Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.1 LAccepted-AOC 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L1 | Accepted-AOC The quoted amount of L1 bidder is found competitive and reasonable overall, hence accepted | |
| 2 | L2₹41.8 L+₹6.9 L (19.7%)Rejected-AOC | L2 | Rejected-AOC Being not the lowest bidder | |
| 3 | L3₹43.9 L+₹9.0 L (25.7%)Rejected-AOC 63 2ND MAIN ROAD NGO COLONY ADAMBAKKAM CHENNAI 600 088 | CHENNAI | CHENNAI | TAMIL NADU | 600088 | L3 | Rejected-AOC Being not the lowest bidder |
| Sl No | Description | Qty | Unit | EVEREST ENGINEERING WORKS L3 | RK ENTERPRISES L1 | M/S.RANGA AND CO L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavating in trenches, n.exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft / hard soil complete all as specified and directed.
Note: The Excavation by manual means will only be allowed in locations where existing cables, pipe lines etc crossing the line of excavation. The rate quoted shall be deemed to be inclusive of the same. | 101 | Cum | 240 ₹24,240 | 220 ₹22,220 Lowest | 257 ₹25,957 |
| 2.00 | Returning filling in using excavated soil including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed. | 71 | Cum | 70 ₹4,970 | 100 ₹7,100 | 68 ₹4,828 Lowest |
| 3.00 | Removal of surplus excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. | 30 | Cum | 80 ₹2,400 Lowest | 90 ₹2,700 | 86 ₹2,580 |
| 4.00 | Boring holes under road pavement by bocky manually in any type of soil upto 200 mm bore complete all as specified and directed by Engr-in-Charge. | 150 | RM | 2,000 ₹3,00,000 | 250 ₹37,500 Lowest | 1,850 ₹2,77,500 |
| 5.00 | Supplying, laying, jointing, testing and commisioning of DI Pipe as per IS 8329/2000 ISI marked, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches including taking down old unserviceable pipe line complete all as specified and as directed at site for the following sizes :-
Note : - Earth work excavation etc and Joints shall be measured and paid separetely | 10 | Each | - | - | - |
| 5.01 | 80mm bore | 350 | RM | 1,410 ₹4,93,500 | 1,200 ₹4,20,000 Lowest | 1,310 ₹4,58,500 |
| 5.02 | 100mm bore | 400 | RM | 1,400 ₹5,60,000 Lowest | 1,400 ₹5,60,000 Lowest | 1,490 ₹5,96,000 |
| 5.03 | 150mm bore | 50 | RM | 2,200 ₹1,10,000 | 1,600 ₹80,000 Lowest | 2,300 ₹1,15,000 |
| 5.04 | 200mm bore | 25 | RM | 3,800 ₹95,000 | 1,700 ₹42,500 Lowest | 3,650 ₹91,250 |
| 6.00 | Material and Labour for CI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and as directed. | 10 | Each | - | - | - |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Aug 2025, 6:00 pmClosed
Garrison Engineer, St.Thomas Mount, Chennai
Garrison Engineer, St.Thomas Mount, Old MH Complex, Rudra Road, Chennai-600 016
REPAIRS / MAINTENANCE AND IMPROVEMENT OF EXTERNAL WATER SUPPLY LINE AT OTA INSIDE AND ALLIED WORKS UNDER GE STM CHENNAI
2025_MES_721587_1
8185/E8
Open Tender
Construction Works
Item Rate
270 days
Garrison Engineer, St.Thomas Mount
All as per NIT
6 documents required · 6 mandatory
₹500
Yes
Garrison Engineer, St.Thomas Mount, Chennai
₹80,000
Yes
28 Sept 2025
19 Jul 2025
25 Aug 2025
19 Jul 2025
18 Aug 2025
4 Aug 2025
19 Jul 2025 - 26 Jul 2025
Amount
Excavating in trenches, n.exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft / hard soil complete all as specified and directed. Note: The Excavation by manual means will only be allowed in locations where existing cables, pipe lines etc crossing the line of excavation. The rate quoted shall be deemed to be inclusive of the same.
Returning filling in using excavated soil including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed.
Removal of surplus excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
Boring holes under road pavement by bocky manually in any type of soil upto 200 mm bore complete all as specified and directed by Engr-in-Charge.
Supplying, laying, jointing, testing and commisioning of DI Pipe as per IS 8329/2000 ISI marked, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches including taking down old unserviceable pipe line complete all as specified and as directed at site for the following sizes :- Note : - Earth work excavation etc and Joints shall be measured and paid separetely
80mm bore
100mm bore
150mm bore
200mm bore
Material and Labour for CI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and as directed.
CI fittings/specials up to 100 mm bore
CI fittings/specials up to 200 mm bore
Material and Labour for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 9523 complete all as specified and directed by Engr-in-Charge.
DI fittings/specials up to 100 mm bore
DI fittings/specials up to 200 mm bore
Material and labour for Run lead joint including jointing material for CI/DI pipe of following size/bore:- Note : - Earth work excavation etc and Joints shall be measured and paid separetely
80mm bore
100mm bore
150mm bore
200mm bore
Supply, laying, jointing, welding & testing MS Pipe (Heavy duty class 'C') 6mm thick laid in trenches or on floors for connections to centrifugal pump sets for suction, pump to header and to connect out going water main CI/DI/MS pipe line including taking down old unserviceableMS pipe any size complete all as specifoied and as directed. Note:- (a) Earth work excavation etc shall be measured and paid separetely (b) MS Flanges and Flange joints complete with jointing materials shall be measured and paid separately.
80mm bore
100mm bore
150mm bore
200mm bore
250mm bore
M&L for Flanged Joints with rubber or fibre board gasket including nuts, bolts and double washers of following sizes complete all as specified and as directed.
50mm bore
80mm bore
100mm bore
150mm bore
200mm bore
250mm bore
Supply and fixing, MS flanges of following sizes not less than 16 mm thick duly welded on ends of MS pipe all as specified and as directed
50mm bore
80mm bore
100mm bore
150mm bore
200mm bore
250mm bore
Supply, fixing, jointing & testing Cast Iron sluice valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceablesluice valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. Make: Zoloto/Kirloskar/Leader/Sant
50mm bore
80mm bore
100mm bore
150mm bore
200mm bore
250mm bore
Supply, fixing, jointing and testing of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unserviceableNRVcomplete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. Make: Zoloto/Kirloskar/Leader/Sant
50mm bore
80mm bore
100mm bore
150mm bore
200mm bore
250mm bore
Supply and fixing CI foot valve flanged ends, swing type opration with rubber sheet, as per IS:4038 including taking out unserviceablefoot valve all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. Make: Zoloto/Kirloskar/Leader/Sant
50mm bore
80mm bore
100mm bore
Supply, installation and testing of flanged ends water meter ISI marked woltman type, Class 'B' of following sizes and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unserviceablewater meter complete all as specified and directed at site by the Engr-in-Charge. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item. Make: Capstan/lota/AQUA-RE
50mm bore
80mm bore
100mm bore
150mm bore
200mm bore
250mm bore
Supplying & fixing gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778 of following sizes including taking out unserviceable gate valves complete all as specified and as directed. Make: Zoloto/Kirloskar/Leader/Sant
15mm bore
20mm bore
25mm bore
40mm bore
50mm bore
80mm bore
Labour for cutting, welding of CI/DI/GI/MS pipe in position for reducing to required length for insertion of new tees, branches, buterfly valve (wafer type) etc of upto 200 mm bore complete all as specified and as directed.
Material and labour for fixing of water pressure gauge (0-5 Kg/cm square) 100mm dial size including boring, threading, welding in CI/DI/GI/MS of any sizes and connected with suitable size of U type MS/CP pipe with ON OFF cock all as specified and as directed
M&L for plain cement concrete 1:3:6, type C-2 as in foundations, filling and mass concrete complete including demolition of old PCC and removal from site to distance n.exc 50m all as specified and as directed.
