Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC 110 245 NEHRU NAGAR KANPUR UTTAR PRADESH 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.7 L+₹83,377.50 (2.09%)Rejected-Finance BATHAIPAR RAWATPAR DEORIA DEORIA UTTAR PRADESH 274001 UDYAM UP 21 0039531 | DEORIA | UTTAR PRADESH | 274001 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹41.8 L+₹2.0 L (5.03%)Rejected-Finance WARD NO 11 HOUSE NO 305 JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | PARDEEP SHARMA L3 | ATUL TRADING CO L2 | SHARMA SALES CORPORATION L1 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for dismantling of Inlet and outlet connections from existing old header including Sluice valves , NRVs, complete all as specified and directed by Engineer-in-Charge. | 2 | Each Job | 800 ₹1,600 | 500 ₹1,000 Lowest | 2,170 ₹4,340 |
| 2.00 | Fixing only sluice valve with flanged ends, any pattern of size 150mm dia obtained from Item No 01 complete all as specified and directed by Engineer-in-Charge. | 1 | Each | 400 ₹400 | 100 ₹100 Lowest | 560 ₹560 |
| 3.00 | Description all as per Ser Item No 2.00 here-in-before, but size of dia 100 mm | 1 | Each | 400 ₹400 | 50 ₹50 Lowest | 470 ₹470 |
| 4.00 | Supply and fixing MS ERW pipe of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (01 x 150 mm/1x 80mm) ,flow side and 03 outlets from distribution side (02x 80mm,1 x50mm)suitable to MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 1 | Each Job | 38,000 ₹38,000 | 10,000 ₹10,000 Lowest | 38,000 ₹38,000 |
| 5.00 | Supply and fixing MS ERW pipe of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (2x 150 mm ) from pump side and 03 outlets from distribution side ( 01 x 150mm, 01 x 100mm, 02 x80 mm, dia MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 2 | Each job | 44,000 ₹88,000 | 12,000 ₹24,000 Lowest | 38,000 ₹76,000 |
| 6.00 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pillar complete all as specified and directed by Engineer-in-Charge. | 12 | Cum | 3,000 ₹36,000 | 2,600 ₹31,200 | 2,009 ₹24,108 Lowest |
| 7.00 | Grouting of nut bolts in the PCC pillar to support the header on both side with clamps, complete all as specified and directed by Engineer-in-Charge. | 4 | Each Job | 800 ₹3,200 | 500 ₹2,000 | 470 ₹1,880 Lowest |
| 8.00 | Supply fabrication and fixing MS joints like Flanged, bends, Tapers, tail piece (any type) caps, plugs for 100 mm to 300 mm bore pipe complete all as specified and directed by Engineer-in-Charge. | 250 | Kgs | 104 ₹26,000 | 100 ₹25,000 Lowest | 100 ₹25,000 Lowest |
| 9.00 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of soft/dense soil. complete all as specified and directed by Engineer-in-Charge. | 394.65 | Cum | 120 ₹47,358 Lowest | 120 ₹47,358 Lowest | 182 ₹71,826.3 |
| 10.00 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge. | 334.38 | Cum | 20 ₹6,687.64 | 20 ₹6,687.64 | 8 ₹2,675.06 Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
3 Jun 2026, 6:00 pmClosed
GE (Utilities) Udhampur
GE (Utilities) Udhampur PO-Garhi Pin-182121
Repair/Maint of pumping system, pipe lines and valves at ASC Bde, 31 RR, Engr Regt, Krimchi Complex and maint of distribution header, sluice valve, non return valve, Air release valve and allied works at various locations under GE (Utilities) Udhampu
2026_MES_765165_1
GE/U-60/2026-27
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (Utilities) Udhampur
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Utilities) Udhampur
₹96,000
11 Jul 2026
13 May 2026
5 Jun 2026
13 May 2026
3 Jun 2026
27 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for dismantling of Inlet and outlet connections from existing old header including Sluice valves , NRVs, complete all as specified and directed by Engineer-in-Charge. | 2 | Each Job | - | - |
| 2 | Fixing only sluice valve with flanged ends, any pattern of size 150mm dia obtained from Item No 01 complete all as specified and directed by Engineer-in-Charge. | 1 | Each | - | - |
| 3 | Description all as per Ser Item No 2.00 here-in-before, but size of dia 100 mm | 1 | Each | - | - |
| 4 | Supply and fixing MS ERW pipe of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (01 x 150 mm/1x 80mm) ,flow side and 03 outlets from distribution side (02x 80mm,1 x50mm)suitable to MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 1 | Each Job | - | - |
| 5 | Supply and fixing MS ERW pipe of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (2x 150 mm ) from pump side and 03 outlets from distribution side ( 01 x 150mm, 01 x 100mm, 02 x80 mm, dia MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 2 | Each job | - | - |
| 6 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pillar complete all as specified and directed by Engineer-in-Charge. | 12 | Cum | - | - |
| 7 | Grouting of nut bolts in the PCC pillar to support the header on both side with clamps, complete all as specified and directed by Engineer-in-Charge. | 4 | Each Job | - | - |
| 8 | Supply fabrication and fixing MS joints like Flanged, bends, Tapers, tail piece (any type) caps, plugs for 100 mm to 300 mm bore pipe complete all as specified and directed by Engineer-in-Charge. | 250 | Kgs | - | - |
| 9 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of soft/dense soil. complete all as specified and directed by Engineer-in-Charge. | 394.65 | Cum | - | - |
| 10 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge. | 334.38 | Cum | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
TENDER60.pdf
Tender Documents • 1.29 MB
BOQ_856994.xls
BOQ • 13.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .