates but excluding framed truss etc. 11/SR/61SA/BLDG/2021-22/Q3W:3

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete 11/SR/61SA/BLDG/2021-22/Q3W:300

S & F 1mm thick Mild steel , plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required 11/SR/61SA/BLDG/2021-22/Q3W:10

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 11/SR/61SA/BLDG/2021-22/Q3W:15

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick backing coat in CM 1:3 11/SR/61SA/BLDG/2021-22/Q3W:10

M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome 11/SR/61SA/BLDG/2021-22/Q3W:15 12/REV/61SA/Q3W/2021-22: 40 23/MIN/61SA/Q3W/21-22: 10

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level ) 11/SR/61SA/BLDG/2021-22/Q3W:10 12/REV/61SA/Q3W/2021-22: 1 23/MIN/61SA/Q3W/21-22: 2.5

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments over & including 20 mm thick screed bed in CM 1:6 over & including 75 mm thick PCC 1:3:6 type C2 all as directed by Engineer-in-Charge. 11/SR/61SA/BLDG/2021-22/Q3W:50

M&L Preparing old plastered surfaces including scrapping and applying two coat of white wash on ceiling 11/SR/61SA/BLDG/2021-22/Q3W:50

M&L for screed bed or bedding layer of cement mortar 1;4:10mm thick for laying floor finishes. 11/SR/61SA/BLDG/2021-22/Q3W:30

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) 11/SR/61SA/BLDG/2021-22/Q3W:8

All as per item No 79 above but area n exc 1.50 Sqm each. 11/SR/61SA/BLDG/2021-22/Q3W:8

Taking down shutters of any description exc 1.00 sqm but n exc 2.00 sqm each 11/SR/61SA/BLDG/2021-22/Q3W:12

Aluminium anodised frame fixed type with aluminium section weighing not less than 0.55 Kg/Mtr (suitable for specified window) including necessary joining, , cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete all as specified. 11/SR/61SA/BLDG/2021-22/Q3W:12 12/REV/61SA/Q3W/2021-22: 6 23/MIN/61SA/Q3W/21-22: 3

S&F Anodised aluminium window sliding shutter three track way type without sash bars' aluminium sections weighing 0.55 kg/m including necesssary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitttings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2 no) suitable handle (1 no) with complete accessories including glass, wiremesh, anodised aluminium guard bar, Andosided aluminium frame (chawkhats) and all accessories and fittings etc all as deirected by Engr-in-charge. 11/SR/61SA/BLDG/2021-22/Q3W:8

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with silicon gun in square n exc 0.5 sq.m in each pane 11/SR/61SA/BLDG/2021-22/Q3W:7 23/MIN/61SA/Q3W/21-22: 2

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works. 11/SR/61SA/BLDG/2021-22/Q3W:0.5

M & L RCC 1:5:3 Nominal Mix (using 20 mm graded stone aggreate) as beam , cantilever, bresummers, linten over 1.5 m span etc complete all as specified and directed 11/SR/61SA/BLDG/2021-22/Q3W:0.5

Form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels etc all as specified. 11/SR/61SA/BLDG/2021-22/Q3W:5

M & L mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed ) not less than 0.9 dia off confirming to grade Fe 310 all as specified. 11/SR/61SA/BLDG/2021-22/Q3W:50

Ditto all as per item No 88 above but 6 to 8 mm bar as in stirrups 11/SR/61SA/BLDG/2021-22/Q3W:25

M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6 11/SR/61SA/BLDG/2021-22/Q3W:1 12/REV/61SA/Q3W/2021-22: 3.5 23/MIN/61SA/Q3W/21-22: 8.5

Demolition of stone/brick masonary built in cement mortar or cement lime mortar 11/SR/61SA/BLDG/2021-22/Q3W:1

M&L 19 mm thick MDF Membrane Almirah/kitchen cabnaite door shutter in wood grain colour, half round edge fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:10

S & F Auto close hinges,stainless steel, bright finish or electrogalvanised fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:12

M&L of 19mm thick MDF board in cabinet almirah cub board and partiation and shelf of cabnait including fixed in repair 11/SR/61SA/BLDG/2021-22/Q3W:10

S&F brass handle of 100mm size . type, polished bright. 11/SR/61SA/BLDG/2021-22/Q3W:6

M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection 11/SR/61SA/BLDG/2021-22/Q3W:50

M&L of one coat of Birla wall care putty on walls etc 12/REV/61SA/Q3W/2021-22: 120

M&L for preparing of oil painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synethic enamel paint on wooden surfaces all as specified and directd by Engineer-in-Charge 12/REV/61SA/Q3W/2021-22: 40

M&L for preparation of old decorated plastered/ unplastered Surfaces of edges, facia & projection etc and applying two coat of Apex upto two storey building including scaffloding arrangement all as specified and directed by Engineer-in-charge. 12/REV/61SA/Q3W/2021-22: 200

M&L rendering 15 mm thick in CM(1:4) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified. 12/REV/61SA/Q3W/2021-22: 100

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of Birla wall care putty on walls all as specified & directed by Engineer-in-Charge 12/REV/61SA/Q3W/2021-22: 100

S&F in repair CP fancy Type center hole basin mixer 15mm bore cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn and fixed in repairs .and complete all as specified .( Make :- MARC,KINGSTON, HINDWARE) 12/REV/61SA/Q3W/2021-22: 2

S&F in repair CP cast copper alloy bib taps long body with wall flange fancy type of 15 mm bore quarter turn , complete all as specified .( Make :- MARC,KINGSTON, HINDWARE) 12/REV/61SA/Q3W/2021-22: 6

S&F in repairs in ball valve of PVC complete with aluminum rod with polyplast ball for 15mm dia iron pipe complete all as specified For low level flushing cistern 12/REV/61SA/Q3W/2021-22: 2

S&F in repairs PVC in connection 15mm dia 60cm long with 2 Nos brass checknuts with washer complete all as specified 12/REV/61SA/Q3W/2021-22: 6

S&F in Repairs of Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colour complete all as specified. ( Make :- MARC,KINGSTON, HINDWARE) 12/REV/61SA/Q3W/2021-22: 2 23/MIN/61SA/Q3W/21-22: 1

S&F in repairs 32mm dia PVC waste pipe flexible type for WHB 60cm long with union all as specified. 12/REV/61SA/Q3W/2021-22: 4

S&F in repairs waste fittings brass chromium plated 32mm dia for wash hand basin all as specified 12/REV/61SA/Q3W/2021-22: 4

S&F in repairs Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as directed 12/REV/61SA/Q3W/2021-22: 2

S&F in repairs plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified. 12/REV/61SA/Q3W/2021-22: 2

S&F in repairs Vitreous China wash hand basin flat back basin including half pedastal , coloured, , size 610x560mm including CP waste coupling but excluding taps, waste chain & plug . Complete all as specified and directed. 12/REV/61SA/Q3W/2021-22: 2 23/MIN/61SA/Q3W/21-22: 1

Dismantling of existing water tanks exc 500 but not exc 1000 ltrs capacity all as directed. 12/REV/61SA/Q3W/2021-22: 4

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 1000 ltrs capacity including disonnecting and refixing the GI pipe and fittings all as directed ( Make : SINTEX / ROTAX/ POLYCON ) 12/REV/61SA/Q3W/2021-22: 4

S&F in Repairs of Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour complete all as specified .( Make :- MARC,KINGSTON, HINDWARE) 12/REV/61SA/Q3W/2021-22: 6

S&F in Repair CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn complete all as specified .( Make :- MARC,KINGSTON, HINDWARE). 12/REV/61SA/Q3W/2021-22: 2

S&F in Repair CP Health faucet with chain e of 15 mm bore complete all as specified . 12/REV/61SA/Q3W/2021-22: 2

S&F in Repairs of Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples. 12/REV/61SA/Q3W/2021-22: 6 23/MIN/61SA/Q3W/21-22: 2

M&L of 19 mm thick Prelaminated particle board, interior grade, prelaminated both side with deocrative choice lamination , fixed with screws to timber frame work, in repairs 12/REV/61SA/Q3W/2021-22: 20

M&L for 6mm thick plywood, grade BWP, type BB fixed with nails to timber frame work of shutters and similar works in repairs. 12/REV/61SA/Q3W/2021-22: 5

M&L of 19 thick MDF Boards in cabinet almirah cub board/kitchen cabinet and partition of cabinet including lipping work fixed in repair 12/REV/61SA/Q3W/2021-22: 5

S&F of brass handle of 100 mm size type polished bright in repairs 12/REV/61SA/Q3W/2021-22: 10

M&L Auto close hinge 100 mm long of brass with CP finish for Kitchen Cabinet and Almirah shutter etc in repairs 12/REV/61SA/Q3W/2021-22: 10

S&F in repairs floor door stopper of Brass body single legged with rubber shoe fixed to bottom rail of door as directed 12/REV/61SA/Q3W/2021-22: 10

S&F in repairs elegent mirror PVC cabinet with towel rail of size 475 X 600X150 mm all as specified Make Jindal /Commander) 12/REV/61SA/Q3W/2021-22: 2

M&L for screed bed or bedding layer of cement mortar 1:4, 15 mm thick finished even and smooth without using extra cement all as directed by Engineer-in-Charge. 12/REV/61SA/Q3W/2021-22: 50

M&L Chequered cement concrete tiles 30cmx30cmx25mm thick, set,jointed and pointed in neat cement slurry in floors. 12/REV/61SA/Q3W/2021-22: 50

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over and including 25 mm thick sand cushoning all as directed by Engineer-in-Charge. 12/REV/61SA/Q3W/2021-22: 50

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge. 12/REV/61SA/Q3W/2021-22: 100

M&L of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail 12/REV/61SA/Q3W/2021-22: 4

Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar 12/REV/61SA/Q3W/2021-22: 10

M&L for Granite (of any type) work (table rubbed and polished) 16 to 18mm thick in risers & treads of steps, jambs, pillars, window cills,cooking platforms and similar works over & including 20mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) all as specified & directed by Engineer-in-charge. 12/REV/61SA/Q3W/2021-22: 10

M&L Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed 12/REV/61SA/Q3W/2021-22: 4

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. 12/REV/61SA/Q3W/2021-22: 4

M&L CP wall Mixer Telephonic Shower arrangment with connecting legs wall flanges and Telephonic shower crutch (Model Make-JAQUAR CAT PART NO CON 267KN or equivalent)) and telephonic hand shower single flow with self cleaning and flexible tube with hook 15mm bore for mixing hot & cold water screwed down for iron(Make-JAQUAR CAT PART NO ALD 577or equivalent) 12/REV/61SA/Q3W/2021-22: 2

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles. 12/REV/61SA/Q3W/2021-22: 4.5 23/MIN/61SA/Q3W/21-22: 8.5

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 except bricks 12/REV/61SA/Q3W/2021-22: 1

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 110mm bore. including taking down old branch pieces. complete all as specified and directed. 12/REV/61SA/Q3W/2021-22: 20

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 75mm bore. including taking down old branch pieces. complete all as specified and directed. 12/REV/61SA/Q3W/2021-22: 20

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore.including taking down old branch pieces. complete all as specified and directed. 12/REV/61SA/Q3W/2021-22: 20 23/MIN/61SA/Q3W/21-22: 5

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore.including taking down old branch pieces. complete all as specified and directed. 12/REV/61SA/Q3W/2021-22: 20

S&F UPVC (SWR) bend of any radius of 110mm bore. 12/REV/61SA/Q3W/2021-22: 5

S&F UPVC (SWR) bend of any radius of 75mm bore. 12/REV/61SA/Q3W/2021-22: 5 23/MIN/61SA/Q3W/21-22: 2

M&L for welding of existing damaged/ broken hinges and any other member of steel windows, angle iron chowkets, steel gates,steel ventietor to achieve smooth functioninf. 12/REV/61SA/Q3W/2021-22: 10

M&L Aluminium Powder coated (minimum thickness of powder coating 60 micron) frame for holding of two track sliding shutter fixed type with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etcand beading for fixing of galvanised wire wire mess complete all as specified 12/REV/61SA/Q3W/2021-22: 10

M&L Aluminium powder coated (minimum thickness of powder coating 60 micron) door/window shutter openable/ sliding type with aluminium section weighing 0.35 Kg/ Mtr incl. necessary joining, cleats, glazing clips, rubber packing aluminium powder coated snap beading, screws, handle & tower bolt etc complete all as specified 12/REV/61SA/Q3W/2021-22: 10

M&L in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws(Make-CERA MARC, JAQUAR) fixed in repair 12/REV/61SA/Q3W/2021-22: 2

S&F for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

(a) 15 mm bore 23/MIN/61SA/Q3W/21-22: 15

(b) 20 mm bore 23/MIN/61SA/Q3W/21-22: 10

(c) 25 mm bore 23/MIN/61SA/Q3W/21-22: 5

M&L Mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolt & nut four on bolt plate & 2 on staple plate & fixed length of bolt 300 mm 23/MIN/61SA/Q3W/21-22: 4

M&L Mild steel pressed handle oval type stove enameled black 125mm size. 23/MIN/61SA/Q3W/21-22: 4

M&L MS tower bolt, stove enameled black with bright bolt, length of bolt 150mm. 23/MIN/61SA/Q3W/21-22: 4

S&F Factory made steel ventilators with top hung shutters incl hinge steel peg stay complete incl. taking down old ventilator 23/MIN/61SA/Q3W/21-22: 0.36

M&L Plain cement concrete1:3:6 mix in foundation by using 40 mm gde stone agg as in, filling and mass concrete 23/MIN/61SA/Q3W/21-22: 2.1

S&F Mild steel bolts purpose made with hexagonal or square head one end and screw the other or screw both ends each screws end to end to be fitted with washer and one hexagonal or square not exc 30cm long all as specified. 23/MIN/61SA/Q3W/21-22: 15

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or including induction butt welded tubes conforming 1161-1979 grade st 240 all as specified 23/MIN/61SA/Q3W/21-22: 100

S&F Pre Painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of an colour having tensil strength of 550Mpa as in roof covering with screws as specified. 23/MIN/61SA/Q3W/21-22: 40

S&F Aluminium snap grid frame work of grid size 605 x 605mm for false ceilling all as specified. 23/MIN/61SA/Q3W/21-22: 40

M&L for Exposed metal frame ceilling with calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceilling shall be measured and paid seprately all as specified. 23/MIN/61SA/Q3W/21-22: 36

M&L 75 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection. 23/MIN/61SA/Q3W/21-22: 36

M&L For coloured Non skid ceramic tiles 7 to 8 mm thick square/rectangular) area of Each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over 15 mm thick screed bed in CM(1:4) completed all as specified 23/MIN/61SA/Q3W/21-22: 36

M&L For hardcore gauge 40 to 80mm,deposited, spread ,and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified. 23/MIN/61SA/Q3W/21-22: 12

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors 23/MIN/61SA/Q3W/21-22: 10

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors 23/MIN/61SA/Q3W/21-22: 10

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls 23/MIN/61SA/Q3W/21-22: 5

S&F PVC (SWR) bends any radius 110mm dia 23/MIN/61SA/Q3W/21-22: 2

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia 23/MIN/61SA/Q3W/21-22: 2

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia 23/MIN/61SA/Q3W/21-22: 2

S&F PVC (SWR) vent cowl 110mm dia 23/MIN/61SA/Q3W/21-22: 2

S/F in repair brass CP Angle stop cock fancy type concealled type long body,15 mm bore 23/MIN/61SA/Q3W/21-22: 2

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm 23/MIN/61SA/Q3W/21-22: 1

S&F in repair 15mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete. 23/MIN/61SA/Q3W/21-22: 2

S&F PVC connections 15mm size with PTMT nuts of length 300mm 23/MIN/61SA/Q3W/21-22: 2

S&F in repairs vitreous china water closet pan (pedestal pattern ), white (excluding fixing bolts, flushing cistern and flush pipe . All as specified 23/MIN/61SA/Q3W/21-22: 1

S&F in repair PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap. 23/MIN/61SA/Q3W/21-22: 2

Preparing new plastered surfaces including scrapping and applying two coat of Dry distemper all as specified and directed by Eng-in-Charge 23/MIN/61SA/Q3W/21-22: 36

S&F Factory made steel window with side hung shutters incl projecting type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded incl. taking down old window 23/MIN/61SA/Q3W/21-22: 3

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, & steel peg stay, complete without glazing bars, dovetailed or welded incl. taking down old window 23/MIN/61SA/Q3W/21-22: 2

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane 23/MIN/61SA/Q3W/21-22: 2

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate. 23/MIN/61SA/Q3W/21-22: 36

S&F powder coated aluminimum anodised door/window shutter openale / sliding type with aluminimum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws handle tower bolt etc complete all as specified and directed. 23/MIN/61SA/Q3W/21-22: 4.5

S&F 4.00 mm thick frosted glass of ordinary quality and glazing in square as required as directed by Engr -in-Charge. 23/MIN/61SA/Q3W/21-22: 2.1

S&F 5.5 mm thick glass of ordinary quality and glazing in square including solar control film 25mm micron reflective type sticked to glass panes as per instructions of manufacturers . 23/MIN/61SA/Q3W/21-22: 2

S&F galvanised mild steel wire cloth 0.36 mm nominal dia of wire with average width of aperture 1.40 mm fixed with tinned tacks or galvanised wire stapels fixed etc complete all as specified and directed. 23/MIN/61SA/Q3W/21-22: 5

S&F aluminimum framed work such as grills , gratings etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars and similar works complete all as specified 23/MIN/61SA/Q3W/21-22: 5

EM Portion Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete including all fittings such as switches, ceiling roses, pendants, sockets, lamp holder, fan regulator brackets light fittings tube light fitting, bell/ buzzer etc (excluding fans) and making good disturbed surfaces of wall floors, ceiling etc complete all as specified and as directed by Engr-in-Charge to match with existing surface. 11/SR/61SA/BLDG/2021-22/Q3W:70 12/REV/61SA/Q3W/2021-22: 36 10/SR/61SA/BLDG/2021-22/Q3W:380

M&L Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLS insulated, PVC insulated and unsheathed stranded cable 1100 volts grade, confirming to IS-694/ISI marked in and including PVC casing caping, medium grade, ISI marked, with mild steel sunken boxes with earth dolly zink coated and including mounting frame and over cover plate, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings.

One light/fan/ bell point controlled by one, one way switch. 11/SR/61SA/BLDG/2021-22/Q3W:34 12/REV/61SA/Q3W/2021-22: 22 10/SR/61SA/BLDG/2021-22/Q3W:290

One 3 pin 5 Amp socket outlet on the same board with other switches. 11/SR/61SA/BLDG/2021-22/Q3W:8 12/REV/61SA/Q3W/2021-22: 4 10/SR/61SA/BLDG/2021-22/Q3W:40

One 3 pin 5 Amp socket outlet on independent board with other switches. 11/SR/61SA/BLDG/2021-22/Q3W:19 12/REV/61SA/Q3W/2021-22: 4 10/SR/61SA/BLDG/2021-22/Q3W:40

All as per Item No 187 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, complete all as specified & directed by Engr-in Charge. 11/SR/61SA/BLDG/2021-22/Q3W:9 12/REV/61SA/Q3W/2021-22: 4 10/SR/61SA/BLDG/2021-22/Q3W:10

All as per Item No 188 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, complete all as specified & directed by Engr-in Charge. 12/REV/61SA/Q3W/2021-22: 2

S&F switch, piano type 230/250 volts for the following:-

(a) Single pole, one way 5 Amp rating 11/SR/61SA/BLDG/2021-22/Q3W:61 12/REV/61SA/Q3W/2021-22: 30 10/SR/61SA/BLDG/2021-22/Q3W:370

(b) Single pole, one way 15 Amp rating 11/SR/61SA/BLDG/2021-22/Q3W:9 12/REV/61SA/Q3W/2021-22: 4 10/SR/61SA/BLDG/2021-22/Q3W:10

S&F Socket outlet 3 pin 5 Amp 2 in 1 flush type, 230/250 Volts grade on top covers (catered in point wiring above) :- 11/SR/61SA/BLDG/2021-22/Q3W:27

S&F Socket outlet 3 pin 15 Amp flush type, 230/250 Volts grade on top covers (catered in point wiring above) :- 11/SR/61SA/BLDG/2021-22/Q3W:9

S&F Socket outlet multipurpose use, on top covers (catered in point wiring above) :-

5 Pin 6 Amp 12/REV/61SA/Q3W/2021-22: 8 10/SR/61SA/BLDG/2021-22/Q3W:80

6 Pin 16 Amp 12/REV/61SA/Q3W/2021-22: 4 10/SR/61SA/BLDG/2021-22/Q3W:10

S&F Electric bell Ding dong type AC 230 volts single pole Make Anchor 12/REV/61SA/Q3W/2021-22: 2

S&F Lamp holder insulated body with back plate for batten fitting. Make Anchor/bajaj/philips 11/SR/61SA/BLDG/2021-22/Q3W:12 12/REV/61SA/Q3W/2021-22: 2

M&L Ceiling rose surface bakelite 65x50mm, three terminals. Make Anchor/Legrand/Crabtree 11/SR/61SA/BLDG/2021-22/Q3W:22 12/REV/61SA/Q3W/2021-22: 14 10/SR/61SA/BLDG/2021-22/Q3W:270

S&F speed regulator modular type for ceiling fan electronic type 230 Volts complete. 11/SR/61SA/BLDG/2021-22/Q3W:5 12/REV/61SA/Q3W/2021-22: 2 10/SR/61SA/BLDG/2021-22/Q3W:15

S&F in repair T5 integrted batten LED Light fittings 1 x 20 W ,240 volt( size-4 feet/1136 mm) long life, surface/wall mounting IP 20, luminaire per watt (Minium) extruded alluminium housing with frosted PMMA diffuser with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton Cat No LTTB4F20WLED/Wor equivelent model in Bajaj/Wipro/ Philips/CG /Surya roshni 11/SR/61SA/BLDG/2021-22/Q3W:16 12/REV/61SA/Q3W/2021-22: 9

S&F in repair surface mounted LED Mirror light fitting 6 W LED Warmwhite waterproof curve, antique design with fine finishing provide with high power LED, energy saving ,lower power consumption, no RF interference, environmental friendly and recyclable, easy for installation water proof LED Driver suitable for bathroom, bedroom pre-wired twin core twisted flexible copper conductor cable with suitable size as per sample and as directed by engineer in charge 11/SR/61SA/BLDG/2021-22/Q3W:2 12/REV/61SA/Q3W/2021-22: 2

S&F in repair security lights LED 45 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniformlight spread cames LED technology of Britelite. including bracket made out of suitable size of GI medium grade tubing and fixed with clamps nuts and bolts, washer complete all as specified . Make- CG cat Pt No-LSTS-45-CDL or equivalant in HAVELLS ,Syska and Phillips 11/SR/61SA/BLDG/2021-22/Q3W:5

S&F in repair wall Bracket light asthetically designed with B22d & E27 lamp holder including 10W LED Lamp with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Halonix cat Pt No- HLBW-01-B22 or equivelent model in Bajaj/ Philips/Syska 12/REV/61SA/Q3W/2021-22: 2

S&F in repair 10 W LED IP -65 Bulkhead environmental friendly, ultra modern, energy saving, surface mounted decorative Hexagon bulk head back lit LED luminaire comprising of high brightness LEDs wall mounted complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size Make - Crompton LBHP-10-CDL or equivelent model in Wipro/ Philips/C G 12/REV/61SA/Q3W/2021-22: 2 10/SR/61SA/BLDG/2021-22/Q3W:30

M & L in repair Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit/casing capping and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. 11/SR/61SA/BLDG/2021-22/Q3W:15 12/REV/61SA/Q3W/2021-22: 35 10/SR/61SA/BLDG/2021-22/Q3W:100

S & F in repair sheet metal enclosure MCB DB 12 way SPN double door suitable for 240 V with 200 amps rated copper bus bar fixed/ flused on walls including cutting Knitch and making good disturbed surfaces including taking down and packing the old surface. 11/SR/61SA/BLDG/2021-22/Q3W:2

S&F in repair factory made, sheet distribution boards, SP&N 8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating :- 12/REV/61SA/Q3W/2021-22: 2

S&F in repair MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

(a) SP 5 to 32 amps 12/REV/61SA/Q3W/2021-22: 12 10/SR/61SA/BLDG/2021-22/Q3W:150

(b) SPN 32 to 63 amps. 12/REV/61SA/Q3W/2021-22: 2 10/SR/61SA/BLDG/2021-22/Q3W:15

S & F in repair MCB single pole (SP) 240 volt 06-32 amp for inductive load connected through cable lugs of switable size complete all as directed. 11/SR/61SA/BLDG/2021-22/Q3W:20

S & F in repair MCB single pole neutral (SPN) 40-63 Amps for inductive loadconnected through cable lugs of suitable size complete all as directed. 11/SR/61SA/BLDG/2021-22/Q3W:2

M&L for earthing with steel earth plate electrode of size 60cmX60cmX60mm thick buired directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron wire of size 4 mm dia as earthing lead by means of nuts, bolts and washers of stel, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover size 30X30cm made of RCC 1:3:6 with suitable hbdle, angle iron frame made of angle iron of size 40X40X4mm, adequate qty of charcoal dust and salt layers all around the earh plate, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75X75X6mm fixed to wall all as specified in plate No 3 of SSR Part -I and directed by Engr-In-Charge. 11/SR/61SA/BLDG/2021-22/Q3W:2

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 10 sqmm, 2 core including taking out exsisting cable . 11/SR/61SA/BLDG/2021-22/Q3W:100

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in any type of soil. 11/SR/61SA/BLDG/2021-22/Q3W:21.6

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil. 11/SR/61SA/BLDG/2021-22/Q3W:14.6

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point 11/SR/61SA/BLDG/2021-22/Q3W:7

M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover. 11/SR/61SA/BLDG/2021-22/Q3W:6

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as directed by Engineer in-charge 11/SR/61SA/BLDG/2021-22/Q3W:0.695652173913043

M & L for exhaust fan 300 mm weep, metal body with louvers complete all as specified and directed Make : Crompton Ventilier or wquivalent in Bajaj, Havells, Usha 11/SR/61SA/BLDG/2021-22/Q3W:2

Supply and fix sheet metal enclosure complete with metallic plug and socket heavy duty moduler type 3 pin (2P + Earth), 25 amp rating single phase 240 volts complete with MCB SP 25 amp “C” series (Make :Havells/HPL/Anchor/havells(std) 12/REV/61SA/Q3W/2021-22: 2

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including concealed PVC conduit medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings

One light/fan/ bell point controlled by one, one way switch. 23/MIN/61SA/Q3W/21-22: 8

One 3 pin 5 Amp socket outlet on independent board with other switches. 23/MIN/61SA/Q3W/21-22: 2

One three pin 5 Amp socket on same board with other switches. 23/MIN/61SA/Q3W/21-22: 2

All as per Item No 218 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 23/MIN/61SA/Q3W/21-22: 2

Supply&.Fixing only Switch moduler type on top covers (catered in point wiring above):-

Single pole, one way 6 Amp rating. 23/MIN/61SA/Q3W/21-22: 12

Single pole, one way 16 Amp rating. 23/MIN/61SA/Q3W/21-22: 2

S&F only Socket outlet multipurpose use, on top covers (catered in point wiring above) :- Make- Havells (std)/Polycab/Anchor/C & S

5 Pin 6 Amp 23/MIN/61SA/Q3W/21-22: 4

6 Pin 16 Amp 23/MIN/61SA/Q3W/21-22: 2

M&L Ceiling rose surface bakelite 65x50mm, three terminals. Make Anchor/Legrand/Crabtree 23/MIN/61SA/Q3W/21-22: 5

Supply & fix T5 integrted batten LED Light fittings 1 x 20 W ,240 volt( size-4 feet/1136 mm) long life, surface/wall mounting IP 20, luminaire per watt (Minium) extruded alluminium housing with frosted PMMA diffuser with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton/Bajaj/Wipro/ Philips/CG /Surya roshni 23/MIN/61SA/Q3W/21-22: 3

S&F lamp holder PVC body complete all as specified and directed with 01xLED bulb 9 watt 23/MIN/61SA/Q3W/21-22: 1

S&F Ceiling fan 1200 mm sweep complet 5 star rating all as specified and directed Make: Havells, khaitan, Usha 23/MIN/61SA/Q3W/21-22: 1

S &F exhaust fan 300 mm sweep complet 5 star rating all as specified and directed Make: Havells, khaitan, Usha 23/MIN/61SA/Q3W/21-22: 1

S&F in repair factory made, sheet distribution boards, SP&N 4 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating :- 23/MIN/61SA/Q3W/21-22: 1

S&F in repair MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

(a) SP 5 to 32 amps 23/MIN/61SA/Q3W/21-22: 2

(b) SPN 32 to 63 amps. 23/MIN/61SA/Q3W/21-22: 1

M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit/casing capping and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. 23/MIN/61SA/Q3W/21-22: 12

S&F surface mounted LED Mirror light fitting 6 W LED Warmwhite waterproof curve, antique design with fine finishing provide with high power LED, energy saving ,lower power consumption, no RF interference, environmental friendly and recyclable, easy for installation water proof LED Driver suitable for bathroom, bedroom pre-wired twin core twisted flexible copper conductor cable with suitable size as per sample and as directed by engineer in charge 23/MIN/61SA/Q3W/21-22: 2

S&F angle holder, insulated polycabonate body with back plate complete. 10/SR/61SA/BLDG/2021-22/Q3W:20

S&F Energy saving envirnmental friendly, LED Light fittings 1 x 20 W 1200mm E lite LED Curve, high lumen batten with efficacy of 100+ lumens , impact proof,surface/wall mounting with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Crompton Cat No LCTLN-20-NW or equivalent in Syska/Havells 10/SR/61SA/BLDG/2021-22/Q3W:225

S&F Factory made, sheet distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 r of the under mention rating

(a) SP&N12 ways 10/SR/61SA/BLDG/2021-22/Q3W:15

Supply and Fixing security lights LED 30 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniformlight spread cames LED technology of Britelite. including bracket made out of suitable size of GI medium grade tubing and fixed with clamps nuts and bolts, washer complete all as specified . Make- CG cat NoLSTS-30-CDL-M , HAVELLS ,Syska and Phillips 10/SR/61SA/BLDG/2021-22/Q3W:10

UNIVERSAL INFRAPROJECT PVT LTD

JAGDAMBA CONSTRUCTION COMPANY

M/S JALANDRA CONSTRUCTIONS