M&L for old size Brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM 1:4 as in brick pillar of required size and shape to support the pipe line including demolition of old brickwork & removing from site all as specified and as directed
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and fair complete all as specified and as directed.
Material and labour for GI tubing 'medium grade' with all accessories including bends, elbow, socket and including taking down old unserviceable GI pipe complete all as specified and directed
15mm bore
20mm bore
25mm bore
40mm bore
50mm bore
80mm bore
Supply, installation and testing flanged ends strainer/dirt box of following sizes with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclined/ vertical position, including taking out unserviceable strainer/dirt box complete all as specified and as directed. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item. Make: Zoloto/Kirloskar/Leader/Sant
50mm bore
80mm bore
100mm bore
150mm bore
200mm bore
Supply, fixing, jointing & testing butterfly valve (wafer type) of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, inserting new one complete all as specified and as directed.
80mm bore
100mm bore
150mm bore
200mm bore
Labour only for attending and identifying day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply, including noting of the complaints in complaint register complete all as specified and directed. Note :- (i) The quoted rate shall deemed to be including the cost of labour involved in repairing the item. (ii) The complaints shall be attended and the defects shall be rectified by a team of experienced Plumber as applicable assisted with adequate number of helpers as directed but a minimum persons required under this item shall be as under :- 1. Pipe Fitter / Plumber (Semi-skilled) and Helper (un-skilled) as required. (iii) Engineer-in-charge may decided to depute team per day to complete the complaint within 08 hours. Per day execution of complaints shall be measured and paid. (iii) All T&P required for attending the complaints shall be provided by the contractor without any extra cost of govt. (iv) The Pipe Fitter shall always be in possession of die set complete with cutters, Taps, Pipe wrench, Chain wrench, Caulking tools, complete set of spanners and ladders etc as required at site. (iv) The quoted rate shall deemed to be include the cost of fittings like elbow, tees, union, socket, nipple and reducer etc upto 80 mm dia and GI pipe upto 5 mtrs length.
M & L for attending break down/ leakages of rising main pipe line including PCC plinth / bituminous road Cutting in various area (civil/army area) earth work by JCB as required & taking out GI/CI/DI pipe line of any size and relaying of pipes on location after rectification of leakage and making good with sand / PCC 1:2:4 type B-2 using 40mm graded stone aggregates matching with the existing surfaces including removing extra earth etc away from the site to a distance n. exc 50m complete all as specified and as directed. Note:-1. Cost of liaisoning with civil authority/municipal corporation & earth moving plant/JCB are included in item rates. 2. Cost of major materials i.e pipe, fitting and fixtures will be measured and paid separately with relevant items.
Supply and fixing Cast Iron Air Valves with two air outlets, confirming to IS 14845 of size 150 mm dia bore and fixing up in Cast Iron/Ductile Iron water supply mains of size 150 mm dia in and including necessary fittings and taking down old any one complete all as specified and as directed.
Supply and fixing in repair sprinkler irrgation system 360 degree, typically operate at pressures ranging from 30 to 50 PSI (pounds per square inch) designed to throw water 50-90 feet at a flow rate of 18-45 gallons per minute complete all as specified and as directed.
Supply and fixing UPVC pipe of size 50 mm bore with all accessories including bends, elbow, socket and including taking down old unserviceable CPVC pipe complete all as specified and directed.
Supply and fixing Cast Iron Air Valves with two air outlets, conforming to IS 14845 of size 150 mm dia bore and fixing up in Cast Iron/Ductile Iron water supply mains of size 150 mm dia in and including necessary fittings and taking down old any one complete all as specified and as directed.
Supply only PTMT float valve with epoxy coated aluminium rod and high density plastic ball of fwg sizes including taking down old unsv float valve complete all as specified and as directed.
15mm bore
20mm bore
25mm bore
40mm bore
Supply only 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe/GI pipe of size 15mm bore complete all as specified and directed
M/S.RANGA AND CO (BID ID -3389391)
EVEREST ENGINEERING WORKS (BID ID -3397188)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .